2015 MAZDA MODEL 3 HATCHBACK navigation

16
2.4.4 Manipulating the map
By touching and dragging any part of the map screen, it can be moved to \
a location close to
the currently displayed map.
In addition, the map operation button is displayed, and by touching each\
of the buttons, you
can zoom in and out of maps, change the map perspective and select a des\
tination.
Action Button(s)Description
Map movement
using touch and
dragNo buttons
You can move the map in any direction: select
and hold the map, and move your fi nger towards
the direction you want to move the map.
Zooming in and out
, Changes how much of the map is displayed on
the screen.
The navigation system uses high-quality vector
maps that let you examine the map at various
zoom levels, always with optimized content.
Map scaling has a limit in 3D map view mode.
If you zoom out further, the map switches to 2D
view mode.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Tilting up and down
,
Changes the vertical view angle of the map in 3D
mode.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Rotating left and
right
,
Changes the horizontal view angle of the map.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Compass
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
Open/close
, The UMP (menu bar) is displayed on the lower
part of the screen.
Hides the displayed UMP if the UMP has been
displayed.
/"7"76#&JOEC







17
Select destination Select this button to select the Cursor as a new
destination. The route is automatically calculated.
Return to normal
navigation
Select this button to move the map back to follow
the current GPS position. Automatic map rotation
is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
2D or 3D view
, , When this button is selected, the map view mode
can be changed.
•
: The map is displayed so that north is up
regardless of the direction of travel.
•
: The map is rotated so that the direction
of travel is displayed in the upward direction.
•
: Displays things such as actual
construction sites three dimensionally on the
map.
Zoom-in/zoom-out
mode
You can zoom-in/zoom-out of maps.
Rotate mode
Rotates maps.
Perspective angle
mode
You can change the angle of perspective on a
map.
/"7"76#&JOEC







19
3 On-road navigation
You can set up your route in different ways:
If you need a route for immediate navigation, you can select the destination and start navigating
to it right away (normal navigation).
You can plan routes with multiple destinations. Select the fi rst destination. Then select a
second destination and add it to your route to create a multi-point rout\
e. You can add as many
destinations to your route as you like.
3.1 Selecting the destination of a route
The navigation system offers you several ways of choosing your destination:
• Enter a full address or a part of an address (page 20).
• Select a POI (point of interest) from a database as your destination (\
page 29).
• Searches the destination from the map (page 40).
• Use a previously saved Favorite destination (page 42).
• Select a location from the History of previously used destinations (pag\
e 43).
• Enter the coordinate of the destination (page 44).
Note! There are other convenient functions.
/"7"76#&JOEC







20
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to se\
lect the destination of the
route.
Using the same screen, you can fi nd an address by entering:
• Destination address
• The center of a city
• An intersection
• The midpoint of a street
Note! If an address or part of a facility name is input, a search candidate li\
st
including the input characters is displayed. The greater the number of
characters input the more the list is re
fi ned.
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1. Select
after selecting on the MAP screen.
2. Select
.
3. By default, the navigation system proposes the country and city where yo\
u are. If needed, select
, enter the fi rst few letters of the country name on the keyboard,
and select one country from the list of results.
/"7"76#&JOEC







22
6. Enter the house number:
a. Select
.
b. Enter the house number on the keyboard. (To enter letters, select
.)
c. Select
to fi nish entering the address. (If the entered house number cannot be
found, the midpoint of the street is selected as the destination.)
7. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
8. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







24
5. Instead of entering the house number, select
. The midpoint of the street is
selected as the destination.
6. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







26
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







28
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC