2015 MAZDA MODEL 6 light

25
Blind Spot Monitoring System
BLIND SPOT MONITORING (BSM) (if equipped)
The Blind Spot Monitoring (BSM) system is designed to assist the driver
by monitoring blind spots on both sides of the vehicle to the rear in
certain situations such as when changing lanes on roads and freeways or
reversing the vehicle from a parking garage.
The Blind Spot Monitoring (BSM) System consists of the Blind Spot Moni\
toring
(BSM) and Rear Cross Traffic Alert (RCTA).
Turning BSM System Off
Turning the BSM system off will turn off both the light and sound
indicators. To manually turn the BSM system off, push the BSM
OFF switch on the dash. The BSM OFF indicator will illuminate
in the instrument cluster when the BSM system is off. The BSM
system will automatically turn on the next time the vehicle is started.
•
If y

our vehicle speed is 6.7 mph (10.8 km/h) or more, the BSM will warn
you of vehicles in the detection area by illuminating the BSM warning
lights located on the left and right door mirrors.
•
If y

ou operate a turn signal in the direction of an illuminated BSM warning
light, the system will also warn you with a beep and warning light flash.
•
BS

M sensors are located under the left and right rear bumper areas.
The BSM system may not operate properly if the rear bumper gets too
dirty, so keep the rear bumper area clean.
Your Vehicle
Detection Areas
Please refer to
your Owner’s
Manual for
complete details.
NOTE: Do not rely completely on the BSM system and be sure to look
over your shoulder before changing lanes:
•
Th

e BSM can assist the driver in confirming the safety of the surroundings,
but is not a complete substitute.
•
The

driver is responsible for ensuring safe lane changes and other maneuvers.
•
Al

ways pay attention to the direction in which the vehicle is traveling and the
vehicle’s surroundings.
•
Th

e BSM does not operate when the vehicle speed is lower than about 6.7
mph (10.8 km/h).
1660320_15b_Mazda6_SSG_021714.indd 252/17/14 11:12 AM

28
Automatic Climate Control
NOTE: Automatic climate
control will allow you to
maintain individual preset
cabin temperatures for the
driver and passenger when
DUAL mode is selected.
Driver Temperature
Control Dial
AUTO ON: Push dial
to turn Automatic Air
Conditioning system
on (indicator light on).
Rotate dial to select your
desired set temperature
(shown above). The
airflow mode and the
amount of airflow will be
automatically controlled
in accordance with the
set temperature.
Push to defrost
the windshield.
Push to defrost
the rear window.
Push to
manually turn
air conditioning
on or off.Passenger
Temperature
Control Dial
Push to turn DUAL
mode ON/OFF.
•



W
ith DUAL mode
ON (indicator on),
rotate the dial to
set passenger
side temperature
separate from
the driver’s side
(shown above).
•



With DUAL mode

OFF (indicator off),
driver controls the
temperature setting
on both sides.
Push to select the
following airflow mode:
Push to recirculate
cabin air to reduce
outside odors and
improve cooling.
Push for fresh
air circulation.


Dashboar
d vents
Dashboard



and floor vents
Floor vents


Defr
oster and

floor vents
NOTE: Automatic
temperature control
always works even
if the AUTO indicator
turns off by changing
the fan speed or the
airflow mode.
Fan Control Dial
•



Rotate the dial to
select the desir

ed
fan speed.
•



Push OFF to turn

climate control
system off.
1660320_15b_Mazda6_SSG_021714.indd 282/17/14 11:12 AM

Keyless Entry ..............................1-2
• Advanced Keyless Entry* • Do
or Request Switch*
Starting the Engine
.....................3-4
• Push Button Start System •
Accelerated Warm-Up System (AWS)
• Em

ergency Vehicle Entry/
Engi

ne Start/Stop
Seats ..............................................5
Inf ormation Display ......................6
• Personalization Features*
Driver’s View ...............................7- 8
• Location of Switches and Controls
Instrument Cluster ...................9 -10
• Review of Warning and Indicator
L
ight Function and Location
Lights ............................................11
Wiper/Washer
...............................12
High Beam Control ......................13
Ad aptive Front

Lighting System (AFS)* ...............14
Mazda Radar Cruise Control* ..15 -16
Forward Obstruction Warning* ..16
L ane Departure

Warning System (LDWS) ...............17
Tire Pressure Monitor System ...18
• Initialize TPMS before delivery
Transmission ............................19 -20
Rear View Monitor* ......................21
Customer Deliver y Checklist
Commander Switch* ...................22
i -ELOOP ........................................23
Smart City Brake Support* .........24
Bl ind Spot Monitoring* ................25
Rear Cross Traffic Alert* .............26
Climate Control ........................2 7-2 8
• Manual • Au
tomatic*

Audio Controls .........................29-32
• Bluetooth Audio*
Se t Clock ......................................30

Bluetooth®* ...............................33-34
• Pair Phone • To l
l - F r e e • Ma
ke/Receive Cu stomer Service Ca

ll 800-430-0153
Navigation System* .................35-36
• SD Card •
Pl anning a Route
USB & AUX Input ..........................37
SCHEDULED MAINTENANCE When replacing or topping off engine
oil, use Mazda Genuine oil. For optimal
engine performance, use SAE 0W-20
engine oil. Please consult an Authorized
Mazda Dealer for additional information.
*if equipped
SALES CONSULTANT
DAT ECUSTOMER DAT E
All items in the Customer Deliver y Checklist have been reviewed with the
customer and the first maintenance appointment has been scheduled:
Signed copy must be placed in dealer jacket
VEHICLE PRESENTATION:
Refer to the Smart Start Guide during presentation
1660320_15b_Mazda6_SSG_021714.indd 392/17/14 11:13 AM

Customer Deliver y Checklist
Smart Start Guide
• Remove this checklist from

S mart Start Guide
• Pe

rsonalization Features
(refer to your Owner’s Manual)
Wa rranty Information
Warranty
S tart Date:

Cu
stomer Ini tial:


• Basi

c Vehicle –
36 months/36,000 miles
• R

oadside assistance program
www.MyMazda.com
• Offer to register customer on

w ww.MyMazda.com
Owner’s Manual
PRESENTATION OF OWNER’S MATERIALS:

Review the following items with the customer
SERVICE DEPARTMENT
Introduce Service Manager;

provide business cards
Review Service and Parts
Department hours of operation
Explain free Full Circle
Service Inspection
Schedule first maintenance service
DEALERSHIP DAT E
SALES CONSULTANT CUSTOMER’S NAME
VIN E-MAIL
Maintenance Passport
Floor Mats
• E
nsure floor mats are properly hooked
after cleaning
• Do n

ot install two floor mats, one on
top of the other, on the driver side
• Ac

cessory rubber floor mats should be
cleaned with mild soap and water only
Tire Pressure Monitoring System
• System overview
• De

monstrate how to initialize the
TPMS system
Push and hold the “SET switch” until
th e TPMS warning light flashes twice
an

d one beep is heard
• Re

view the system Caution
1660320_15b_Mazda6_SSG_021714.indd 402/17/14 11:13 AM