2015 MAZDA MODEL CX-3 oil level

[x] Cancel search: oil level

Page 182 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) *Some models.4–42
When Driving
Instrument Cluster and Display
 Wrench Indicator Light
  When the ignition is switched ON, the 
wrench indicator light is illuminated and 
then turns off after a few s

Page 484 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–6
Maintenance and Care
Scheduled Maintenance
   *6   If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil fi lter at 
every 10,000 km (6,250

Page 486 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–8
Maintenance and Care
Scheduled Maintenance
    Chart  symbols:
 I:   Inspect: Inspect and clean, repair, adjust, fi ll up, or replace if necessary.
 R:   Replace
 C:   Clean
 T:   Tighten
  Rem

Page 489 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–11
Maintenance and Care
Scheduled Maintenance
   *4   If the vehicle is operated primarily under any of the following conditions, replace the engine oil fi lter at every 
5,000 km or 6 months.

Page 492 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–14
Maintenance and Care
Scheduled Maintenance
   *4   If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil fi lter 
more often than the recom

Page 495 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–17
Maintenance and Care
Owner Maintenance
     Owner  Maintenance  Precautions
            Routine  Service
    We highly recommend that these items be inspected daily, or at least every week.
�

Page 504 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–26
Maintenance and Care
Owner Maintenance
 NOTE
(SKYACTIV-G 2.0)
� �
� ��  It is normal for all engines to consume engine oil under normal driving conditions. �  Engine oil consumption may be

Page 506 of 671

MAZDA MODEL CX-3 2015  Owners Manual (in English) 6–28
Maintenance and Care
Owner Maintenance
 Inspecting Engine Oil Level
             1.   Be  sure  the  vehicle  is  on  a  level 
surface.
   2.   Warm up the engine to normal 
operating temperat
Page:   1-8 9-16 next >