15ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS
STEERING WHEEL CONTROLS
*IF EQUIPPED
Voice Recognition and Phone Contact Tips
The Kia Voice Recognition System may have difficulty understanding some accents or uncommon names When using Voice Recognition to place a call, speak in a moderate tone, with clear pronunciation
Help your Bluetooth® Wireless Technology Voice Recognition performance by making a few simple changes to your phone
contacts:
• Use full names vs short or single
syllable names (“John Smith”
vs “Dad”, “Smith Residence” vs
“Home”)
• Avoid using special characters or
hyphens (@, &, #, /, -, *, +, etc )
• Avoid using acronyms (“In Case
Emergency” vs “ICE”)
• Spell words completely, no abbreviations (“Doctor
Goodman” vs “Dr Goodman”)
Contacts Sync Tips
• If Contact Sync is set to ON, contacts stored in your phone will download each time your phone is connected There may be a delay before the system is available to place a call
• If Contact Sync is set to OFF, your phone contacts will download only at the initial pairing This allows you to make calls without waiting for your phone contact list to download
QUICK TIPS
Bluetooth® Wireless Technology
Pairing a Phone
For instructions on how to pair a phone, refer to the audio system’s user’s guide or your vehicle’s Quick Start Guide
During the pairing process, be sure to accept the connection requests on the phone for phonebook download and to allow acceptance of all future Bluetooth® connection requests
QUICK TIPS
Voice Recognition Tips Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
w w w. KuTechVideos .com/xm13/2015
How to Place a Call
When using the voice command feature, wait for the system BEEP before speaking the command
There are two options for placing a call:
Standard Audio System
• Option 1: Press the Receive/Place Call button D (system will prompt you through call process)
• Option 2: Press the Talk button C (system will BEEP to indicate it is ready for call placement) Then say the command “Call {name}” or “Dial {number}”
UVO System
• Option 1: Press the Receive/Place Call button D (displays the phone screen with number keypad)
• Option 2: Press the Talk button C Then say the command “Call {name}” or “Dial {number}”
Navigation System
• Option 1: Press the Receive/Place Call button D (displays the phone screen with number keypad)
• Option 2: Press the Talk button C Then say the command "Call Name" or "Dial Number", followed by phone book name or number
17
Audio System Setup Options
Press the SETUP button, then use the TUNE knob to cycle through
the available settings for each equipped audio option Press the
TUNE Knob to adjust the audio option selected Audio options
may include the following:
SCAN
SETUP
MENU
MEDIA
RADIO
PHONE
VOL
POWER
PUSH
DISP
SEEK
TRACK1 2 3
4 5 6
TUNE
FILE
ENTER
RPT RDM
CAT
FOLDER
SCAN
SETUP
MENU
MEDIA
RADIO
PHONE
VOL
POWER
PUSH
DISP
SEEK
TRACK 1
2 3
4 5 6
TUNE
FILE
ENTER
RPT RDM
CAT
FOLDER
VOL
POWER
PUSHTUNE
FILE
MEDIA
FM/AM
PHONE S AT
SEEK
TRACK MAP
VOICE DEST
ROUTE
CD-IN
Loading...
Smart ITself
• Display Settings• Sound Settings• System Settings
Standard Audio System Overview/Operation —
FM/AM/SiriusXM®/Media (CD, USB, iPod®, Aux, My Music, BT Audio)*
For further audio system operations, refer to pages 18-20.
Press to Power ON/OFF. Rotate to adjust Volume
Press Preset buttons (1- 6) to select Radio/SiriusXM® stations. Press and hold to save Radio/SiriusXM ® stations
Press to selectMedia (CD, USB , iPod® , Aux, My Music, BT Audio)* modes
Press to display Phone mode
Press to select FM/AM/SiriusXM ® ModesPress to play each song in the Media file for 10 seconds. To cancel S C A N Play, press again
Press to turns screen ON/OFF
Press to enter the system SETUP mode
Press to display menus for the current modes
Rotate to change Radio/Media (CD, USB , iPod® , Aux, My Music, BT Audio)* songs. Press to select Audio Mode to adjust settings. Rotate to change Audio Modes
Press to select previous/next for Media (CD, USB , iPod® , Aux, My Music, BT Audio)*
Standard Audio System Videos To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
http://kutechvideos.com/audio/base_system
REMINDER: Your vehicle’s audio system may differ from that in the illustration See your Owner’s Manual for more details
To adjust the sound settings (Bass, middle, treble,
fader, balance), select Sound settings in the SETUP
menu Then use the TUNE knob to cycle to the
selection and then press the TUNE knob to select
Turn the TUNE knob left/right to adjust sound setting
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
AUDIO SYSTEM
19
For further UVO System information, refer to the UVO System User’s Manual. For further audio system operations, refer to pages 17-20.
SCAN
SETUP
MENU
MEDIA
RADIO
PHONE
VOL
POWER
PUSH
DISP
SEEK
TRACK 1
2 3
4 5 6
TUNE
FILE
ENTER
RPT RDM
CAT
FOLDER
SETUP
eServices
MEDIA S AT
FM/AM
PHONE
VOL
POWER
PUSH
DISP
TUNE
FILE
ENTER
SEEK
TRACK CATEGORY
VOL
POWER
PUSHTUNE
FILE
MEDIA
FM/AM
PHONE S AT
SEEK
TRACK MAP
VOICE DEST
ROUTE
CD-IN
UVO eServices System*
Press to eject CDPress to turn LCD Display & Backlight ON/OFF
Press to display PHONE mode
Press to display SETUP mode
Press to display eServices mode
In SiriusXM ® mode, press to move to the previous/next category
Press to select next /previous station/track/channel/song/file. Press and hold to move quickly through the stations/tracks/channels/songs/files
Press knob to turn Power On/Off.Rotate knob to adjust Volume
Press to select MEDIA mode. Then press F M /A M button to toggle through the Media modes
Press to select SiriusXM® mode
Press to select F M /A M mode
In Radio/SiriusXM®/Media modes, rotate knob to search for stations/ channels/tracks/songs/files. Press knob to receive the selected station/channel/track/song/file
Insert CD
UVO eServices Sytem Videos To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
http://kutechvideos.com/audio/UVO _eServices
REMINDER: Your vehicle’s audio system may differ from that in the illustration See your Owner’s Manual for more details
•
• When using the voice command feature, wait for the system BEEP before speaking the command
• Only MP3 or WMA files may be played or copied to Jukebox Commercial CDs or CDs with a CDDA (compact disc digital audio) cannot be copied to Jukebox
• At any time you can interrupt UVO System Command Feedback by pressing the TALK button
• Prolonged use of the UVO system in ACC mode may drain the vehicle’s battery
• If equipped, HD Radio™ is available when selecting FM/AM Mode
QUICK TIPS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
AUDIO SYSTEM
SCAN
SETUP
MENU
MEDIA
RADIO
PHONE
VOL
POWER
PUSH
DISP
SEEK
TRACK 1
2 3
4 5 6
TUNE
FILE
ENTER
RPT RDM
CAT
FOLDER
SETUP
eServices
MEDIA S AT
FM/AM
PHONE
VOL
POWER
PUSH
DISP
TUNE
FILE
ENTERSEEK
TRACK CATEGORY
VOL
POWER
PUSHTUNE
FILE
MEDIA
FM/AM
PHONE S AT
SEEK
TRACK MAP
VOICE DEST
ROUTE
CD-IN
SORENTO FEATURES & FUNCTIONS GUIDE20*IF EQUIPPED
AUDIO SYSTEM
Press to display MAP/VOICE mode
Press to display DESTINATION mode
Press to display Info/UVO eServices/Setup Mode
Press to display ROUTE mode
Press to display PHONE mode
Press to Power ON/OFF. Rotate to adjust Volume
Press to select previous/next Radio/SiriusXM® stations /Media files. Press and hold to move quickly through stations/tracks/files
Press to select FM/AM Modes
Press to select SiriusXM® Mode
Press to select Media (C D , MP3 , USB , iPod® , Aux, BT Audio, My Music) mode
Press to eject CD
Rotate to change Radio/SiriusXM® Stations/Media files
Navigation System with FM/AM/SiriusXM®*/Media
(CD, MP3, USB, iPod®, Aux, BT Audio, My Music) Modes
Navigation Audio System Videos To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
http://kutechvideos.com/audio/nav_eServices
REMINDER: Your vehicle’s audio system may differ from that in the illustration See your Owner’s Manual for more details
Prolonged use of the Navigation System in ACC mode may drain the vehicle’s battery A warning screen may appear periodically to remind users that the Navigation System should be operated with the engine running to prevent battery discharge
QUICK TIPS
When using the voice command feature, wait for the system BEEP before speaking the command
QUICK TIPS
For further navigation system operation, refer to the Digital Navigation System User’s Manual.
