2015 MAZDA MODEL CX-3 display

When Driving
8
Active Driving Display
Adjust the brightness or the display position while paying attention to safe
driving:
If you do not pay attention to your driving while trying to make the adjustments, it
could lead to an unexpected accident.
WARNING
For details, refer to Section 4, “Instrument Cluster and Display”.
Active driving display
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
9For details, refer to Section 4, “Instrument Cluster and Display”.
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
5
6
7
8
9ABS Warning Light Master Warning Light
Charging System Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)/ Low Engine Coolant
Temperature Indicator Light (Blue)
i-stop Warning Light (Amber) /
Indicator Light (Green)
Automatic Transaxle Warning Light
10
Power Steering Malfunction Indicator Light
19
2124
26
27High Beam Control System (HBC)
Warning Light (Amber) /Indicator
Light (Green) Signal Warning/Indicator Lights
Brake System Warning Light
20KEY Warning Light (Red) /Indicator
Light (Green)
Lane Departure Warning System
(LDWS) Warning Light Smart Brake Support/Smart City
Brake Support (SBS/SCBS) Warning
Light (Amber)/Indicator Light (Red)23
Blind Spot Monitoring (BSM)
OFF Indicator Light LED Headlight Warning Light
Lane Departure Warning System
(LDWS) OFF Indicator Light
17
11
12
13Air Bag/Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
15Seat Belt Warning Light (Front seat)
Door-Ajar Warning Light
Seat Belt Warning Light (Red) /
Indicator Light (Green) (Rear seat)
14
Low Washer Fluid Level Warning Light18
Tyre Pressure Monitoring System
Warning Light
Glow Indicator Light28
34
35
36
37Smart Brake Support/Smart City
Brake Support (SBS/SCBS) OFF
Indicator Light
i-ELOOP Warning Light
(Amber)/Indicator Light (Green)
Shift Position Indication
38
39
41
42
Headlight High-Beam Indicator Light
Direction Indicator/Hazard Warning
Indicator Lights
Security Indicator Light
Cruise Main Indicator Light (Amber) /
Cruise Set Indicator Light (Green)
Front Fog Light Indicator Light
Wrench Indicator Light30
31
32
33TCS/DSC Indicator Light
TCS OFF Indicator Light
Lights-On Indicator Light
43
Select Mode Indicator Light
Diesel Particulate Filter Indicator Light29
Adjustable Speed Limiter Main Indicator
Light(Amber)/ Adjustable Speed Limiter
Set Indicator Light (Green)
44 40Rear Fog Light Indicator Light
120 km/h Warning Light
16
4WD Warning Light
22
25Mazda Radar Cruise Control (MRCC)
Warning Light (Amber)/Indicator
Light (Green)
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







13
When Driving
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) system
The Mazda Radar Cruise Control (MRCC) system is designed to maintain
headway control according to the vehicle speed using a radar sensor to detect the
distance to a vehicle ahead, which frees the driver from having to use the
accelerator or brake pedals.
Additionally, if your vehicle starts closing in on the vehicle ahead because, for
example, the vehicle ahead brakes suddenly, a warning sound and a warning
indication in the display are activated simultaneously to alert you to maintain a
sufficient distance between the vehicles.
Use the Mazda Radar Cruise Control (MRCC) system on expressways and other
highways which do not require a lot of repeated acceleration and deceleration. The possible vehicle speed setting ranges are as follows:
Do not rely completely on the Mazda Radar Cruise Control (MRCC) system
and always drive carefully:
The Mazda Radar Cruise Control (MRCC) system has limitations in its ability to
detect vehicles ahead depending on the weather and road conditions.
Additionally, the system may be unable to decelerate sufficiently to avoid
hitting the vehicle ahead if the vehicle ahead applies the brakes suddenly or
another vehicle cuts into the driving lane, which could result in an accident.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
Do not use the Mazda Radar Cruise Control (MRCC) system in the
following locations. Otherwise, it could lead to an accident:
• Roads with sharp curves, heavy traffic, or roads requiring repeated and
frequent acceleration.
• When entering expressway interchanges and service areas.
• Slippery roads such as ice or snow-bound roads.
• Long descending slopes.
• (European models)
About 30 km/h (19 mph) to 200 km/h (124 mph)
• (Except European models)
About 30 km/h (19 mph) to 145 km/h (90 mph)
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







14
When Driving
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) Display IndicationSetting the Mazda Radar Cruise Control (MRCC)
The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain,
fog, snow or other inclement weather conditions, or when the front surface of the
radiator grille is dirty.
NOTE
Under the following conditions, operation of the Mazda Radar Cruise Control
(MRCC) system is temporarily cancelled. The Mazda Radar Cruise Control
(MRCC) indicator light (green) turns off simultaneously.
• The CANCEL switch is pressed or the brake pedal is depressed.
The setting status of the Mazda Radar Cruise Control (MRCC) system is indicated
in the display in the instrument cluster.
A system malfunction or operation conditions are indicated by a warning.
• The parking brake is applied.
• The shift lever is in the P, N, or R position (for manual transaxle vehicles,
R position only).
• The vehicle speed decreases to less than 25 km (16mph).
• The DSC, Smart Brake Support (SBS) system, or the Smart City Brake
Support (SCBS) system is operating.
• A system malfunction is detected.
Other details are described in the related text.
Vehicle ahead display
MRCC Distance between vehicle displayMRCC Set
vehicle speed
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
15
ON/OFF switch
OFF switchON switchWith Adjustable Speed Limiter
CANCEL switch CANCEL switch
Switch Switch
Switch
Switch
SET+/SET- switch SET+/SET- switch
Without Adjustable Speed Limiter
RESUME
switch RESUME
switch
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Speed When the ON switch is pressed, the vehicle speed and the distance between
vehicles while in headway control can be set. The Mazda Radar Cruise Control
(MRCC) indication is shown in the display of the instrument cluster.
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET + or SET - switch is pressed. The set
speed and the inter-vehicle distance display filled with white lines are displayed.
Travel statusDuring travel at constant
speedDuring travel under headway
control
Display
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
1616For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Distance Between Vehicles During Headway Control
The distance between vehicles is set to a shorter distance each time the switch is
pressed. The distance between vehicles is set to a longer distance by pressing the
switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short,
and extremely short distance.
Distance-between-
vehicles guideline
(at 80 km/h (50 mph)
vehicle speed)
Indication on
displayLong
(about 50 m
(164 ft))Medium
(about 40 m
(131 ft))Short
(about 30 m
(98 ft))Extremely
short
(about 25 m
(82 ft))
Change the Set Vehicle Speed
Changing the set vehicle speed using the SET + / SET - switch
Press and hold the SET + or SET - switch to adjust the set vehicle speed in 10 km/h
(5 mph) increments.
The set vehicle speed can also be adjusted in 1 km/h (1 mph) (European models)
or 5 km/h (5 mph) (Except European models) increments by pressing and
releasing the SET + or SET - switch immediately.
To accelerate using the accelerator pedal
Depress the accelerator pedal and press and release the SET + or SET - switch at
the desired speed. If a switch cannot be operated, the system returns to the set
speed when you release your foot from the accelerator pedal.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle applies the brakes suddenly while you
are travelling in headway control, the warning sound
activates and the brake warning is indicated in the display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safer distance from
the vehicle ahead. Additionally, always keep a safer
distance from the vehicles behind you.
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
19For details, refer to Section 4, “Smart Brake Support (SBS)”.
Smart Brake Support (SBS)
NOTE
The Smart Brake Support (SBS) system may not operate under the followingy
conditions:
• If there is the possibility of hitting only a part of a vehicle ahead.
Although the objects which activate the system are four-wheeled vehicles, the
radar sensor could detect the following objects, determine them to be an
obstruction, and operate the Smart Brake Support (SBS) system.
• Objects on the road at the entrance to a curve (including guardrails and
snow banks).
If there is the possibility of a collision with a vehicle or
obstruction ahead, the beep sounds continuously and a
warning is indicated in the display.
Collision Warning
Other details are described in the related text.
Other details are described in the related text.
• The vehicle is driven at the same speed as the vehicle ahead.
• The brake pedal, steering wheel, selector lever, or a direction indicator is
operated.
• A vehicle appears in the opposite lane while cornering or rounding a curve.
• When crossing a narrow bridge, passing through a low gate or tunnel, a
narrow gate, or entering an underground parking area.
• Metal objects, bumps, or protruding objects on the road.
• Two-wheeled vehicles such as motorcycles and bicycles, pedestrians, trees.
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
21
Variable
voltage
alternator
CapacitorDC-DC converter
For details, refer to Section 4, “i-ELOOP”.
The i-ELOOP power generating status is displayed in the audio display.
Indication on display
Control Status Display
Control status
Displays the level of electricity generated by
regenerative braking.
Displays the amount of the electricity stored
in the rechargeable battery.
Displays the status of the electricity stored
in the rechargeable battery and being
supplied to the electrical devices (whole
vehicle in display is illuminated
simultaneously).
i-ELOOP System
CAUTION
• Variable voltage alternator
High-current electricity flows through the following parts, therefore do not touch
them.
• DC-DC converter
• Capacitor
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC