2015 KIA SORENTO Features and Functions Guide

23
A/CA /CR EA R
0 1
2
3
4
A/C
A /C
O
FF
M O
DE D
UAL
REA R
AUTOP
U SH P
U SHFR O NTREA R
CLEAN ONAUTOA UTOD UAL
Manual Climate Control*
•
• The 3rd Row A/C ON/OFF button indicator will not illuminate unless the 3rd Row Air Fan Speed switch A is turned ON
• Defrost Mode activates A/C and opens Fresh Air Vent
• MAX A/C Mode automatically engages Recirculated Air
QUICK TIPS
REMINDER: Your Manual Climate Control system may differ from those in the illustrations See your Owner’s Manual for more details
REMINDER: Warm air may flow in through vents if Recirculated Air button is not pressed ON (LED lit)
3rd Row Air
Conditioning Control*
REMINDER: Included in Manual & Automatic Climate Control Systems
REMINDER: Your Manual Climate Control system may differ from those in the illustration See your Owner’s Manual for more details
OFF
A
Defog Inside Windshield:
1 Set desired Fan Speed
2 Set desired Temperature
3 Press the Front Defrost button
Defrost Outside Windshield:
1 Set Fan Speed to the highest position
2 Set Temperature to Hot
3 Select Defrost mode
Defog Inside Windshield:
1 Set Fan Speed to desired position
2 Set desired Temperature
3 Select Defrost mode
To turn ON the 3rd Row Air Conditioning Control:
1 Press the 3rd Row A/C button
2 Set the fan speed A to the desired position
Air Flow Modes
To select Air Flow Modes, rotate the Mode selection knob:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level
Defrost-Level*
Air conditioning ON/OFF button
3rd row air conditioning ON/OFF* button
Recirculated air button
Fan speed control knob
Mode selection knob
Temperature control knob
Rear defroster button
(Type A shown)
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL

SORENTO FEATURES & FUNCTIONS GUIDE24
CENTER PANEL
PR
N
D
P R
N
D
P
R
N
D
SHIFTLOCK RELEASE
activeECO
AC
115V
POFF
Automatic Gear Shift with Sportmatic® Shifting
P: Park
R: Reverse
N: Neutral
D: Drive
[+]: Sport Mode Upshift
[–]: Sport Mode Downshift
Sport Mode: To enter Sport Mode,
move shift lever from D to left gate
Sport Mode Shifting: Move shif t
lever up [+] to Upshift or down [–]
to Downshif t
• Press brake pedal and depress release button to move gear shift from N to P, N to R or from P to any gear
• Sport mode downshifts are made automatically when the vehicle slows down When the vehicle stops, 1st gear is automatically selected
QUICK TIPS
Kia Sportmatic® Shifting Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
w w w. KuTechVideos .com/xm13/2015
QR Code
*IF EQUIPPED

25ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
SEATING
Driver Position Memory System*
To store a seating position into memory, first place the gear shifter into P (Park) while the ignition switch is on Then:
1 Adjust the driver’s seat and outside rearview mirror
2 Press the SET button A on the control panel System will beep once
3 Press one of the memory buttons B within 5 seconds The system will beep twice when memory has been stored
1
SET 2
Seat Warmers/Ventilated Seats*
Press button once for high setting (3 LEDs
lit) Press button twice for medium setting
(2 LEDs lit) Press button a third time for low
setting (1 LED lit) and again to turn OFF
Seat Warmers – Press right side of button
once for high setting (3 LEDs lit) Press
button twice for medium setting (2 LEDs lit)
Press a third time for low setting (1 LED lit)
and again to turn OFF
Ventilated Seats – Press left side of button
once for high setting (3 LEDs lit) Press twice
for medium setting (2 LEDs lit) Press a third
time for low setting (1 LED lit) and again to
t u r n O F F
Seat Warmers only*Seat Warmers/Ventilated Seats*
Warming (Yellow LED)Ventilating (Blue LED)
• With the seat warmer switch in the ON position, the heating system in the seat turns OFF or ON automatically depending on the seat temperature
• System turns OFF when ignition is cycled To turn system ON, press the seat warmer switch
QUICK TIPS
A
B
Hig hM ed iu m Lo wH ig h Med iu m Lo wH ig h Med iu m Lo wH ig hM ed iu m Lo w
Seat Warmers and Ventilated Seats Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
w w w. KuTechVideos .com/xm13/2015
(Located on Center Panel)(Located on Center Panel)
Hig hM ed iu m Lo wH ig h Med iu m Lo wH ig hM ed iu m Lo wH ig h Med iu m Lo w
H ig h Med iu m Lo wH ig h Med iu m Lo wH ig h Med iu m Lo wH ig h Med iu m Lo w

26
Power Adjustable Driver’s Seat*
Move/Press controls to adjust Seat forward/backward, Seat
Cushion, Seatback or Lumbar
SeatbackLumbar
Seat forward/backwardSeat Cushion
AA
BC
A
AB
C
C
DBA
6-Way Manual Adjustable Driver’s Seat*
Pull lever A to slide Seat forward/backward
Pull/press lever B to adjust Seat Height
Pull lever C to adjust Seatback Recline
Press button D to adjust Lumbar Support*
SORENTO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
SEATING

27
Folding 2nd & 3rd Row Seats*
2nd Row Seat — Folding Flat:
3rd Row Seat* Folding:
1 Insert the Rear Seat Belt buckle into the pocket* between the Rear Seatback and Seat Cushion then insert the Seat Belt into the guide
2 Set the 2nd Row Seatback to the upright position
3 Pull the Seatback folding strap D and fold Seat forward
2nd Row Seat - Unfolding:
1 Pull Seatback to an upright position Then lift Seatback Folding Lever A again to adjust Seatback for use
A
B
The right side of the 2nd Row Seat has more clearance to access the 3rd Row Seat*
QUICK TIPS
2nd Row Seat — Walk-In Fold*:
D
C
1 Insert the Rear Seat Belt strap into the guide* next to the Rear Seatback
2 Lift the Walk-In Lever C on the Rear Seatback and slide the seat forward to the farthest position
1 Insert the Rear Seat Belt strap into the guide* next to the Rear Seatback
2 Set the Front Seatback to the most upright position and lower the rear seat headrests to the lowest position
3 Pull the Seatback Folding Lever A
4 Fold the Rear Seatback flat B
It may be necessary to slide the Front Seat forward and to slide the Rear Seatback backward to fully lower seats
It may be necessary to slide the 2nd Row Seat forward to fully lower 3rd Row Seats
QUICK TIPS
QUICK TIPS
When returning Seat to its original position, ensure that it ’s locked into position, unfold the Headrest, and return Seatbelt to its proper position
QUICK TIPS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
SEATING

SORENTO FEATURES & FUNCTIONS GUIDE28
SEATING
Front Seat Headrest Adjustment
To adjust headrest forward: Pull bottom of headrest
forward at an angle
To adjust headrest back: Push bottom of headrest
backward at an angle
To raise headrest: Pull headrest up
To lower headrest: Press lock A, then press the
headrest down
Front Active Headrests*
Moves forward in the event of certain impact
collisions to help protect the driver’s and front
passenger’s heads from moving backward, thus
helping to minimize neck injuries
To reset the headrest back: Pull forward at an upward
angle to the farthest position and release
*IF EQUIPPED
A
For easy adjustments, hold a headrest post with one hand while using the other hand to pull the headrest up from underneath
QUICK TIPS

29ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
OTHER KEY FEATURES
Smart Key*
The Smart Key’s signal can be blocked by the normal operation of a cellular phone or smartphone To help prevent this, store each device separately
QUICK TIPS
REMINDER: Remote button configuration may vary depending on vehicle options
REMINDER: Remote button configuration may vary depending on vehicle options
A Press the release button
to unfold the key
B Press to lock All Doors
C Press to unlock Driver’s
Door: Press twice in 4
seconds to unlock All
Doors and Rear Hatch,
and manually open
D Press and hold for more
than 1 second to unlock
Rear Hatch and manually open
E Press and hold more than a half second
for Panic Alarm To turn OFF Alarm,
press any button
Remote Keyless Entry
(Folding Key)*
Lock
Unlock
• Turn clockwise once to unlock
Driver ’s Door
• Turn clockwise again within 4
seconds to unlock All Doors
• Turn counterclockwise
once to lock
All Doors
Double-Turn Lock/Unlock All
Kia Engine Stop/Start Button and Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
w w w. KuTechVideos .com/xm13/2015
HOLD
HOLD
HOLD
A
B
C
D
E
A Press to lock All Doors
B Press to unlock Driver’s Door
Press twice within 4 seconds
to unlock All Doors
C Manual Rear Hatch: Press and
hold to unlock Rear Hatch and
manually open
REMINDER: The Rear Hatch does not automatically open when the C button is pressed
REMINDER: The Rear Hatch unlocks when the Smart Key fob is within close proximity of the vehicle
C Power Tailgate*: Press and hold for Power
Tailgate to open automatically Press
again at any time to stop Press again to
automatically close
D Press and hold more than a half second for
Panic Alarm To turn off Alarm, press any button
E Press to release Mechanical Key
Mechanical Key F:
• Use to unlock driver’s door
• Use to enable/disable Child Safety Locks
(page 35)
• Use to lock glove box
Driver’s Door Lock/Unlock button G:
• Press button once to unlock driver’s door
• Press again within 4 seconds
to unlock all doors
•
Press again to lock all doors
HOLD
HOLDHOLD
D
A
B
E
C
F
G

30
•
• You can reprogram a single HomeLink ® button by repeating Step 2
• Erasing programmed buttons will delete all trained transmitters
QUICK TIPS
The Auto-Dimming Rearview Mirror is designed to help
reduce glare from a vehicle’s headlights located in the
rear and also connect up to three electronic transmitters
in one location
To turn automatic dimming ON or OFF, press button F
HomeLink® with Auto-Dimming
Rearview Mirror*
How to Sync Transmitter with HomeLink®*
Erasing programmed buttons:
A HomeLink® button
B HomeLink® button
C Indicator light
D HomeLink® button
E Glare detection sensor
F Automatic dimming ON/OFF
G Compass control button
If programming for the first time, begin with Step 1
(repeating this step will delete all information)
To program non-rolling and rolling code garage door
openers and other devices:
1 Press and hold the left A and center D buttons
simultaneously until the indicator light C begins to
flash (to reprogram buttons, skip this step)
2 Press and hold the desired button A B D and hold
the button on the transmitter while it is approximately
1 to 3 inches away from the mirror The HomeLink®
Indicator light C will flash rapidly once the frequency
signal has been successfully programmed
To finish programming rolling code garage door openers,
complete these steps:
3 Locate the “learn” or “smart ” button on the garage
door’s motor head unit Press and release the button
and complete Step 4 within 30 seconds
4 Firmly press and release the programmed HomeLink®
button up to three times
Press and hold the left A and center D buttons
simultaneously for approximately 20 seconds,
and then release both buttons within 30 seconds
Operating HomeLink®:
Press one of the programmed HomeLink® buttons REMINDER: Mirror indicator light C will illuminate when automatic dimming is ON
If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s HomeLink® system, you may need to purchase a HomeLink® Repeater Kit. For more information, go to www.HomeLink.com or call (800) 355-3515 .
ABCDEFG
SORENTO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES