4897-2. Steps to take in an emergency
7
When trouble arises
LS600hL_U(OM50E41U)
Take out the towing eyelet. (P. 507, 516)
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the
hole and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
Securely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the hybrid system.
If the hybrid system does not start, turn the power switch to ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: P. 5 1 9
Emergency towing procedure
1
2
3
4
5
6
7
5688-2. Customization
LS600hL_U(OM50E41U)
Front seats
( P. 1 5 6 )
Driver’s seat movement
when exiting the vehicleStandard
Off
O—O
Pa r t i a l
Driver's seat lumbar sup-
port movement when exit-
ing the vehicle
OnOffO—O
Front passenger's seat
lumbar support firmness
adjustment when exiting
the vehicle
OnOff——O
Upward movement of
entire front passenger seat
during stowage when the
seat is stowed by using the
front passenger seat oper-
ation AUTO switch on
front console or the front
passenger seat operation
AUTO button on the rear
armrest
*1
OnOff——O
Po w e r
windows
( P. 1 8 9 )
and moon
roof
( P. 1 9 2 )
One-touch close opera-
tion using the power win-
dow switches on the front
passenger door and each
rear door
OnOff——O
One-touch front passen-
ger window or rear win-
dow close operation using
the power window switch
on the driver’s door
OnOff——O
Mechanical key linked
operationOnOff——O
Wireless remote control
linked operationOff
On
(Open only)
——O
Linked entry functionOnOff——O
ItemFunctionDefault settingCustom-
ized setting123
