REAR SEAT CONTROLS
2
Executive class rear seats
1. Lumbar support adjustment.
2.
F
orward and backward seat adjustment.
3.
Seatbac
k angle adjustment.
4.
F
ront passenger seat adjustment: Press to select
and then use switches 2 and 3 to make the required
adjustments.
Note: When front passenger seat adjustment is selected,
switch 2 is used to operate the front passenger seat
forward and backward movement plus the raising and
lowering of the seat. Switch 3 will adjust front passenger
seatback angle.
Rear seat position memory
Once you have adjusted the rear seats, the settings can
be stored in the vehicle memory for future use.
1.
Press and hold the s
witch to return the rear seat to
the Home position. This allows easier entry and exit.
2.
Memor
y set button. Press to activate the memory
function.
3.
Memor
y presets. Press one of the preset buttons
within 5 seconds to memorize the current settings. Note: A seat position can be memorized only during the 5
second period.
Note: An existing setting for a memory preset button will
be over-written by a new memory setting.
Rear seat massage
1. Massage:
Press to turn the massage function on/off.
2.
Press to select rolling w
ave massage.
3.
Press to select lumbar w
ave massage.
4.
Press to select shoulder w
ave massage.
Note: The massage programs have a specific timed cycle
which will need to be re-selected for continuous use.
The Rear seat massage can also be set via the Touch
screen.
REAR SEAT CONTROLS
3
Rear seat folding table
To open the table: Pull the table by the handle (1) and
then pull the underneath front edge of the table (2) to
guide it in to it’s final horizontal position (3).To close the table: Pull the front edge underneath of
the table down and then push the table into the closed
position.
Touch screen seat control
All seating positions can be controlled via the Touch
screen. On the Front climate menu, touch Remote
seats. Now select Remote seat control.
1.
T
ouch to select the seat to be adjusted. Once
selected, the driver can adjust the seat using his seat
adjustment controls on the side of the seat.
2.
The seat selected f
or adjustment will be highlighted 3.
Rear easy entr y: Touch to turn Rear easy entry On/
Off. When On is selected, the rear seats will automatically
move to the Home position when a rear door is opened,
to allow easier entry and exit.
4.
Reset rear seats
: The rear seats can be reset to the
Home position by the driver. Touch to enable the driver’s
memory set button (number 3 button) as a reset button
for the rear seats.
Care point
Rear seat adjusters should not be actuated when a
LATCH child seat is fitted.
