Page 25 of 46

23
Voice Recognition and Phone Contact Tips
The Kia Voice Recognition System may
have difficulty understanding some accents
or uncommon names
When using Voice
Recognition to place a call, speak in a
moderate tone, with clear pronunciation
Help your Bluetooth
® Wireless Technology
Voice Recognition performance by making a
few simple changes to your phone contacts:
•
U
se full names vs
short or single syllable
names (“John Smith” vs
“Dad”; “Smith
Residence” vs
“Home”)
•
A
void using special characters or hyphens
(@, &, #, /, -, *, +, etc
)
•
A
void using acronyms (“In Case of
Emergency” vs
“ICE”)
•
S
pell words completely, no abbreviations
(“Doctor Goodman” vs
“Dr
Goodman”)
Bluetooth® Wireless Technology
Pairing a Phone
For instructions on how to pair a phone, refer to the audio system’s user’s
guide or your vehicle’s Quick Start Guide
How to Place a Call
When using the voice command feature, wait for the system BEEP before
speaking the command
T
here are two options for placing a call:
•
O
ption 1: Press the Receive/Place Call button
C (displays the phone
screen with number keypad)
•
O
ption 2: Press the Talk button
B Then say the command “Call {name}”
o
r “Dial {number}”
Voice Recognition Tips
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
R
efer to page 2 for more
information
www.KuTechVideos.com/ps23/2015
QR CODE
During the pairing process, be sure to accept the connection requests on the
phone for phonebook download and to allow acceptance of all future Bluetooth
®
connection requests
QUICK TIPS
Contacts Sync Tips
•
I
f Contact Sync is set to ON, contacts stored in your phone will download each time
your phone is connected
There may be a delay before the system is available to place
a call
•
I
f Contact Sync is set to OFF, your phone contacts will download only at the initial
pairing
This allows you to make calls without waiting for your phone contact list to
download QUICK TIPS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
STEERING WHEEL CONTROLS
Page 26 of 46

SOUL EV FEATURES & FUNCTIONS GUIDE24*IF EQUIPPED
CENTER PANEL
AVN \fAudio/Video/Navigation) System
– FM/AM/Si\fius®/M\bdia (Aux/USB/iPod®/BT Audio/My Music)
For further AVN System operation and using the app, refer to the
Car Multimedia System User’s Manual. REMINDERS:
Your vehicle’s audio system may differ from that in the
illustration . See your Owner’s Manual for more details.
The registered MyUVO .com account is activated for ve years
with no charges. When it expires, go to MyUVO.com and
register for the plan of your choice
When using the voice command feature, wait for
the system BEEP before speaking the command
Prolonged use of the AVN System in ACC mode may
drain the vehicle’s battery . A warning screen may
appear periodically to remind users that the AVN
System should be operated with the engine running to
prevent battery discharge
QUICK TIPS
To adjust the Sound settings (bass, middle, treble, fader, balance)
- Select the on-screen SOUND button on the audio mode’s main
screen. To adjust, press the on-screen arrows.
MAP
UVO
SEEK
TRACK
RADIO
MEDIA
NAVI
PHONE
INFO
SETUP
POWER
VOL TUNE
FILEPUSH
VOICE MAP
Press to Power ON/OFF.
Rotate to adjust Volume
Press to enter UVO eServices mode
Press to select FM/AM
Sirius
® Modes
Press to select MEDIA mode
Rotate to change Radio/Sirius
®
Stations/Media tracks/files Press to display the Map screen for
the current position / VOICE mode
Press to display the Destination menu screen
Press to enter PHONE mode
Press to display the SE TUP mode Press to display INFO mode
Press to change Radio/Sirius
®
Stations/Media tracks/files
Press to select previous/next Radio/
Sirius
® stations/ Media tracks/ files.
Press and hold to move quickly through stations/tracks/files
To use UVO EV Services:
1. Register through your AVN System or at MyUVO. com account
2. On the AVN System screen, verify the vehicle by pressing the UVO button
A and press the on-screen ACTIVATE button
3. Select the EXISTING ACCOUNT TAB and enter your email address and password from your MyUVO. com account
4. Then press the on-screen SUBMIT button to complete veri cation
5. On your Smartphone, go to an app store or marketplace to download the UVO EV Services App and log in to the app using
your MyUVO. com account credentials .
A
To view these videos on
your mobile device, snap
these QR Codes or visit the
listed website.
Refer to page 2 for more
information .
EV AVN System Videos
EV Services Activation
Video
www.KuTechVideos.com/audio/evavn
QR CODE
www.KuTechVideos.com/ps23/2015
Page 27 of 46

25ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL
Power Button
To start the vehicle:
1. Turn off all electrical devices
2. Depress the brake pedal
3. Press the POWER button while gear shift is in P (Park)
When Ready Indicator Light
is ON, the vehicle can be driven.
To turn the power off, press the POWER button again, and ensure the gear
shift is in (P) Park.
To use the POWER button, you must have the Smart Key fob on your person
or inside the vehicle.
P
POWER
To use electrical accessories:
Accessory position
• When in the OFF position (no light) and without depressing the brake pedal, press the POWER button once (Amber light
B)
On position
• When already in the ACC position ( Amber light
B) and without depressing the brake pedal, press the POWER button again (Reddish-orange light C)
• When in the OFF position (no light) and without depressing the brake pedal, press the POWER button twice ( Reddish-orange light
C)
Keeping the vehicle in ACC or the ON position without driving may discharge the vehicle’s battery.
REMINDERS:
When the Ready Indicator Light is illuminated, the vehicle can be operated
Do not operate the vehicle if the Ready Indicator Light is not illuminated
In an emergency situation while the vehicle is in motion, you are able to turn the vehicle off by
pressing the Power button for more than 2 seconds or 3 times within 3 seconds
If Smart Key fob battery is dead, hold the fob up against the POWER button
EV Power Button and
Smart Key Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.KuTechVideos.com/ps23/2015
BC
QR CODE
QUICK TIPS
Page 28 of 46

SOUL EV FEATURES & FUNCTIONS GUIDE26*IF EQUIPPED
CENTER PANEL
Automatic Climate Control
Climate Control Auto Function:
1. Press AUTO to select Full Auto Operation
2. Press MODE buttons to control which vents air ows through
Defrost Outside Windshield:
1. Set Fan Speed to the highest position
2. Set Temperature to Hot
3. Press the Defrost button
Defog Inside Windshield:
1. Set desired fan Fan Speed
2. Set desired Temperature
3. Press the Defrost button
REMINDERS:
Warm air may ow in through vents if Recirculated Air
button is not pressed ON (LED lit)
Your Automatic Climate Control system may differ from
those in the illustrations . See your Owner’s Manual for
more details
Air Flow Modes
To select Air Flow Modes, press the
Mode selection buttons:
Face-Level
Bi-Level
F lo o r- L evel
Floor/Defrost-Level
AUTO
OFF
FRONT
DRIVER
EV
HEAT
REAR
ONLY
A/C MODE
CLIMATE
PASSENGER
AIR BAG
DRIVER
EV
ONLYPASSENGERAIR BAG
Fan Speed Control buttons
Mode Selection button
Display CLIMATE control information
Rear Windshield Defroster button Automatic Climate
Control button
Air Conditioning ON/OFF button
Front Windshield Defroster button
Heat ON/OFF button
Temperature Control knob
System OFF button
DRIVER ONLY Ventilation button Recirculated Air buttonReserved Climate Control button
Keep inside glass as clean as possible to reduce
window fogging
Defrost Mode activates A /C and opens Fresh
Air Vent
During Auto Operation, the A /C indicator will NOT
illuminate. The fan speed, air intake, air ow and
air conditioning may automatically engage at any
time to reach desired temperature and reduce
humidity
QUICK TIPS
Page 29 of 46

