2015 JEEP WRANGLER warning light

[x] Cancel search: warning light

Page 487 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual WARNING!
If TSC activates while driving, slow the vehicle
down, stop at the nearest safe location, and adjust the
trailer load to eliminate trailer sway.
Hill Descent Control (HDC) — If Equipped
HDC

Page 511 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual WARNING!
Tires and the spare tire should be replaced after six
years, regardless of the remaining tread. Failure to
follow this warning can result in sudden tire failure.
You could lose control and ha

Page 516 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual three hours, or driven less than 1 mile (1.6 km) after a
three-hour period.Refer to “Tires – General Informa-
tion” in “Starting and Operating” for information on
how to properly inflate the

Page 518 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual CAUTION!(Continued)
•After inspecting or adjusting the tire pressure,
always reinstall the valve stem cap. This will
prevent moisture and dirt from entering the valve
stem, which could damage the Ti

Page 521 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual NOTE:
•If your vehicle is equipped with a matching full-size
spare wheel and tire assembly, it has a tire pressure
monitoring sensor, and can be monitored by the Tire
Pressure Monitoring System (TPM

Page 523 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual Tire Pressure Monitoring Low Pressure Warnings
The Tire Pressure Monitoring Telltale Light will
illuminate in the instrument cluster, and an au-
dible chime will be activated, when one or more of the

Page 524 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual the pressure value(s) will stop “flashing,” and the Tire
Pressure Monitoring Telltale Light will extinguish once
the updated tire pressure(s) have been received.
NOTE:When filling warm tires, the

Page 525 of 695

JEEP WRANGLER 2015 JK / 3.G Owners Manual The EVIC will also display a#SERVICE TPM SYSTEM#
message for a minimum of five seconds when a system
fault is detected possibly related to an incorrect sensor
location fault. In this case, the#SERVICE