9
Instrument Panel Dimmer ISG (Idle, Stop, Go) System*
The ISG system helps reduce fuel consumption by automatically
shutting down the engine when the vehicle is at a standstill
When the vehicle is at a standstill, the engine will stop and the green
AUTO STOP indicator on the instrument cluster will illuminate and
the message Auto Stop will appear in the LCD screen*
When ISG mode is ON, the engine will restart when the brake pedal
is released or the shift lever is moved to the R (Reverse) position or to
Sport mode When engine restarts, the green AUTO STOP indicator
on the instrument cluster will turn off
To deactivate the ISG System, press the ISG OFF button B If you
press again, the system will be activated
The ISG system is disabled when:
• A seat belt is unfastened
• The hood or a door is opened
• Battery condition is poor
• The front or rear defroster is turned on
• Engine coolant temperature is low
• The outside ambient temperature is too low/high
• Emission control devices activate
• The vehicle is on a steep slope
REMINDERS:
•ISG System is ON at vehicle start up
•Under certain conditions, the engine will restart automatically
• If the AUTO STOP indicator is illuminating yellow, please contact an authorized Kia dealer
With parking lights / headlights ON, press button A + or – to adjust display brightness of the
instrument panel illumination
REMINDERS:
• Door Mood Lamp is a fixed brightness and cannot be adjusted (not to be confused with Advanced Mood Lighting Speaker)
• The Instrument Panel Dimmer does not adjust brightness on the Navigation System* screen; use Navigation setup to adjust brightness on the Navigation System
For more information on the ISG System, please refer to your Owner’s Manual or contact your local dealership.
ISG (Idle, Stop, Go) System Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
www. KuTechVideo s.c om/p s13/2015
AOFF
OFFMUSIC
MOOD
AOFF
OFFMUSIC
MOOD
AOFF
OFFMUSIC
MOOD
AOFF
OFFMUSIC
MOOD
AOFF
OFFMUSIC
MOOD
A
B
QR CODE
(Buttons located on left side of Driver’s Panel)
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER
36
Opening the Hood:
1 Located on the bottom left
of the driver’s panel, pull
the Hood Release Lever A to unlatch the Hood
2 In the front of the vehicle,
lift the Hood slightly, push
the secondary Latch B
up inside of the Hood’s
center and lift the Hood
REMINDER: While lowering and closing, keep hands away from under the Hood
Hood Release Lever and Latch
Lift the C lever upwards
to release the fuel door
Fuel Door Release Lever
Closing the Hood:
Lower the Hood by pressing the front center of the Hood Then,
press down to securely lock in place
(Lever located on the driver’s floor near door sill)
A
B
C
Tire Mobility Kit Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
www. KuTechVideo s.c om/p s13/2015
QR CODETire Mobility Kit
REMINDERS:
• The Tire Mobility Kit requires the use of the 12V/15A /180W Power Outlet, which is located on the right side of the outlet /aux port area
• After tire is properly sealed, drive cautiously at no more than a total distance speed of 50 mph for no longer than a maximum distance of up to 120 miles
The Tire Mobility Kit may temporarily seal
certain types of tire damage
For operational information, please refer to
section 6 of your Owner’s Manual
A Sealant Bottle
B Compressor
•
•The Tire Mobility Kit is a temporary fix and is to be used for one tire only; the tire should be inspected as soon as possible •The kit should only be used for sealing/inflating passenger car tires; do not use for inflating any other type of tires •Some damaged tires cannot be sealed completely; do not use the kit if a tire is damaged beyond repair
QUICK TIPS
B
A
SOUL FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES
