2015 MAZDA MODEL 3 HATCHBACK instrument cluster

When Driving
5
Indicator light
Push button start
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) in the instrument cluster and the push button
start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds and
the i-stop warning light (amber) in the
instrument cluster illuminates.
The i-stop function can be turned back on by
pressing the switch again until the beep sounds
and the i-stop warning light (amber) turns off.
i-stop Warning Light, Beep
If a system malfunction occurs or system operation precautions are necessary, the
driver is notified by the warning beep and warning light in the instrument cluster.
Warning light/beep Verification
The i-stop warning light (amber) and
other warning lights illuminate while
the i-stop function is operating.
The i-stop warning light (amber)
flashes. The i-stop system may have some
kind of malfunction.
The i-stop indicator light (green)
flashes twice per second while the
i-stop function is operating. (Manual transaxle)
Check whether the shift lever is in the
neutral position. Have your vehicle inspected by an
expert repairer, we recommend an
Authorised Mazda Repairer as soon
as possible. Check whether the bonnet is open,
the driver's seat belt is unfastened, or
the driver's door is open.
If this is the case, the engine will not
automatically restart for safety
reasons.
Start the engine using the normal
method.
The warning beep sounds, and the
i-stop indicator light (green) flashes
twice per second (European model)
while the i-stop function is operating.Check whether the driver's door is
closed.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
5
6
7
8
9
10ABS Warning Light Master Warning Light
Charging System Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature Warning
Light (Red)/ Low Engine Coolant
Temperature Indicator Light (Blue)
i-stop Warning Light (Amber)
/Indicator Light (Green)
RVM Warning Light (Amber) /
Indicator Light (Green)
Automatic Transaxle Warning Light
11
12
13
14Power Steering Malfunction
Indicator Light
Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
15Seat Belt Warning Light
Door-Ajar Warning Light
17Low Washer Fluid Level Warning
Light
18
2022
23
24
30
31
32
33
Tyre Pressure Monitoring System
Warning LightHeadlight Auto-Leveling
Malfunction Indicator Light
High Beam Control System (HBC)
Warning Light (Amber) /Indicator
Light (Green)
Mazda Radar Cruise Control
(MRCC) Warning Light (Amber) /
Indicator Light (Green)
AFS OFF Indicator Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS) OFF
Indicator Light
i-ELOOP Indicator Light
Shift Position Indication
34
35
36
37
38Headlight High-Beam Indicator
Light
Direction Indicator/Hazard Warning
Indicator Lights
Security Indicator Light
Cruise Main Indicator Light (Amber) /
Cruise Set Indicator Light (Green)
40Adjustable Speed Limiter Main
Indicator Light(Amber)/ Adjustable
Speed Limiter Set Indicator Light
(Green)
Front Fog Light Indicator Light
41Rear Fog Light Indicator Light Signal Warning/Indicator Lights
Brake System Warning Light
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
19KEY Warning Light (Red) /Indicator
Light (Green)Glow Indicator Light
Diesel Particulate Filter Indicator
Light
Wrench Warning Indicator Light
25
26
27
Lane Departure Warning System
(LDWS) Warning Light (Amber) /
Indicator Light (Green)
28
29TCS/DSC Indicator Light
DSC OFF Indicator Light
Lights-On Indicator Light 39 Smart Brake Support/Smart City
Brake Support (SBS/SCBS)Warning
Light (Amber) /Indicator Light (Red)
21
16120 km/h Warning Light
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

12
When Driving
Mazda Radar Cruise Control (MRCC) Display Indication
Mazda Radar Cruise Control (MRCC) system
The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain,
fog, snow or other inclement weather conditions, or when the front surface of the
radiator grille is dirty.
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
NOTE
Under the following conditions, operation of the Mazda Radar Cruise Control
(MRCC) system is temporarily cancelled, a cancel indication is indicated in the
display in the instrument cluster, and the MRCC indicator light (green) turns off
simultaneously.
The setting status of the Mazda Radar Cruise Control (MRCC) system is indicated
in the active driving display.
Vehicle ahead display
MRCC Distance between vehicle displayMRCC Set
vehicle speed
• The CANCEL switch is pressed or the brake pedal is depressed.
• The parking brake is applied.
• The selector lever is in the P, N, or R position (for manual transmission
vehicles, R position only).
• The vehicle speed decreases to less than 25 km (15mph).
• The DSC, Smart Brake Support (SBS) system, or the Smart City Brake
Support (SCBS) system is operating.
• A system malfunction is detected.
Other details are described in the related text.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

16
When Driving
Smart Brake Support (SBS)
Smart Brake Support (SBS) is a system which alerts the driver of a possible
collision using an indicator and warning sound in the instrument cluster while the
vehicle is being driven at about 15 km/h or faster (10 mph or faster) and the
system's radar sensor (front) determines that your vehicle may hit a vehicle ahead.
Furthermore, if the radar sensor (front) determines that a collision is unavoidable,
the automatic brake control is performed to reduce damage in the event of a
collision.
For details, refer to Section 4, “Smart Brake Support (SBS)”.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
Smart Brake Support (SBS) is only designed to reduce damage in the event of a
collision. The ability to detect an obstruction is limited depending on the obstruction,
weather conditions, or traffic conditions. Therefore, if the accelerator pedal or brake
pedal is mistakenly operated it could result in an accident. Always verify the safety of
the surrounding area and depress the brake pedal or accelerator pedal while keeping
a safer distance from vehicles ahead or on-coming vehicles.
WARNING
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

20
When Driving
Diesel Particulate Filter
The diesel particulate filter collects and eliminates most of the particulate matter
(PM) in the exhaust gas of the diesel engine for improved exhaust gas processing
ability.
While the particulate matter (PM) collected in the diesel particulate filter is
eliminated automatically, fuel may be mixed with the engine oil increasing the
engine oil level. If the engine oil level exceeds the “X” mark on the dipstick,
replace the engine oil.
For details, refer to Section 4, “Tyre Pressure Monitoring System” or
“Diesel Particulate Filter”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD