2015 MAZDA MODEL CX-5 Quick Guide (in English)

When Driving
16
Switch
Switch
OFF switch
RES switch
Cruise control
SET+/SET- switch CANCEL switch
ON switch
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Speed When the ON switch is pressed, the vehicle speed and the distance between
vehicles while in headway control can be set. The Mazda Radar Cruise Control
(MRCC) indication is displayed in the display of the instrument cluster.
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET + or SET - switch is pressed. The set
speed and the inter-vehicle distance display filled with white lines are displayed.
Travel statusDuring travel at constant
speedDuring travel under headway
control
Display
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
17For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Distance Between Vehicles During Headway Control
The distance between vehicles is set to a shorter distance each time the switch is
pressed. The distance between vehicles is set to a longer distance by pressing the
switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short,
and extremely short distance.
Distance-between-
vehicles guideline
(at 80 km/h (50 mph)
vehicle speed)
Indication on
displayLong
(about 50 m
(164 ft))Medium
(about 40 m
(131 ft))Short
(about 30 m
(98 ft))Extremely
short
(about 25 m
(82 ft))
Change the Set Vehicle Speed
Changing the set vehicle speed using the SET + / SET - switch
Press and hold the SET + or SET - switch to adjust the set vehicle speed in 10 km/h
(5 mph) increments.
The set vehicle speed can also be adjusted in 1 km/h (1 mph) (European models)
or 5 km/h (5 mph) (Except European models) increments by pressing and
releasing the SET + or SET - switch immediately.
To accelerate using the accelerator pedal
Depress the accelerator pedal and press and release the SET + or SET - switch at
the desired speed. If a switch cannot be operated, the system returns to the set
speed when you release your foot from the accelerator pedal.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle applies the brakes suddenly while you
are travelling in headway control, the warning sound
activates and the brake warning is indicated in the display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safe distance from
the vehicle ahead. Additionally, always keep a safer
distance from the vehicles behind you.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

18
When Driving
"Late" function "Early" function
Lane-keep Assist System
The lane-keep assist system alerts the driver that the vehicle is not being kept
within its lane and it provides steering assistance to help the driver stay within the
vehicle lane.
For details, refer to Section 4, “Lane-keep Assist System”.
The steering wheel operation of the lane-keep assist system has “Late” and
“Early” steering assist timing functions and the setting can be changed. Details
are described in Setting Change (Personalisation Features) in the related text.
Do not rely completely on the lane-keep assist system:
Other details are described in the related text.
WARNING
• The lane-keep assist system is not an automatic driving system.
• The detection ability of the lane-keep assist system is limited. Always stay
on course using the steering wheel and drive with care.
NOTE
The lane-keep assist system may not operate as expected depending on how
well the system can detect the white (yellow) lane lines or the road conditions,
however this does not mean there is a problem with the system.
Other details are described in the related text.
To turn on the system
1. Press the lane-keep assist system switch. The lane-keep assist system indication
(stand-by) becomes visible in the multi-information display.
NOTE
If the steering operation assist setting has been turned off, the lane-keep assist
system indication (stand-by) is not indicated.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
19For details, refer to Section 4, “Lane-keep Assist System”.
Lane-keep Assist System
2. Drive the vehicle in the centre of the vehicle lane while the system is on standby.
3. The system becomes operational when all of the following conditions are met.
Other conditions are described in the related text.
• The vehicle speed is about 60 km/h or faster.
• The system detects white (yellow) lane lines.
• If the system can only detect a white (yellow) lane line on either the left or
right, the system will not operate if the vehicle crosses the lane line on the side
that cannot be detected, and a warning will not be activated. The system will
only operate if the vehicle crosses a lane line on the side that can be detected
and it will only activate the warning in this instance.
• If you take your hands off the steering wheel (not holding the steering wheel),
the warning sound is activated and an alert is indicated in the multi-information
display.
Vehicle lane line display
When the lane-keep assist system goes from stand-by to operational, the vehicle
lane lines are indicated in the lane-keep assist display, and only the colour of the
lane line on the side being detected changes.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

