2015 MAZDA MODEL CX-5 Personalization settings

Black plate (89,1)
NOTElFunction number 3 is the factory setting for
your vehicle.
lThere are only a total of five auto lock/
unlock settings available for automatic
transaxle vehicles, and three for manual
transaxle vehicles. Be sure to press the
unlock side of the driver's door-lock switch
the correct number of times according to
the selected function number. If the switch
is mistakenly pressed six times on an
automatic transaxle vehicle or four times
on a manual transaxle, the procedure will
be invalidated. If this occurs, start the
procedure from the beginning.
Functionnumber Function*1
1
The auto door-lock function is
disabled.
2 All the doors and the liftgate lock
automatically when the vehicle speed
is about 20 km/h (12 mph) or more.
3 All the doors and the liftgate lock
automatically when the vehicle speed
is about 20 km/h (12 mph) or more.
All the doors and the liftgate unlock
when the ignition is switched from ON
to Off.
4 (Automatic transaxle vehicles only)
When the ignition is switched ON and
the shift lever is shifted from park (P)
to any other gear position, all the
doors and the liftgate lock
automatically.
5 (Automatic transaxle vehicles only)
When the ignition is switched ON and
the shift lever is shifted from park (P)
to any other gear position, all the
doors and the liftgate lock
automatically.
When the shift lever is shifted to park
(P) while the ignition is switched ON,
all the doors and the liftgate unlock
automatically.
*1 Other settings for the auto door lock function are available at an Authorized Mazda Dealer. For
details consult an Authorized Mazda Dealer.
Refer to Personalization Features on page 9-10.
1. Safely park the vehicle. All doors mustremain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the driver's door-lock switch within 20
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.
4. Referring to the auto lock/unlock function setting table and determine the
function number for the desired setting.
Press the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(Ex. If you select function 2, press the
unlock side of the switch only 2 times).
5. Three seconds after the function setting has been changed, a beep sound will
beep in the amount of the selected
function number. (Ex. Function
number 3 = 3 beep sounds)
Before Driving
Doors and Locks
3-15
CX-5_8DR2-EA-14A_Edition1 Page89
Thursday, November 21 2013 8:48 AM
Form No.8DR2-EA-14A

Black plate (520,1)
Personalization Features
The following personalization feature is available. This setting can only be changed by an Authorized Mazda.
Items in which the feature setting can be changed differ depending on the market and specification.Item Feature Factory Setting Available Settings
Daytime running
lights The function of the daytime running lights can
be changed.
On On/Off
9-10
Personalization Features
CX-5_8DR2-EA-14A_Edition1 Page520
Thursday, November 21 2013 8:50 AM
Form No.8DR2-EA-14A

Black plate (521,1)
The following personalization features can be changed by the vehicle owner.
Items in which the feature setting can be changed differ depending on the market and specification.Item Feature Factory Setting Available Settings
Power door lock Changes the auto lock/unlock function setting for all
the doors according to the vehicle speed, the vehicle
power supply condition, and the selector lever
position.
Refer to Auto Lock/Unlock Function on page 3-14.
Refer to Setup on page 5-55. Lock: Driving,
Unlock: IGN Off Off/Lock When
Driving/Lock: Shift From P, Unlock: In P/Lock When
Shifting Out Of P
Keyless entry
system The method for unlocking the doors using the
transmitter can be changed.
Refer to Transmitter on page 3-4.
Refer to Setup on page 5-55.
Once: Driver's,
Twice: All Doors Touch Once: All
Doors
The time required for the doors to relock
automatically after unlocking with the transmitter can
be changed.
Refer to Setup on page 5-55. 60 seconds
30 seconds/90
seconds
Advanced keyless
entry system The volume of the answer-back beep during advanced
keyless entry system operation can be changed.
Refer to Locking, Unlocking with Request Switch
(With the advanced keyless function) on page 3-11.
Refer to Setup on page 5-55.
Medium Off/Low/High
The function to automatically lock the doors when
leaving the vehicle while carrying the key can be
changed.
Refer to Setup on page 5-55. Off
On
The method for unlocking the doors using the request
switch can be changed.
Refer to Locking, Unlocking with Request Switch
(With the advanced keyless function) on page 3-11.
Refer to Setup on page 5-55. Once: Driver's,
Twice: All Doors Touch Once: All
Doors
The time required for the doors to relock
automatically after unlocking with the transmitter can
be changed.
Refer to Setup on page 5-55. 60 seconds
30 seconds/90
seconds
Illumination entry The time required for the interior lamp to turn off
automatically can be changed
(prevents battery depletion when a door is open/ajar).
Refer to Setup on page 5-55.
30 minutes
60 minutes/10
minutes
The time required for the interior lamp to turn off
automatically after all doors are closed can be
changed.
Refer to Setup on page 5-55. 15 seconds
7.5 seconds/30
seconds/60 seconds
Three-flash turn
signal The three-flash turn function can be changed.
Refer to Setup on page 5-55.
On
Off
Auto-wiper control The auto-wiper control function can be changed.
Refer to Setup on page 5-55. On
(Rain Sensing) Off (Intermittent)
Personalization Features
9-11
CX-5_8DR2-EA-14A_Edition1 Page521
Thursday, November 21 2013 8:50 AM
Form No.8DR2-EA-14A

Black plate (522,1)
ItemFeatureFactory Setting Available Settings
Auto headlight
off
*1The time required for headlights to turn off after
ignition is switched off can be changed.
Refer to Setup on page 5-55. 30 seconds0 seconds*2/
60 seconds/
90 seconds/
120 seconds
Auto-light control The headlight illumination on/off timing based on
surrounding lightness/darkness can be changed.
Refer to Setup on page 5-55. MediumLight/Medium
Light/Medium
Dark/Dark
Turn indicator The turn indicator beep volume level can be changed.
Refer to Trip Computer and INFO Switch on page
4-18. High Low
Lights-on
reminder
*3
The volume of the lights-on reminder warning alarm
can be changed.
Refer to Trip Computer and INFO Switch on page
4-18. Off High/Low
Blind Spot
Monitoring (BSM)
system The volume of the BSM warning beep can be
changed.
Refer to Trip Computer and INFO Switch on page
4-18.
High Low/OFF
Multi-information
display operation
sound The operation sound volume for the following
operations can be changed.
lTrip computer data clearing
The INFO switch is pressed for 1.5 seconds or
longer while the average fuel economy or average
vehicle speed is displayed.
lNumerical value scroll
The Up/Down switch is pressed for 1.5 seconds or
longer, such as while the maintenance monitor
period setting screen is displayed.
Refer to Trip Computer and INFO Switch on page
4-18. High Low/OFF
9-12
Personalization Features
CX-5_8DR2-EA-14A_Edition1 Page522
Thursday, November 21 2013 8:50 AM
Form No.8DR2-EA-14A

Black plate (523,1)
ItemFeatureFactory Setting Available Settings
Meter display The distance unit can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.
miles or km km or miles
The display language can be changed.
Refer to Trip Computer and INFO Switch on page
4-18. English, French,
or Spanish
English/French/Spanish
The temperature unit can be changed.
Refer to Trip Computer and INFO Switch on page
4-18. °F or °C °C or °F
Smart City Brake
Support (SCBS) The system can be changed so that Smart City Brake
Support (SCBS) does not operate.
*4
Refer to Trip Computer and INFO Switch on page
4-18.
ON OFF
*1 If the setting is changed to 0 seconds, the following operation is performed according to the headlight switch position:
lAtposition: Headlights turn off immediately after the ignition is switched off.lAt any position other than: Headlights do not turn off after the ignition is switched off.
*2 When set to 0 seconds, the lights-on reminder is operable.
*3 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to 0 seconds.
Refer to Lights-On Reminder on page 7-32.
*4 Though these systems can be turned OFF, doing so will defeat the purpose of the system and Mazda recommends that these systems remain ON.
Personalization Features
9-13
CX-5_8DR2-EA-14A_Edition1 Page523
Thursday, November 21 2013 8:50 AM
Form No.8DR2-EA-14A