2015 MITSUBISHI L200 ECO mode

To listen to tracks from a de-
vice connected via Bluetooth ®
E00762700225
1. Press the PWR button (1) to turn on the
audio system. The system turns on in the last mode used.
2. Press the CD button (8) several times to
switch to the BT-A (Bluetooth ®
) mode.
The mode changes as follows every time the CD button is pressed.
CD mode → USB (iPod) mode → Blue-
tooth ®
mode
NOTEl For vehicles equipped with Auxiliary Audio
connector (RCA), pressing and holding theCD button for 2 seconds or more switches
the system to the AUX mode.
3. Connect your Bluetooth ®
device.
Refer to “Connecting the Bluetooth® 2.0
interface and Bluetooth® device” on page 7-90.
4. Playback starts automatically.
NOTEl Depending on the connected device, the
playback may not start automatically.
In this case, operate the connected device to
start the playback.To stop the playback (if suppor-
ted by the device)
E00762800079
To stop the playback, press and hold the
button (9) until you hear a beep.
To restart the playback, press the
button
(10).
To pause the playback (if sup-
ported by the device)
E00762900083
To pause the playback, press the button
(9).
To restart the playback, press the
button
(10).
To fast-forward/reverse the
track (if supported by the de- vice)
E00765600010
Fast-forward
To fast-forward the current track, press the
button (6). While the button is pressed, the
track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the
button (7). While the button is pressed, the
track will be fast-reversed.
To select a track (if supported
by the device)
E00763000094
Track up
Press the button (6) repeatedly until the
desired track number appears on the display.
Track down
Press the button (7) repeatedly until the
desired track number appears on the display.
NOTEl Pressing the button (7) once during the
song will cause the audio system to restart
playback from the beginning of the song.
To play tracks from a Bluetooth ®
device (audio system type 1) *
7-42OKTE15E3For pleasant driving7

To activate the external audioinput mode
1. Use a commercially available audio ca-
ble to connect the audio equipment to
the external audio input connector.
2. Press the CD button (D) for more than 2
seconds. The display (E) will show
“AUX” and then the external audio input
mode will be activated.
3. To deactivate the external audio input
mode, press the RADIO button (F) orthe CD button (D) to switch to another
mode.
CAUTIONl Do not operate the connected audio equip-
ment while driving.
This could distract you and an accident might occur.NOTEl The connected audio equipment cannot be
operated with the vehicle’s audio system.
l Depending on the connected audio equip-
ment, it may produce noise from the speak- ers.
l Use the connected audio equipment’s own
power source, such as its battery.
Noise may be produced from the speakers if the connected audio equipment is used while
charging it using the accessory socket of the vehicle.
l Do not activate the external audio input
mode when no audio equipment is connec-
ted.
Otherwise, noise may be produced from the
speakers.
l Connect audio equipment when the external
audio input mode is deactivated or lower the
vehicle’s speaker volume before connecting it.
Noise may be produced from the speakers if
audio equipment is connected after the exter-
nal audio input mode is activated.
l For information on how to connect and oper-
ate the audio equipment, refer to the owner’s manual for the equipment.Steering wheel remote
control switch (audio system type 1) * E00710002034
The remote control switches are located on the left side of the steering wheel.
These switches can be used when the ignition
switch is in the “ON” or “ACC” position.
1- Volume up button
2- Volume down button
3- PWR (ON-OFF)/Mode change button
4- Seek up/Fast-forward/Track up/File up button
5- Seek down/Fast-reverse/Track down/ File down button
Steering wheel remote control switch (audio system type 1) *
7-44OKTE15E3For pleasant driving7

NOTElDo not push two or more of the steering
wheel remote control switches at the same
time.
To turn on the power
PWR ON-OFF button — 3
When the power is off, press this button to
turn the power on.
To turn the power off, press this button for 2
seconds or longer.
To adjust the volume
Volume up button — 1
The volume will increase when this button is
pressed.
Volume down button — 2
The volume will decrease when this button is
pressed.
Mode selection
Press the mode change button (3) to select the desired mode.
The mode changes in the following order.
FM1 → FM2 → FM3 → MW → LW → CD
→ USB or iPod* → Bluetooth ®*
→ FM1
To listen to the radio
To select FM/MW/LW mode
Press the mode change button (3) to select the desired mode.
(AM/FM or LW/MW/FM)
Automatic radio tuning
Seek up button — 4/Seek down button — 5
After pressing these buttons, the reception of the selected station will begin.
To listen to a CD
To fast-forward/fast-reverse the
disc
To fast-forward or fast-reverse the disc, press
the fast-forward button (4) or the fast-reverse button (5).

Fast-forward button — 4
You can fast-forward the disc by pressing the
fast-forward button. While the button is kept
pressed, the disc will be fast-forwarded.

