2015 MERCEDES-BENZ C-CLASS COUPE phone

Accepting
acall If someon
ecallsy ou when you are in the Tele‐
Tele‐
phone
phone menu,adisplay message appear sinthe
multifunction display.
You can accept acall at any time, eve nifyou are
no tint heTelephone
Telephone menu.
X Press the 6buttonont hesteering wheel
to accept an incoming call.
Rejecting or ending acall You can en
dorrejectac all at any time eve nif
you are no tintheTelephone Telephone menu.
X Press the ~buttonont hesteering wheel
to rejec torendan incoming call.
Selecting an entry in th ephone book X
Press òon thesteering whee ltoo pen the
men ulist.
X Press :or9 on thesteering whee lto
select the Telephone
Telephone menu.
X Confir mbyp ressing aon thesteering
wheel.
X Press :, 9ora to switch to the
phone book.
X Press :or9 to select th enames one
after th eother.
or X To star trap id scrolling: press and hold :
or 9 for longer than on esecond.
The names in th ephone book are displayed
quickl yone after th eother.
If you press and hold the :or9 button
for longer than fiv eseconds, th ename
appear switht he next or previous lette rinitial
lette rint healphabet.
Rapid scrollin gstops when you release the
butto norr eachthe endoft helist.
X If only one telephone number is store
dfor
an ame: press the 6ora buttonto
start dialling.
or
X If there is mor
ethano ne number for a
particular name: press the6ora
butto ntod isplay th enumbers.
X Press :or9 to select th enumber you
want to dial.
X Press the 6ora buttontos tart dial-
ling. or
X To exit th etelephone book: press the~
or % button.
Redialling The on-board computer saves th
elast names or
number sdialle dint heredial memory.
X Press òon thesteering whee ltoo pen the
men ulist.
X Press :or9 on thesteering whee lto
select the Telephone
Telephone menu.
X Confir mbyp ressing aon thesteering
wheel.
X Press the 6buttontos witch to th eredial
memory.
X Press :or9 to select th edesired
nam eorn umber.
X Press the 6ora buttontos tart dial-
ling.
or X To exit th eredial memory: press the~
or % button. Assistance graphic menu
X
Press òon thesteering whee ltoo pen the
men ulist.
X Press :or9 on thesteering whee lto
select the Assistanc egraphic
Assistanc egraphic menu.
X Confir mbyp ressing aon thesteering
wheel.
The multifunction display shows the
DISTRONI CPLUSd istanc edisplay in the
assistanc egraphic.
The assistanc egraphic shows you th estatus
of and/o rinformation from th efollowin gdriv-
ing systems or drivin gsafet ysystems: Menu
sand sub menus
243On-boardcomputer an ddisplays Z

Display messages
Possible causes/consequences and
M
MSolutions Ð
Power steering mal‐ Power steering mal‐
function See Own‐ function See Own‐
er'
sM anual
er' sM anual The powe
rsteering assistanc eisfaulty.
Aw arning tone also sounds.
G WARNING
You will need to use mor eforce to steer.
There is ariskofana ccident.
X Chec kwhether you are able to apply th eextra force required.
If you ar eabletos teer safely:
X Drive on carefully.
X Consult aqualified specialist workshop immediately.
If you ar eunable to steer safely:
X Do no tdrive on.
X Consult aqualified specialist workshop. Ð
Steering malfunc‐ Steering malfunc‐
tio
nS ee Owner's
tio nS ee Owner's
Manual Manual Vehicl
ewithm anual transmission :the electric steering loc kismal-
functioning.
G WARNING
The steering may be locke dbytheelectric steering lock.
There is ariskofana ccident.
X Pull ove rand stop th evehicl esafely as soo naspossible, paying
attention to roa dand traffic conditions.
X Safeguar dthe vehicl eagainst rollin gaway (Y page 172).
X Do no tdrive on.
