4
Blind Spot Warning (BSW) System (if so equipped)
The control switch is located on the left side of the
instrument panel.
The system automatically turns on when the
engine is started and the indicator light on the
switch
1 illuminates.
The BSW indicator lights
2, located next to the
outside mirrors, will activate when the BSW system
detects a vehicle in the detection zone.
If the turn signal is activated in the direction of a
detected vehicle, a chime sounds twice and the BSW
indicator light will flash.
To cancel the system, push the control switch and the
warning systems ON indicator will extinguish.
For more information, refer to the “Instruments and controls (section 2)” and
the “Starting and driving (section 5)” of your Owner’s Manual.
new system features
1
2
Lane Departure Prevention (LDP) System
(if so equipped)
This system will help you return the vehicle to the
center of the traveling lane by applying brake control
to the left or right wheels individually (for a short
period of time).
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
1923534_15c_Infiniti_QX50_QRG_122314.indd 412/23/14 1:04 PM
7
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key System allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
1 or the liftgate request switch 2
or press
the
button 3
on the key fob.
To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch
1 or the
liftgate request switch 2; the corresponding door will unlock.
Push the door handle request switch
1 or the liftgate request
switch 2 again within 1 minute; all other doors will unlock, or
• Press the
button
4 on the key fob to unlock the driver’s side
door. Press the button again; all other doors will unlock.
The Intelligent Key can also be used to activate the panic alarm by
pressing and holding the
button 5 for more than 1 second. Once
activated, the panic alarm and headlights will stay on for a period of t\
ime.
INFINITI INTELLIGENT KEY BATTERY DISCHARGE
If the battery in the Intelligent Key is almost discharged,
the guide light
6 of the Intelligent Key port blinks and
the Intelligent Key insertion indicator 7 is displayed
in the vehicle information display.
To start the engine under these circumstances, insert
the Intelligent Key into the key port with the key ring
side facing backward until it latches into place. Then
push the ignition switch to start the engine.
To remove the Intelligent Key from the port, push the
ignition switch to turn the engine off and then pull the
Intelligent Key out of the port.
The Intelligent Key port does not charge the Intelligent
Key battery. If you see the Intelligent Key warning light
8, replace the battery in the Intelligent Key.
Do not insert the mechanical key or other objects into
the key port because they will damage the key port.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)”, “Starting and driving (section 5)” and the “Maintenance
and do-it-yourself (section 8)” of your Owner’s Manual.F E
1
2
3
4
5
6
7
8
1923534_15c_Infiniti_QX50_QRG_122314.indd 712/23/14 1:04 PM