Fast-reverse button — 5
You can fast-reverse the disc by pressing the
fast-reverse button. While the button is kept pressed, the disc will be fast-reversed.NOTEl In the case of an MP3 CD, you can fast-for-
ward and fast-reverse tracks in the same
folder.
To select a desired track
Track up button — 4
Press the button repeatedly until the desired track number appears on the display.

Track down button — 5
Press the button repeatedly until the desired track number appears on the display.
To listen to an iPod
Press the mode change button (3) and select
iPod mode.
To select a desired track
Track up button — 4
Press the button repeatedly until the desired track number appears on the display.
Steering wheel remote control switch (audio system type 1) *
7-45OKTE15E3For pleasant driving7

Error codes (audio system type 1)E00710102396
If an error code appears in the display, take action in accordance with the table below.ModeError displayProblemDescriptionRepairCDNO DISCNo disc inser- tedDisc is not in CD player.Insert disc.ERROR 01Focus errorDisc is not loaded correctly, or condensation
on disc.Insert disc with label facing up.
Remove moisture from disc.ERROR 02Disc errorDisc is dirty, scratched, or deformed; or exces- sive vehicle vibration.Clean or replace disc. Retry when vibrations
stop.ERROR 03Mechanism
errorLoading or eject error. Pick-up is out of posi- tion.Eject disc and reload. If disc will not eject,
have the equipment inspected.iPodNO SONGThere are no playable music files.Record music files in the iPod.VERSION ERROR (Blink)The iPod or its software cannot be recognized.Connect a supported iPod.USB BUS POWER (Blink)An overcurrent or other power-supply error has occurred.Remove the iPod.
Have the vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point.USB LSI ERROR (Blink)Internal device errorsHave the vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point.CONNECT RETRY (Blink)If the iPod indicator illuminates, the iPod can- not be authenticated.Reconnect the iPod.If the iPod indicator goes out, it shows theUSB communication error.Reconnect the iPod correctly.
If this error is displayed again, have the vehi-
cle inspected at a MITSUBISHI MOTORS
Authorized Service Point.
Error codes (audio system type 1)
7-47OKTE15E3For pleasant driving7

ModeError displayProblemDescriptionRepairUSBNO SONGThere are no playable music files.Record music files in the format supported by
the USB memory device.USB FILE ERROR (Blink)The file cannot be played.The file is protected by copyrights, etc. An er-
ror is displayed for several seconds, and then
the next playable file is played automatically.UNSUPPORTED FORMAT (Blink)The USB memory device format cannot be
recognized.Remove the USB memory device.USB BUS POWER (Blink)An overcurrent or other power-supply error
has occurred.Remove the USB memory device.
Have the vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point.USB LSI ERROR (Blink)Internal device errorsHave the vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point.CONNECT RETRY (Blink)USB communication errorReconnect the USB memory device correctly.
If this error is displayed again, have the vehi-
cle inspected at a MITSUBISHI MOTORS
Authorized Service Point.OtherERROR HOTHigh tempera-
tureInternal protection against high temperatures.Allow CD player to cool by waiting about 30 minutes.ERRORCommunica-
tion or power
supply errorCommunication error between external device and audio equipment.
Power supply error of external device.Consult a MITSUBISHI MOTORS Author-
ized Service Point.

Error codes (audio system type 1)
7-48OKTE15E3For pleasant driving7

lDo not use a ball point pen, felt pen,
pencil, etc. to write on the label surface
of the disc.
l Do not put additional labels (A) or stick-
ers (B) on compact discs. Also, do not
use any compact disc on which a label or
sticker has started to peel off or any compact disc that has stickiness or othercontamination left by a peeled-off label or sticker. If you use such a compact
disc, the CD player may stop working properly and you may not be able to eject the compact disc.Notes on CD-Rs/RWs
E00725100039
l You may have trouble playing back
some CD-R/RW discs recorded on CD
recorders ( CD-R/RW drives), either due
to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc
surface.
l CD-R/RW
discs are less resistant to high
temperatures and high humidity than or- dinary music CDs. Leaving them inside
a vehicle for extended periods may dam- age them and make playback impossible.
l The unit may not successfully play back
a CD-R/RW that was made by the com-
bination of writing software, a CD re-
corder ( CD-R/RW drive) and a disc if
they are incompatible with one another.
l This player cannot play the
CD-R/RW
discs if the session is not closed.
l This player cannot play
CD-R/RW discs
which contain other than CD-DA or
MP3 data (Video CD, etc.).
l Be sure to observe the handling instruc-
tions for the CD-R/RW disc.WARNINGl Operating the CD player in a manner oth-
er than specifically instructed herein mayresult in hazardous radiation exposure.
Do not remove the cover and attempt to repair the CD player by yourself. There
are no user serviceable parts inside. In case of malfunction, we recommend you
to have it checked.LW/MW/FM radio/CD
player (audio system type
2)* E00708503459
The audio system can only be used when the operation mode of the power switch is in ON
or ACC.NOTEl To listen to the audio system while the en-
gine is stopped, turn the ignition switch to
the “ACC” position.
l If a cellular phone is used inside the vehicle,
it may create noise from the audio equip-
ment. This does not mean that anything is wrong with your audio equipment. In such acase, use the cellular phone at a place as far
away as possible from the audio equipment.
l If foreign objects or water get into the audio
equipment, or if smoke or a strange odour
comes from it, immediately turn off the au-
dio system. We recommend you to have it checked. Never try to repair it by yourself.
Avoid continuous usage without inspection by a qualified person.
l The audio amplifier (if so equipped) is loca-
ted under the front right seat.
Do not subject the amplifier to a strong im-
pact. It could damage the amplifier or mal- functioning could result.
LW/MW/FM radio/CD player (audio system type 2)*
7-51OKTE15E3For pleasant driving7

Important Points on Usage
E00735500023
iPod/iPhone Playback Func- tion*
l This product supports audio playback
from iPod/iPhone devices, however dif-fering versions mean that playback can-not be guaranteed.
l Please be aware that depending on the
iPod/iPhone model or version, operation
may differ.
How to Clean
E00735700025
l If the product becomes dirty, wipe with
a soft cloth.
l If very dirty, use a soft cloth dipped in
neutral detergent diluted in water, and then wrung out. Do not use benzene,
thinners, or other chemical wipes. This
may harm the surface.
Trademarks
E00735801108
l Product names and other proper names
are the trademarks or registered trade- marks of their respective owners.
l Furthermore, even if there is no specific
denotation of trademarks or registered
trademarks, these are to be observed in
their entirety.
“Made for iPod”, “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards.
iPhone, iPod, iPod classic, iPod nano,
and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.
Apple is not responsible for the opera- tion of this device or its compliance with
safety and regulatory standards.NOTEl iPod and iTunes licensing allows individual
users to privately reproduce and play back
non- copyrighted material as well as material
that may be legally copied and reproduced.
Infringement of copyright is prohibited.
l Supported models for equipment by type
(vehicles with a Bluetooth 2.0 ®
interface)
will vary. For details, see the Johnson Con- trols, Inc. website.
LW/MW/FM radio/CD player (audio system type 2)*
7-52OKTE15E3For pleasant driving7

*1
:Do not include other than
MP3/WMA/AAC files. However, if
storing many tracks within the same
folder, these may not be recognized
even if less than the maximum number
of tracks. In these cases, divide the
tracks up into multiple folders.NOTEl The order in which folders and audio files
are displayed on this product may be differ-ent to how they are displayed on a computer.What Is MP3?
E00736400029
MP3 is the abbreviation of “MPEG-1 Audio
Layer 3”. MPEG is an abbreviation of “Mo-tion Picture Experts Group”, and this is a vid-
eo compression standard used in video CDs, etc.
MP3 is one of the audio compression meth-
ods contained in the MPEG audio standard,
and reduces the quality of sounds that are be- yond the auditory resolution of the human ear
and that are hidden by louder sounds, thus
creating high-quality data with a lower data
size.
This can compress CD audio to approximate- ly 1/10 its original data size without percepti-
ble loss, approximately 10 CDs can be writ-
ten to a single CD-R/RW disc.
CAUTIONl MP3 files different to the standards at right
may not play back correctly, or file/folder names may not be displayed correctly.
Standards for MP3 Files That
Can Be Played Back
Specifications for MP3 files that can be
played are as shown below.
ItemDetailsSpecificationMPEG-1 AUDIO LAYER3MPEG-2 AUDIO LAYER3Sampling fre- quency [kHz]MPEG-1: 32/44.1/48MPEG-2: 16/22.05/24Bit rate [kbps]MPEG-1: 32 to 320MPEG-2: 8 to 160VBR (varia- ble bit rate)SupportChannel modeStereo/ Joint stereo/ Dual
channel/ MonauralFile exten- sionmp3ItemDetailsSupported taginformationID3 tag Ver. 1.0, Ver. 1.1,
Ver. 2.2, Ver. 2.3, Ver. 2.4
(ISO-8859-1, UTF-16 (Uni-
code)), Titles, Artist name,
Album nameMaximum number of characters
that can be
indicated on the display64 charactersWhat Is WMA?
E00736601031
WMA is the abbreviation of Windows MediaAudio, and this is an audio compression for-
mat from Microsoft. This is a compression format that has a higher compression ratio
than MP3.
NOTEl Microsoft, Windows Media, and Windows
are registered trademarks of Microsoft Cor-
poration (USA) and in other countries.CAUTIONl WMA supports digital rights management
(DRM). This product cannot play back WMA files protected using this system.
Audio Files (MP3/WMA/AAC) (audio system type 2)
7-58OKTE15E3For pleasant driving7