2015 INFINITI Q70 HYBRID key fob

13
first drive features
INFINITI Intelligent Key System
It is important to make sure the Intelligent Key is with
you (that is, in your pocket or purse).
The INFINITI Intelligent Key system allows you to lock
or unlock your vehicle, open your trunk and start
the engine.
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 1 once or press the
button 2 on the key fob.
To unlock the vehicle, perform one of the following procedures:
•
Push either door handle request switch 1 once;
the corresponding
door will unlock. Push the door handle request switch 1 again within

1 minute; all other doors will unlock, or
• Press the button 3 on the key fob to unlock the driver’s side door.

Press the
button again; all other doors will unlock.
To open the trunk, press the button 4 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pres\
sing
and holding the button
5 for more than 1 second. Once activated, the panic alarm and headlights will stay on for a period of time.

INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged or
environmental conditions interfere with the Intelligent
Key operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key, and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starti\
ng and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
1
2
3
4
5

14
first drive features
Trunk Lid Release
Use one of the following methods to unlatch the trunk lid
then lift the lid to open the trunk:
Push the trunk open request switch 1 under the

trunk handle while carrying
the INFINITI Intelligent Key
with you.
Press the HOLD button
2 on the key fob for more than 1 second.
From inside the vehicle, push the trunk lid release
switch 3 .
For more information, refer to the
“Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
1
2
123
Seat Adjustments
To slide the seat forward or backward, push the switch

1 forward or backward.
To recline the seatback, push the switch
2
forward or backward.
SEAT LIFTER
To adjust the angle of the front seat cushion or height
of the seat, push the front or rear end of the switch
1 up or down.

LUMBAR SUPPORT
To adjust the seat lumbar support, push the front or back end of the swi\
tch
3 .
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
3

15
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
1 memory.
Follow these steps to set the memory positions:
•
Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions,
using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to your preferences.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
To link a memorized position to your INFINITI Intelligent Key, press the\
UNLOCK button on
the key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
1 right or left.
Adjust each mirror to the desired position using the
switch
2 .
To fold the outside rearview mirrors, push the switch
3 to the
position. To unfold the outside rear-
view mirrors, push the switch
3 to the
position.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right or left outside mirror can be sel\
ected to automati-
cally turn downward.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirror \
control switch 1 .
4. The outside mirror surface moves downward.
When one of the following conditions has occurred, the outside mirror su\
rface will return to
its original position.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the central or neutral posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
23
1