X Consult aqualified specialist workshop. _
Before Before
starting
starting the
the
engine ,turnt he
engine ,turnt he
steering wheel.
steering wheel. Vehicl
ewithm anual transmission :the electric steering loc kismal-
functioning.
X Remove th ekeyfrom th eignition lock.
X To unloc kthe steering ,movet he steering whee lslightly.
X Inser tthe keyintot he ignition loc kagain. Telephone Telephone
No
Noservice
service Your vehicl
eisoutside th enetwork provider' stransmitter/receiver
range.
X Wait until th emobile phone operational readiness symbol appears
in th emultifunction display. ¥
Top up washer fluid Top up washer fluid The washer flui
dlevel in th ewasher flui dreservoir has dropped below
th em inimum.
X Top up th ewasher flui d(Ypage 325). Display
messages
283On-boardcomputer an ddisplays Z

Adjusting th
evolume X
Turn th ethumbwheel on th eright of th econ-
troller.
The volume is adjusted:
R for th ecurrentl yselected media source
R during traffic or navigation announcements
R in hands-free mod eduring aphone call
Switchin gthe soun don/off This function is no
tavailable for Mercedes-AMG
vehicles wit hselectable AM GPerformance
exhaust system.
X Press th ethumbwheel to th eright of th econ-
troller.
If th eaudio output is switched off ,the status
lin ew ill sho wthe 8 symbol. If you switch
th em edia source or set th evolume, th esound
is automatically switched on.
i Navigation message
swill be hear devenif
th es oun dism uted.
Functions The multimedia system has th
efollowin gfunc-
tions:
R radi omode
R media mod ewithm edia search
R soun dsystems
R navigation system
COMAND Online: navigation via th ehardd rive
Audio 20 :navigation via SD card
R communication functions
R vehicl efunction swiths ystem settings
R favourite sfunctions
Controller The controller in th
ecentre console let syou:
R select men uitems on th edisplay
R ente rcharacters
R select adestination on th emap
R sav eentries
The controller can be:
R turned 3
R slid lef torright1
R slid forward sorback4 R
slid diagonally 2
R presse dbriefl yorp ressedand held 7
Back button You can use the
%buttontoe xitam enuorto
call up th ebasic display of th ecurren toperating
mode.
X To exit th emenu: brieflypress the %
button.
The multimedia system changes to th enext
higher men ulevel in th ecurren toperating
mode.
X To call up th ebasic display: press the%
butto nfor longer than two seconds.
The multimedia system changes to th ebasic
display of th ecurren toperating mode. Touchpad
Switchin gthe touchpad on/off Multimedia system:
X Select Vehicle
VehicleQSy stem set‐
System set‐
tings tingsQ Activate touchpad
Activate touchpad.
The touchpad is activated Oor deactivated
ª.
Operating th etouchpad :
Touch-sensitive surface
; Favourite sbutton
= Calls up audio and telephon emenu( quick
access)
? Return stotheprevious display Operating system
297Multimedia system Z

Enterin
ganaddress Multimedia system:
X Select Navi
NaviQNa vigation
Navigation.
The map displays th ecurren tvehicle position.
X Slide 6thec ontroller.
X Select Destination
DestinationQ Addressentry
Addres sentry.
Ente rana ddress, e.g .asfollows:
R town or postcode, street ,house number
R country, town or postcode
R town or postcode, centre
R street ,tow norp ostcode, junction
X Select Town
Town.
The town in whic hthe vehicle is currently
locate d(curren tvehicle position )isatthetop.
Below this, you will see locations for which
rout eguidance has alread ybeen carried out.
X Ente rthe town.
The Gsymbol: th elocatio niscontained on
th ed igital map multiple times.
X To switch to th elist: slide 5thec ontrol-
ler.
X Select th elocation.
If available, th epostcod eisshown. If there
are differen tpostcodes availabl efor th eloca-
tion, th ecorrespondin gdigitsare displayed
with an X
X.
X Ente rthe street and house number.
The address is in th emenu.
Further options for destination entry:
R search for akeyword
The keyword search finds destination susing
fragment sofwords.