To adjust the sound settings (Bass, middle, treble, fader,
balance), select the on-screen Sound button on the audio
mode's main screen To adjust, press the on-screen arrows
Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury and death The driver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or that are not permissible by law should never be used during operation of the vehicle
For further audio system operations, refer to pages 17-19.
21ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS
CENTER PANEL
Center Panel Clock Setup*:
Press the H button A to advance the time by one hour
Press the M button B to advance the time by one minute
Navigation System Clock Setup*:
Press the Info/Settings key on the Audio Control Unit Then
press the on-screen Setup button and select the Clock icon
Then use the on-screen buttons to navigate through setup
Press button A to turn the 2nd Row Power Outlet
ON (LED lit)
Press and hold both for more than 5 seconds to switch from 12 to 24 hour formats
QUICK TIPS
Digital Clock
A
B12VMAX
120W12VMAX
120WAUX USB
Aux/USB/iPod® Port
& Power Outlets
•
• The powet outlets are inactive when the ignition is in the OFF position
• The 115 volt AC outlet operates only when vehicle engine is ON
QUICK TIPS
Kia USB Port Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
w w w. KuTechVideos .com/xm13/2015
REMINDER: The Center Panel Digital Clock and Navigation System Clock are not synchronized and may differ slightly
Press the DONE button* on the Navigation screen to ensure changes are saved
QUICK TIPS
*IF EQUIPPED
P
R
N
D
P R
N
DP
R
N
D
SHIFTLOCK RELEASE
activeECOAC
115VPOFF
AC 115V
MAX 150W
(Driver/Front Passenger)
(Button located below Gear Shift) (2nd Row AC Power Outlet)
A
23
A/CA /CR EA R
0 1
2
3
4
A/C
A /C
O
FF
M O
DE D
UAL
REA R
AUTOP
U SH P
U SHFR O NTREA R
CLEAN ONAUTOA UTOD UAL
Manual Climate Control*
•
• The 3rd Row A/C ON/OFF button indicator will not illuminate unless the 3rd Row Air Fan Speed switch A is turned ON
• Defrost Mode activates A/C and opens Fresh Air Vent
• MAX A/C Mode automatically engages Recirculated Air
QUICK TIPS
REMINDER: Your Manual Climate Control system may differ from those in the illustrations See your Owner’s Manual for more details
REMINDER: Warm air may flow in through vents if Recirculated Air button is not pressed ON (LED lit)
3rd Row Air
Conditioning Control*
REMINDER: Included in Manual & Automatic Climate Control Systems
REMINDER: Your Manual Climate Control system may differ from those in the illustration See your Owner’s Manual for more details
OFF
A
Defog Inside Windshield:
1 Set desired Fan Speed
2 Set desired Temperature
3 Press the Front Defrost button
Defrost Outside Windshield:
1 Set Fan Speed to the highest position
2 Set Temperature to Hot
3 Select Defrost mode
Defog Inside Windshield:
1 Set Fan Speed to desired position
2 Set desired Temperature
3 Select Defrost mode
To turn ON the 3rd Row Air Conditioning Control:
1 Press the 3rd Row A/C button
2 Set the fan speed A to the desired position
Air Flow Modes
To select Air Flow Modes, rotate the Mode selection knob:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level
Defrost-Level*
Air conditioning ON/OFF button
3rd row air conditioning ON/OFF* button
Recirculated air button
Fan speed control knob
Mode selection knob
Temperature control knob
Rear defroster button
(Type A shown)
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL
25ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
SEATING
Driver Position Memory System*
To store a seating position into memory, first place the gear shifter into P (Park) while the ignition switch is on Then:
1 Adjust the driver’s seat and outside rearview mirror
2 Press the SET button A on the control panel System will beep once
3 Press one of the memory buttons B within 5 seconds The system will beep twice when memory has been stored
1
SET 2
Seat Warmers/Ventilated Seats*
Press button once for high setting (3 LEDs
lit) Press button twice for medium setting
(2 LEDs lit) Press button a third time for low
setting (1 LED lit) and again to turn OFF
Seat Warmers – Press right side of button
once for high setting (3 LEDs lit) Press
button twice for medium setting (2 LEDs lit)
Press a third time for low setting (1 LED lit)
and again to turn OFF
Ventilated Seats – Press left side of button
once for high setting (3 LEDs lit) Press twice
for medium setting (2 LEDs lit) Press a third
time for low setting (1 LED lit) and again to
t u r n O F F
Seat Warmers only*Seat Warmers/Ventilated Seats*
Warming (Yellow LED)Ventilating (Blue LED)
• With the seat warmer switch in the ON position, the heating system in the seat turns OFF or ON automatically depending on the seat temperature
• System turns OFF when ignition is cycled To turn system ON, press the seat warmer switch
QUICK TIPS
A
B
Hig hM ed iu m Lo wH ig h Med iu m Lo wH ig h Med iu m Lo wH ig hM ed iu m Lo w
Seat Warmers and Ventilated Seats Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
QR Code
w w w. KuTechVideos .com/xm13/2015
(Located on Center Panel)(Located on Center Panel)
Hig hM ed iu m Lo wH ig h Med iu m Lo wH ig hM ed iu m Lo wH ig h Med iu m Lo w
H ig h Med iu m Lo wH ig h Med iu m Lo wH ig h Med iu m Lo wH ig h Med iu m Lo w
27
Folding 2nd & 3rd Row Seats*
2nd Row Seat — Folding Flat:
3rd Row Seat* Folding:
1 Insert the Rear Seat Belt buckle into the pocket* between the Rear Seatback and Seat Cushion then insert the Seat Belt into the guide
2 Set the 2nd Row Seatback to the upright position
3 Pull the Seatback folding strap D and fold Seat forward
2nd Row Seat - Unfolding:
1 Pull Seatback to an upright position Then lift Seatback Folding Lever A again to adjust Seatback for use
A
B
The right side of the 2nd Row Seat has more clearance to access the 3rd Row Seat*
QUICK TIPS
2nd Row Seat — Walk-In Fold*:
D
C
1 Insert the Rear Seat Belt strap into the guide* next to the Rear Seatback
2 Lift the Walk-In Lever C on the Rear Seatback and slide the seat forward to the farthest position
1 Insert the Rear Seat Belt strap into the guide* next to the Rear Seatback
2 Set the Front Seatback to the most upright position and lower the rear seat headrests to the lowest position
3 Pull the Seatback Folding Lever A
4 Fold the Rear Seatback flat B
It may be necessary to slide the Front Seat forward and to slide the Rear Seatback backward to fully lower seats
It may be necessary to slide the 2nd Row Seat forward to fully lower 3rd Row Seats
QUICK TIPS
QUICK TIPS
When returning Seat to its original position, ensure that it ’s locked into position, unfold the Headrest, and return Seatbelt to its proper position
QUICK TIPS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
SEATING