27
Driver Only VentilationReserved Climate Control
Driver Only Ventilation restricts air flow to
the driver’s side vents only
This helps to
optimize driving range by limiting the power
drawn from the battery
P
ress DRIVER ONLY button
A to enable air
flow through the driver’s side vents only
R
eserved Climate Control is designed to pre-cool or heat the vehicle’s interior
to the preferred temperature while the vehicle is plugged into a charger
When Reserved Climate Control is set and the charging cable is connected,
climate control begins operating 30 minutes before the set departure time
P ress the Reserved Climate Control button B to display the settings for
appointed ventilation on the AVN
T
he Reserved Climate Control can also be set using the UVO EV Services App
For more information, refer to the Car Multimedia System User’s Manual.
AUTO
OFF
FRONT
DRIVER
EV
HEAT
REAR
ONLY
A/C MODE
CLIMATE
PASSENGER
AIR BAG
DRIVER
EV
ONLYPASSENGERAIR BAG
AB
12V120W12V180W
AUX USB
Aux/USB/iPod® Port & Power Outlets
REMINDER: For the Tire
Mobility Kit, only use the
12V/15A/180W Power Outlet,
located on the right side of
the outlet /aux
port area
The power outlets are inactive when ignition is in the OFF position
QUICK TIPS
To view these videos on
your mobile device, snap
these QR Codes or visit the
listed website
R
efer to page 2 for more
information
E
V A /C and Driver Only
Ventilation Video
USB Port Video
www.KuTechVideos.com/ps23/2015
QR CODE
www.KuTechVideos.com/ps23/2015
Digital Clock
AVN System Clock Setup*:
Press the SETUP key, then the CLOCK
button to display the Clock setting
screen
Then use the on-screen buttons
to navigate through setup
(Buttons located on Center Panel)
(Located on lower part of Center Panel)
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL
Page 30 of 46

SOUL EV FEATURES & FUNCTIONS GUIDE28*IF EQUIPPED
CENTER PANEL
REMINDERS:
• As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the ignition switch is turned ON
• If the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an authorized Kia dealer and have the system checked
• The EPB should not be operated while the vehicle is moving
• A click or electric brake motor sound may be heard while operating or releasing the EPB, but these conditions are normal and indicate that the EPB is functioning properly
Electric Parking Brake \fEPB)*
The Electric Parking Brake (EPB) system utilizes an electric motor to engage the
parking brake .
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A. Ensure that the indicator light
is illuminated on the instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed in Reverse or Drive.
To release EPB manually, depress the brake pedal, then press the EPB switch
A, with
the ignition switch in the ON position. Ensure that the indicator light
is OFF.
When leaving your keys with parking lot attendants or valet, make sure to inform them
how to operate the EPB
If parked on a steep incline/decline, pull up the EPB switch for more than 3 seconds for a
rmer EPB application
QUICK TIPS
ECOOFFECOOFF
ECOOFF
A
(Located below Gear Shift)
Electric Parking Brake
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.kutechvideos.com/audio/avn4
QR CODE
Page 31 of 46
29ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL
Automatic \bear Shift with Regenerative Brake Mode
P: Park
R: Reverse
N: Neutral
D: Drive
B: Regenerative Brake Mode
P
R
N
D
B
SHIFTLOCK
RELEASE
POWER
Regenerative Brake Mode “B” – Move the gear
shift to the “B” position B to enter the maximum
regenerative braking drive mode . This mode helps
to minimize energy loss and increase the distance
to empty .
For more information on Regenerative Brake Mode, refer to the
Owner’s Manual.
B
EV Regenerative Braking
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.KuTechVideos.com/ps23/2015
QR CODE
Page 32 of 46

SOUL EV FEATURES & FUNCTIONS GUIDE30*IF EQUIPPED
CENTER PANEL
Seat Warmers*
Press button once for high setting (2 LEDs lit). Press button twice for low
setting (1 LED lit). Press again to turn OFF.
Seat Warmers / Ventilated Seats*
Seat Warmers – Press top of button once for high setting (3 LEDs lit).
Press button twice for medium setting (2 LEDs lit). Press a third time for
low setting (1 LED lit) and again to turn OFF.
Ventilated Seats – Press bottom of button once for high setting (3 LEDs
lit). Press twice for medium setting (2 LEDs lit). Press a third time for low
setting (1 LED lit) and again to turn OFF.
AUTO
OFF
FRONT
REAR
A/C MODE
CLIMATE
PASSENGER AIR BAGactiveECO
(Buttons located on Center Panel)
(Buttons located on Center Panel)
AUTO
OFF
FRONT
REAR
A/C MODE
CLIMATE
PASSENGER AIR BAGactiveECO
Warming ( Yellow LED)
Ventilating (Blue LED)
System turns OFF when ignition is cycled. To turn system ON, press the seat
warmer switch
With the seat warmer switch in the ON position, the heating system in the seat
turns off or on automatically depending on the seat temperature
QUICK TIPS
Heated and Ventilated
Seats Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.KuTechVideos.com/ps23/2015
QR CODE