R selec tthe last destination
R selec tacontact
R selec taPOI
You can search for aPOI by location, nam eor
telephone number.
R selec tadestination on th emap
R enter an intermediat edestination
You can map th erout etot hedestination
yourself with up to four intermediat edestina-
tions.
R selec tatravel guide destination (only availa-
ble for selecte dEuropean countries)
R selec tdestination sfromM ercedes-Benz
Apps
R selec tgeo-coordinates Calculating th
eroute Prerequisite: th
eaddress has been entered and
is in th emenu.
X Select Start
StartorContinue
Continue.
The rout eiscalculate dwith th eselecte droute
type and th eselecte drout eoptions.
If rout eguidance has alread ybeen activated,
ap rompt will appear asking whether you wish
to end th ecurren trout eguidance.
X Select Yes
YesorSet as intermediate des‐
Set as intermediate des‐
tination
tination.
Yes Yes cancel sthe curren trout eguidance and
start srout ecalculation to th enew destina-
tion.
Set as intermediate destination Set as intermediate destination adds
th en ew destination in addition to th eexisting
destination and open sthe intermediat edes-
tinations list. Connecting th
emobile phone
Requirements For telephony via th
eBluetooth ®
interface, you
require aBluetooth ®
-capable mobile phone. The
mobile phon emust support Hands-Free Profile
1. 0ora bove.
Multimedia system:
X Select Vehicle
VehicleQSy stem set‐
System set‐
tings
tingsQ Activate Bluetooth
Activate Bluetooth .
X Activate Bluetooth ®
O.
Mobil ephone:
X Activate Bluetooth ®
and, if necessary, Blue-
tooth ®
visibilit yfor other devices (see the
manufacturer' soperatin ginstructions).
The Bluetooth ®
device names for all of on eman-
ufacturer' sproduct smightbei dentical. To
mak eitp ossible to clearly identif yyour mobile
phone, chang ethe device nam e(see th eman-
ufacturer' soperatin ginstructions).
If th emobile phon esupport sthe PBA P(Phone
Book Access Profile) and MA P(Message
Acc ess Profile) Bluetooth ®
profiles ,the follow-
ing informatio nwill be transmitte dafter you
connect:
R phon ebook
R call lists
R messages 302
Operating systemMultimedia system

i
Furthe
rinformation on suitabl emobile
phones can be obtained on the Internet at:
http://www.mercedes-benz.com/
connect
Searching for and authorisin gamobile
phone Befor
eusing your mobile phone with the multi-
media system for the firs ttime, yo uwilln eed to
search for the phone and then authorise (con-
nect) it. Depending on the mobile phone, author- isation takes place by means of Secure Simple
Pairing or by entering apasskey .The multimedia
system automaticall ymake sthe procedure that
is relevant for your mobile phone available. The
mobile phone is always connected automati-
cally afte rauthorisation. Furthe rinformation on
using amobile phone with the multimedia sys-
tem (se ethe Digital Owner's Manual).
If the multimedia system doe snot detect your
mobile phone, this may be du etoparticular
security setting sonyourm obile phone (se ethe
manufacturer's operating instructions).
Only one mobile phone can be connected to the
multimedia system at any one time.
Searching for amobile phone
Audio 20:
X Select Tel/
Tel/ ®QConnect Connect
device deviceQSe archfor phones
Search for phonesQSt art
Start
search
search.
The available mobile phones are displayed.
COMAND Online:
X Select Telephone TelephoneQConnect Connect
device
deviceQSe archfor phones
Search for phonesQSt art
Start
search
search.
The available mobile phones are displayed.
Symbols in the device list Sym-
bol Explanation
Ï
New mobile phone found, not yet
authorised. Ñ
Mobil
ephone is authorised ,but is
not connected. #
Mobil
ephone is authorised and
connected. Connecting the mobile phone Authorisation using Secure Simple Pairing:
X Select the mobile phone.
Ac ode is displaye dinthe multimedia system
and on the mobile phone.
X If the codes match: selectYes Yeson the mul-
timedia system.
X Confirm the code on the mobile phone.
Depending on the mobile phone used, con-
firm the connectio ntothe multimedia system
and for the PBAP and MAP Bluetooth ®
pro-
files. The prompt to confir mmay take up to
two minutes to be displaye d(seet he manu-
facturer's operating instructions).
X If the codes are different: selectNo
No on the
multimedia system.
The process is cancelled.
Repea tauthorisation.
Authorisation by entering apasskey:
X Select the Bluetooth ®
name of the mobile
phone.
The inpu tmenu for the passkey is displayed.
X Choose aone- to sixteen-digit number com-
bination as apasskey.
X Enter the passkey on the multimedia system.
X Press ¬to confirm.
X Enter and confir mthe passkey on the mobile
phone. Depending on the mobile phone used,
confir mthe connectio ntothe multimedia sys-
tem and for the PBAP and MAP Bluetooth ®
profiles. The prompt to confir mmay take up
to two minutes to be displaye d(seet he man-
ufacturer's operating instructions).
i Mobil
ephones that are connected to the
optionally available telephone module with
Bluetooth ®
(SAP profile) are displaye dsepa-
rately in the device list. These are found below
the entry MB SAP module phones MB SAP module phones.
Switchin gbetween mobile phones If yo
uhavea uthorised more than one mobile
phone, yo ucan switch between the individual
phones.
Multimedia system:
X Select Connect device Connect device.
X Select amobile phone from the device list. Operating system
303Multimedia system Z

Telephon
emodule with Bluetooth ®
(SAP profile)
Introduction The modul
ecan be used as apermanentl yinstal-
le dt elephon ewithi ts ow nSIM card
(Y page 305 )orinconjunctio nwitham obile
phone (Y page 305).
If yo uwishtou sethe modul einconjunctio nwith
your mobil etelephone, the mobil ephone must
support the Bluetooth ®
SAP profil e(SIM Access
Profile).
The following functions ar eavailable using the
module:
R data modem mod e(Ypage 306)
R sending and receiving text messages
(Y page 306)
R accessing the phone book of the mobile
phone (Y page 306)
R charging amobil ephone via the USB connec-
tio n(Ypage 306)
Al istofc ompatibl emobil ephonesc an be found
at:
http://www.mercedes-benz.com/connect
i The modul
eisnot availabl einallvehicles,
depending on the equipment.
Installing the module Mounting the modul
einthe stowag ecompart-
ment of the centre console
X Slide module ;into bracket :unti lita udi-
bl ye ngages. Connectin
gthe module using aUSB
cabl e(CO MAND Online) Mounting the modul
einthe stowag ecompart-
ment of the centre console
X Insert USB cable :into the module.
X Slide the modul einto the bracket unti litaudi-
bl ye ngages.
X Connect the USB cable to the USB port.
Activatin gand connectin gthe module Audio 20:
X Select Tel/ Tel/® .
COMAND Online:
X Select Telephone Telephone .
X Module: install(Y page 304).
X Press and hol dbutton ;.
X As soo nasindicator lamp :starts flashing
yellow ,release the button.
The indicator lamp continue stoflash yellow. 304
Operatin
gsystemMultimedia system

Multimedia system:
X Select Connect device
Connect deviceQConnect MB Connect MB
SAP module
SAP moduleQStart search Start search.
The module is searched for and connected.
X To authorise amobile phone: selectStart
Start
search
search and follow the instructions of the mul-
timedia system. Further information on
authorising and connecting mobile phones
(Y page 303).
SIM card mode Inserting
aSIM card X
With the contact surface facing down, insert
SIM card :into the SIM card slot until it
engages.
After aSIM card is inserted in the module, a
Bluetooth ®
connection with another mobile
phone is no longer possible. Any existing
Bluetooth ®
connection is ended upon SIM
card insertion.
