2015 MAZDA MODEL CX-3 set clock

5–65
Interior Features
Audio System
Settings
NOTE
Depending on the grade and specifi cation, the screen display may differ.
Select the
icon on the home screen and display the Settings screen.
Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
Tab Item Function
AD-Disp Height
Brightness Control
Other Refer to Active Driving Display on page 4-34 .
Display Refer to Volume/Display/Sound Controls on page 5-48 .
Safety Distance Recognition Support System
SBS/SCBS
Other Refer to Personalisation Features on page 9-13 .
Sound Refer to Volume/Display/Sound Controls on page 5-48 .
Clock Adjust Time Displays the currently set time is displayed.
Press
to advance the hour/minute, and select to move the hour/minute back.
AM/PM can only be selected with the 12-hour
clock display.
GPS Sync When ON is selected, “Adjust Time” is
disabled.
Time Format Changes the display between 12 and 24-hour
clock time.
Time Zone Select Selects the time zone.
Daylight Savings Time Turns the daylight saving time setting on/off.
When ON, the time advances 1 hour. When
OFF, it returns to normal time.
Vehicle Rain Sensing Wiper
Door Lock
Other Refer to Personalisation Features on page 9-13 .
Devices Bluetooth
® Refer to Bluetooth ® Preparation (Type C/Type
D) on page 5-108 .
Network Management Wi-Fi™ is used to obtain Navi POI/Real Time
Traffi c function (Such as gas prices, weather,
nearest restaurant)
$9@&;&&%@&EJUJPOJOEC







5–101
Interior Features
Bluetooth®
NOTE
  Some Bluetooth ® audio devices need
a certain amount of time before the
“
” symbol is displayed.   If a hands-free type mobile phone has
been the most recently paired device,
the Bluetooth
® unit links this device.
If you would like to use a Bluetooth ®
audio type device which has been
previously paired to the Bluetooth ®
unit, the link must be changed to this
device.
  If an error occurs while trying to link
a device, “ Err ” fl ashes in the display
for three seconds, and the display
returns to “ LINK CHANGE ”. If this
occurs, check the pairing status of
the Bluetooth
® audio device and the
location of the device in the vehicle
(not in the luggage compartment or a
metal-type box), and then try the link
operation again.
  Device selection can also be done
using voice recognition.
How to confi rm the device currently
linked
Switch to the link-change mode. (Refer to
“Changing the link to a Bluetooth
® audio
device”)
The device name displayed fi rst is the
device which is currently linked.
Deleting a device
1. Using the audio control dial, select the
pairing delete mode “ PAIR DELETE ”
in the “ BT SETUP ” mode. (Refer to
“Bluetooth
® audio device set-up” for
details.)
2. Press the audio control dial to
determine the mode. 3. The name of the fi rst device among the
paired devices is displayed.
4. Rotate the audio control dial and select
the name of the paired device you
would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of paired devices can
be displayed. If only one device is
paired, only the name for this device is
displayed.
5. If a selection other than “ GO BACK ”
is made and the audio control dial is
pressed, “ SURE ? NO ” is displayed.
6. Rotate the audio control dial clockwise
and switch the display to “ SURE ?
YES ”.
$9@&;&&%@&EJUJPOJOEC







5–102
Interior Features
Bluetooth®
NOTE
The display changes as follows
depending on whether the audio
control dial is rotated clockwise or
anticlockwise.
-Clockwise: “ SURE ? YES ” displayed
-Anticlockwise: “ SURE ? NO ”
displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select “ GO BACK ” and press the audio
control dial to return to the “ PAIR
DELETE ” display.
8. “ PAIR DELETED ” is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete
the paired device, “ Err ” fl ashes in the
display for three seconds and the display
returns to “ LINK DELETE ”.
Bluetooth
® audio device information
display
1. Using the audio control dial, select the
pair device information display mode
“ DEVICE INFO ” in the “ BT SETUP ”
mode. (Refer to “Bluetooth
® audio
device set-up” for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
® unit device
is displayed. 4. Rotate the audio control dial to select
the information for the Bluetooth
® unit
which you would like to view.
Device name
BT address
NOTE
When “ GO BACK ” is selected and the
audio control dial is pressed, the display
returns to “ DEVICE INFO ”.
Available Language (Type A/Type
B)
The available languages are English,
French, Spanish, Italian, German, Dutch,
and Portuguese. If the language setting
is changed, all of the voice guidance and
voice input commands are done in the
selected language.
$9@&;&&%@&EJUJPOJOEC







7–22
If Trouble Arises
Flat Tyre
4. Turn the wheel brace anticlockwise and
lower the vehicle. Use the wheel brace
to tighten the nuts in the order shown.
If you are unsure of how tight the nuts
should be, have them inspected at an
expert repairer, we recommend an
Authorised Mazda Repairer.
Nut tightening torque
N·m (kgf·m, ft·lbf) 108—147
(12—14, 80—108)
WARNING
Always securely and correctly tighten
the wheel nuts:
Improperly or loosely tightened wheel
nuts are dangerous. The wheel could
wobble or come off. This could result
in loss of vehicle control and cause a
serious accident.
WARNING
Be sure to reinstall the same nuts you
removed or replace them with metric
nuts of the same confi guration:
Because the wheel studs and wheel
nuts on your Mazda have metric
threads, using a non-metric nut is
dangerous. On a metric stud, it would
not secure the wheel and would
damage the stud, which could cause the
wheel to slip off and cause an accident.
5. Remove the tyre blocks and store the
tools and jack.
6. Store the damaged tyre in the luggage
compartment.
7. Check the infl ation pressure. Refer to
Tyres on page 9-9 .
8. Have the fl at tyre repaired or replaced
as soon as possible.
NOTE
(With tyre pressure monitoring
system)
Do not press the tyre pressure
monitoring system set switch after
installing the spare tyre. The switch
is only to be pressed after installing
the repaired fl at tyre or installing a
replacement tyre (page 4-36 ).
$9@&;&&%@&EJUJPOJOEC







10–3
Index
C
Capacities .............................................. 9-7
Carbon Monoxide ............................... 3-27
Cargo Sub-Compartment .................. 5-153
Cell Phones ........................................... 8-4
Child Restraint
Categories of child-restraint
systems .......................................... 2-26
Child-restraint precautions ............ 2-21
Child-restraint system installation ... 2-26
Child-restraint system suitability for
various seat positions table............ 2-31
Installing child-restraint systems... 2-35
Child Safety Locks for Rear Doors ..... 3-19
Clock ................................................... 5-30
Collision warning ................................ 7-54
Coming Home Light System .............. 4-63
Control Status Display ........................ 4-89
Cruise Control ................................... 4-158
Cruise Control Switch ................. 4-158
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light
(Green) ........................................ 4-159
Cruise Control Set Vehicle Speed
Display ................................................ 4-31
Cup Holder ........................................ 5-150
D
Defogger
Mirror ............................................ 4-74
Rear window ................................. 4-73
Diesel Particulate Filter ..................... 4-167
Dimensions ........................................... 9-7
Direct Mode
Automatic transaxle ...................... 4-56
Direction Indicators ............................ 4-67
Distance Recognition Support System
(DRSS) .............................................. 4-118
Indication on display ................... 4-119
Door Locks .......................................... 3-10
Drive selection .................................... 4-93 Driving In Flooded Area ..................... 3-52
Driving Tips
Automatic transaxle ...................... 4-57
Driving in fl ooded area.................. 3-52
Floor mat ....................................... 3-48
Hazardous driving ......................... 3-47
Rocking the vehicle ....................... 3-49
Running-in..................................... 3-46
Saving fuel and protection of the
environment................................... 3-46
Turbocharged vehicles (SKYACTIV-D
1.5) ................................................ 3-53
Winter driving ............................... 3-49
Dynamic Stability Control (DSC) ....... 4-84
TCS/DSC Indicator Light ............. 4-84
E
Effectiveness Display .......................... 4-92
Electronic steering lock warning beep ... 7-54
Emergency Starting
Push-Starting ................................. 7-27
Running Out of Fuel (SKYACTIV-D
1.5) ................................................ 7-28
Starting a Flooded Engine
(SKYACTIV-G 2.0) ...................... 7-27
Emergency Stop Signal System .......... 4-79
Emergency Towing
Towing Description ....................... 7-31
Towing/Tiedown Hooks ................ 7-32
Emission Control System (SKYACTIV-D
1.5) ...................................................... 3-26
Emission Control System (SKYACTIV-G
2.0) ...................................................... 3-25
Ending Display .................................... 4-92
Engine
Bonnet release ............................... 6-19
Coolant .......................................... 6-29
Engine Compartment Overview .... 6-21
Exhaust gas.................................... 3-27
Oil .................................................. 6-23
Starting ............................................ 4-5
Essential information ............................ 6-2
$9@&;&&%@&EJUJPOJOEC