2015 MERCEDES-BENZ C-Class SEDAN wheel bolt torque

Trunk load (maximum)
...................... 403
Turn signals Changing bulbs (front) ................... 132
Changing bulbs (rear ).................... 132
Display message ............................ 264
Switching on/of f........................... 126
Type identification plate
see Vehicle identification plate U
Unlocking Emergency unlocking ....................... 88
From inside the vehicle (central
unlocking button) ............................. 87 V
Vanity mirror (in the sun visor) ........ 308
Vehicle Correct use ...................................... 27
Data acquisition ............................... 28
Display message ............................ 280
Equipment ....................................... 23
Individual settings .......................... 244
Limited Warranty ............................. 27
Loading .......................................... 369
Locking (in an emergency) ............... 89
Locking (SmartKey ).......................... 81
Lowering ........................................ 386
Maintenance .................................... 24
Operating safety .............................. 25
Parking for a long period ................ 177
Pulling away ................................... 160
Raising ........................................... 382
Reporting problems ......................... 27
Securing from rolling away ............ 382
Towing away .................................. 351
Transporting .................................. 353
Unlocking (in an emergency) ........... 88
Unlocking (SmartKey )...................... 81
Vehicle data ................................... 403
Vehicle data
Roof load (maximum) ..................... 403
Trunk load (maximum) ................... 403
Vehicle dimensions ........................... 403
Vehicle emergency locking ................ 89Vehicle identification number
see VIN
Vehicle identification plate .............. 396
Vehicle level AIRMATIC ...................................... 198
Display message ............................ 271
Vehicle maintenance
see ASSYST PLUS
Vehicle tool kit .................................. 340
Video Operating the DVD ......................... 241
VIN ...................................................... 396 W
Warning and indicator lamps ABS ................................................ 286
Brakes ........................................... 285
Check Engine ................................. 291
Coolant .......................................... 291
Distance warning ........................... 293
ESP ®
.............................................. 288
ESP ®
OFF ....................................... 289
Overview .......................................... 34
Parking brake ................................ 290
PASSENGER AIR BAG ...................... 43
Reserve fue l................................... 291
Restraint system ............................ 290
Seat belt ........................................ 284
Steering ......................................... 295
Tire pressure monitor .................... 294
Warranty .............................................. 23
Washer fluid Display message ............................ 282
Wheel and tire combination
see Tires
Wheel bolt tightening torque ........... 386
Wheel chock ...................................... 382
Wheels Changing a whee l.......................... 381
Checking ........................................ 359
Cleaning ......................................... 333
Important safety notes .................. 358
Interchanging/changing ................ 381
Mounting a new whee l................... 385
Mounting a whee l.......................... 381
Removing a whee l.......................... 385 20
Index

X
To remove: take socket0044and lug wrench
0087 from the vehicle tool kit (Y page 340).
X Position socket 0044on hub cap 0043.
X Attach lug wrench 0087to socket 0044and
loosen hub cap 0043counter-clockwise.
X Remove hub cap 0043.
X To install: before installing, check hub
cap 0043and the wheel area for soiling and
clean if necessary.
X Put hub cap 0043in position and turn until it is
in the right position.
X Position socket 0044on hub cap 0043.
X Attach lug wrench 0087to socket 0044and
tighten hub cap 0043.
The tightening torque must be
18 lb-ft (25 Nm).
i Note
that the hub cap should be tight-
ened to the specified torque of 18 lb-ft
(25 Nm). Mercedes-Benz recommends
that you have the hub cap installed at a
qualified specialist workshop. X
Using a lug wrench 0087, loosen the bolts on
the wheel you wish to change by about one full turn. Do not unscrew the bolts com-
pletely. The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
Vehicles with AMG equipment: the vehicle
has covers installed to protect the vehicle
body next to the jacking points on the outer
sills. X
Vehicles with AMG equipment: fold
cover 0085upwards. X
Position jack 0084at jacking point 0083.384
Changing a wheelWheels and tires

X
Clean the wheel and wheel hub contact
surfaces.
X Slide the wheel to be mounted onto the
alignment bolt and push it on.
X Tighten the wheel bolts until they are fin-
ger-tight.
X Unscrew the alignment bolt.
X Tighten the last wheel bolt until it is finger-
tight.
Lowering the vehicle G
WARNING
The wheels could work loose if the wheel nuts and bolts are not tightened to the specified
tightening torque. There is a risk of accident.
Have the tightening torque immediately
checked at a qualified specialist workshop
after a wheel is changed. X
Turn the crank of the jack counter-clock-
wise until the vehicle is once again standing
firmly on the ground.
X Place the jack to one side. X
Tighten the wheel bolts evenly in a cross-
wise pattern in the sequence indicated ( 0043
to 0083). The specified tightening torque is
96 lb-ft (130 Nm).
X Turn the jack back to its initial position.
X Stow the jack and the rest of the vehicle
tools in the trunk again.
X Vehicles with AMG equipment: insert the
cover into the outer sill.
X Check the tire pressure of the newly moun-
ted wheel and adjust it if necessary.
Observe the recommended tire pressure
(Y page 361).
When you are driving with the collapsible
spare wheel mounted, the tire pressure loss
warning system or the tire pressure monitor
cannot function reliably. Only restart the tire
pressure loss warning system/the tire pres-
sure monitor when the damaged wheel has
been replaced with a new wheel.
Vehicles with a tire pressure control sys-
tem: all installed wheels must be equipped
with functioning sensors.
When you are driving with the emergency
spare wheel mounted, the tire pressure loss
warning system cannot function reliably. Only restart the tire pressure loss warning system when the defective wheel has been replaced
with a new wheel. Wheel and tire combinations
General notes
! For safety reasons, Mercedes-Benz rec-
ommends that you only use tires and
wheels which have been approved by
Mercedes-Benz specifically for your vehi-
cle. 386
Wheel and tire combinationsWheels and ti
res