Connecting the mobile phone to the
telephone module General notes
Before using your mobile phone with the module
and the multimedia system for the first time, you will need to search for the phone and then
authorise it. Requirements
The mobile phone can be authorised and con-
nected to the module if:
R the module is installed (Y page 304) and acti-
vated in the multimedia system
(Y page 304)
R no SIM card is inserted in the module
R the mobile phone has no active Bluetooth ®
connection to another device
Depending on the type of mobile phone, differ-
ent settings must be changed on the mobile
phone (see the manufacturer's operating
instructions).
R Bluetooth ®
must be activated on the mobile
phone and must be made visible to other devi- ces
R the Bluetooth ®
SIM Access Profile of the
mobile phone must be activated
Authorising and connecting amobile
phone
Multimedia system:
X Select Connect device
Connect deviceQSearch for Search for
phones phonesQSAP phone SAP phoneQStart Start
search
searchQMB SAP module phones MB SAP module phones.
X Select the mobile phone.
X Enter and confirm any 16-digit PIN.
X Enter and confirm the same PIN on the mobile
phone.
X Where necessary, enter the SIM card PIN into
the multimedia system and confirm.
i Please observe the messages in the mobile
phone. If necessary, you will be asked to con-
firm further profile requests.
Switching between mobile phones If you have authorised more than one mobile
phone on the module, you can switch between
the individual phones.
X Select the mobile phone under MB MBSAP
SAP mod‐
mod‐
ule phones
ule phones.
X Confirm the connection request (see the man-
ufacturer's operating instructions).
X Where necessary, enter the SIM card PIN into
the multimedia system and confirm. Operating system
305Multimedia system Z

Dat
am odem mode X
Connect th emobile phone to th emodule
(Y page 305).
or
X Inser tthe SIMc ardi ntot he SIMc ards loton
th em odule (Y page 305).
X Before connecting fo rthe first time, enable
th em odule fo rInterne taccess and selec tthe
networ kprovider in th emultimedia system
(se ethe manufacturer's operatin ginstruc-
tions).
Use as adatam odem is automatically activa-
ted.
X Activate/deactivat edatar oamin g(seet he
manufacturer's operatin ginstructions).
Fo rfurther information on dat amodew ithout
telephon ywithC OMAN DOnlin e( seet he man-
ufacturer's operatin ginstructions).
Settings Storing/deleting th
eSIM car dPIN
Multimedia system:
X Select Connect Connect device
deviceQMBMBSAP
SAP module
module
phones
phones .
X Highlight th emobile phone.
X To select G:navigatetotheright.
X Activate Oor deactivate ªStore PINStore PIN .
Transferring th ephone book In order to use th
ephone boo kofthemobile
phone via th emultimedia system, th ephone
boo kmustbet ransferred usin gthe module.
The dat atransfe rmay take up to te nminutes.
Transmissio noccursa utomatically after aBlue-
tooth ®
connection is automatically established.
Text messages Requirements
The module is connecte dwitht he mobile phone
(Y page 305) or is bein gused in th eSIMcard
mode (Y page 305). Activating/deactivating text message
downloading from th emobile phone Dial number Function
00080 Tex
tmessag edown-
loadin gisdeactiva-
ted. 00081 Tex
tmessag edown-
loadin gisactivated. Fo
rfurther information on receivin gtextm es-
sages when usin gthe telephon emodule (see
th em anufacturer's operatin ginstructions).
Charging amobile phone X
Slide cover ;on th emodule in th edirection
of th earrow and remov eit.
X Connect th emobile phone wit haUSBdata
cable to US Bsocket :. Media mode
General notes If you wish to play external media sources, the
default display mus
talready be turned on .Fur-
ther information on media mode (se ethe Digital
Owner' sManual).
The followin gexternal media source scan be
used:
R Apple ®
devices (e.g. iPhone ®
)
R US Bd evices (e.g. US Bstick ,MP3 player)
R CD
R DV D(COMAN DOnline)
R SD memor ycards
R via devices connecte dbyBluetooth ® 306
Operating systemMultimedi
asystem