20
When Driving
For details, refer to Section 4, “Smart City Brake Support [Forward] (SCBS
F)”, “Smart City Brake Support [Reverse] (SCBS R)”.
Smart City Brake Support [Forward] (SCBS F)/Smart City Brake Support [Reverse] (SCBS R)
The Smart City Brake Support [Forward] (SCBS F) is a system designed to reduce
damage in the event of a collision by operating the brake control when the system’s
laser sensor (front) detects a vehicle ahead and the system determines that a
collision is unavoidable. The system operates while the vehicle is moving in the
forward direction in the speed range of 4 to 30 km/h (3 to 18 mph), reducing
damage in the event of a collision.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle in front of you is less than about 20 km/h (12 mph).
Smart City Brake Support [Forward] (SCBS F)
The Smart City Brake Support [Reverse] (SCBS R) is a system designed to reduce
damage in the event of a collision by operating the brake control when the system’s
ultrasonic sensors detect a vehicle or a wall at the rear of the vehicle and the system
determines that a collision is unavoidable.
The system operates while the vehicle is reversing in the speed range of 2 to 8 km/h
(2 to 4 mph), reducing damage in the event of a collision.
Smart City Brake Support [Reverse] (SCBS R)
Do not rely completely on the system:
• (Smart City Brake Support [Forward] (SCBS F))
If the vehicle height or inclination is changed, the system will not be able to
correctly detect vehicles ahead. This will result in the Smart City Brake
Support (SCBS) system not operating normally or mistakenly operating,
which could cause a serious accident.
WARNING
Do not modify the suspension: • (Smart City Brake Support [Reverse] (SCBS R))The Smart City Brake Support [Forward] (SCBS F) operates in response to
a vehicle (4-wheeled vehicle) in front of your vehicle. Operation in
response to 2-wheeled vehicles or pedestrians is not guaranteed.
The Smart City Brake Support [Reverse] (SCBS R) operates in response to
a vehicle (4-wheeled vehicle) behind of your vehicle or a wall. Operation in
response to 2-wheeled vehicles or pedestrians is not guaranteed.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
1219
NOTE
• (Smart City Brake Support [Forward] (SCBS F))
• Trucks with low loading platforms and vehicles with an extremely low or
high profile.
Smart City Brake Support [Forward] (SCBS F)/Smart City Brake Support [Reverse] (SCBS R)
The Smart City Brake Support [Forward] (SCBS F) detects a vehicle ahead
by emitting a near-infrared laser beam and receiving the beam reflected off
the reflector of the vehicle ahead, and then using it for the measurement.
Consequently, the Smart City Brake Support [Forward] (SCBS F) may not
operate under the following conditions:
•
Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used
when it's raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is
accelerated rapidly and comes close to the vehicle ahead.
• (Smart City Brake Support [Reverse] (SCBS R))
• The obstruction is small.
The Smart City Brake Support [Reverse] (SCBS R) operates using ultrasonic
sensors (rear) which detect obstructions at the rear by emitting ultrasonic
waves and then receiving the returning waves reflected off the obstructions.
•
The obstruction is thin such as a signpost.
• The obstruction is soft such as a hanging curtain or snow stuck to a vehicle.
• The obstruction is shaped irregularly.
• The surface of the obstruction is not pointed vertically relative to the vehicle.
In the following cases, the ultrasonic sensors (rear) cannot detect obstructions
and the Smart City Brake Support [Reverse] (SCBS R) may not operate.
•
The obstruction is positioned away from the centre of the vehicle.
• Something is stuck on the bumper near an ultrasonic sensor (rear).
• When travelling near objects such as foliage, barriers, vehicles, walls, and
fences along a road.
• When driving off-road in areas where there is grass and forage.
Other details are described in the related text.
For details, refer to Section 4, “Smart City Brake Support [Forward] (SCBS
F)”, “Smart City Brake Support [Reverse] (SCBS R)”.
Other details are described in the related text.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

22
When Driving
Smart Brake Support (SBS)
Smart Brake Support (SBS) is a system which alerts the driver of a possible
collision using an indicator and warning sound in the instrument cluster while the
vehicle is being driven at about 15 km/h or faster (10 mph or faster) and the
system's radar sensor determines that your vehicle may hit a vehicle ahead.
Furthermore, if the radar sensor determines that a collision is unavoidable, the
automatic brake control is performed to reduce damage in the event of a collision.
For details, refer to Section 4, “Smart Brake Support (SBS)”.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
The Smart Brake Support (SBS) system is only designed to reduce damage in the
event of a collision. The ability to detect obstructions is limited depending on the
obstruction, weather conditions, or traffic conditions.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
23For details, refer to Section 4, “Smart Brake Support (SBS)”.
Smart Brake Support (SBS)
NOTE
The Smart Brake Support (SBS) system may not operate under the followingy
conditions:
• If there is the possibility of hitting only a part of a vehicle ahead.
Although the objects which activate the system are 4-wheeled vehicles, the radar
sensor could detect the following objects, determine them to be an obstruction,
and operate the Smart Brake Support (SBS) system.
• Objects on the road at the entrance to a curve (including guardrails and
snow banks).
If there is the possibility of a collision with a vehicle or
obstruction ahead, the beep sounds continuously and a
warning is indicated in the display.
Collision Warning
Other details are described in the related text.
Other details are described in the related text.
• The vehicle is driven at the same speed as the vehicle ahead.
• The brake pedal, steering wheel, selector lever, or a direction indicator is
operated.
• A vehicle appears in the opposite lane while cornering or rounding a curve.
• When crossing a narrow bridge, passing through a low gate or tunnel, a
narrow gate, or entering an underground parking area.
• Metal objects, bumps, or protruding objects on the road.
• Two-wheeled vehicles such as motorcycles and bicycles, pedestrians, trees.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD