2015 HYUNDAI I20 lock



*($'!#(%'*
PPetrol containing alcohol andmethanol
Gasohol, a mixture of petrol and
ethanol (also known as grain alco-
hol), and petrol or gasohol containing
methanol (also known as wood alco-
hol) are being marketed along with or
instead of leaded or unleaded petrol.
Do not use gasohol containing more
than 10% ethanol, and do not use
petrol or gasohol containing any
methanol. Either of these fuels may
cause drivability problems and dam-
age to the fuel system.
Discontinue using gasohol of any
kind if drivability problems occur.
Vehicle damage or driveability prob-
lems may not be covered by the
manufacturer’s warranty if they result
from the use of:
1. Gasohol containing more than
10% ethanol.
2. Petrol or gasohol containing methanol.
3. Leaded fuel or leaded gasohol.
Use of MTBE
HYUNDAI recommends avoiding
fuels containing MTBE (Methyl
Tertiary Butyl Ether) over 15.0% vol.
(Oxygen Content 2.7% weight) in
your vehicle.
Fuel containing MTBE over 15.0%
vol. (Oxygen Content 2.7% weight)
may reduce vehicle performance and
produce vapor lock or hard starting.
Your New Vehicle Limited
Warranty may not cover damage
to the fuel system and any per-
formance problems that are
caused by the use of fuels con-
taining methanol or fuels contain-
ing MTBE (Methyl Tertiary Butyl
Ether) over 15.0% vol. (Oxygen
Content 2.7% weight.)
CAUTION
Never use gasohol which contains
methanol. Discontinue use of any
gasohol product which impairs dri-
vability.
CAUTION

6
"!!" " " !
"#!"! #! "#
1. Door lock\bunlock button ............514
2. Outside rearview mirror foldingswitch*........................................5\f5
\f. Outside rearview mirror control switch*........................................5\f4
4. Power window switches ............520
5. Power window lock switch ........52\f
6. Headlight leveling device*..........585
7. Instrument panel illumination control switch*............................5\f7
8. Fuel filler door opener* ..............527
9. Fuse
box.................\4..................\4.96 2
10. Steering wheel ........................5\f0
11. Seat ..........................................42
12. Clutch pedal ............................720
1\f. Brake pedal..............................7\f0
14. Accelerator pedal
15. Hood release lever ..................525
* : if equipped
OIB01400\fThe actual shape may differ from the illustration.

7
"!!" " " !

"!## #! "#
1. Light control\bTurn signals ..........581
2. Steering wheel audio controls* ....64
\f. Instrument cluster ......................5\f6
4. Horn ..........................................5\f1
5. Driver's front air bag* ................4\f7
6. Wiper\bWasher ............................589
7. Trip mode switch* ....569, 57\f, 576
8. Engine Start\bStop button ............79Key ignition switch ......................75
9. Manual transaxle ......................719 Continuously Variable
Transaxle ..................................72\f
10. Power outlet ..........................5126
11. USB charger* ........................5127
12. Manual climate control system ..597
Automatic climate control
system ..................................5106
1\f. Audio system* ..................69, 6\f7
14. Hazard switch ............................82
15. Central door lock switch ..........515
16. Passenger's front air bag* ......4\f7
17. Glove box ..............................5121
* : if equipped
OIB017004R
The actual shape may differ from the illustration.

8
"!!" " " !
#"#!#
OIB074056

Petrol Engine (Kappa 1.2 MPI)
The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant
reservoir............9 31
2. Radiator
cap ..................\4............9 32
\f. Brake\bclutch
fluid reservoir ........9\f 5
4. Air
cleaner ..................\4..............9\f 9
5. Engine oil
dipstick................\4......92 8
6. Engine oil filler
cap ..................\4..92 8
7. Windshield washer fluid reservoir
..................\4..................\494 2
8. Engine room junction
block ......96 4
9. Battery
..................\4..................\4..94 5
* : if equipped


"!!" " " !

OIB074001
Diesel Engine (U II 1.4 TCI)The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant
reservoir............9 31
2. Radiator
cap ..................\4............9\f 2
\f. Brake\bclutch
fluid reservoir ......9\f 5
4. Air
cleaner ..................\4..............9\f 9
5. Engine oil
dipstick................\4......92 9
6. Engine oil filler
cap ..................\4..9 30
7. Windshield washer fluid reservoir
..................\4..................\494 2
8. Engine room junction
block ......96 4
9. Battery
..................\4..................\4..94 5


"&t%'s%st&'!"'%!'&&
Driver’s seat
•Never attempt to adjust seat
while the vehicle is moving. This
could result in loss of control, and
an accident causing death, seri
ous injury, or property damage.
•Do not allow anything to interfere
with the normal position of the
seatback. Storing items against a
seatback or in any other way
interfering with proper locking of
a seatback could result in serious
or fatal injury in a sudden stop or
co

llision.
•Always drive and ride with your
seatback upright and the lap por
tion of the seat belt snug and low
across the hips. This is the best
position to protect you in case of
an accident.
(Continued)
WARNING (Continued)
•In order to avoid unnecessary
and perhaps severe air bag
injuries, always sit as far back as
possible from the steering wheel
while maintaining comfortable
control of the vehicle.
Rear seatbacks
•The rear seatback must be
securely latched. If not, passen
gers and objects could be thrown
forward resulting in serious injury
or death in the event of a sudden
stop or collision.
•Luggage and other cargo should
be laid flat in the cargo area. If
objects are large, heavy, or must
be piled, they must be secured.
Under no circumstances should
cargo be piled higher than the
seatbacks. Failure to follow these
warnings could result in serious
injury or death in the event of a
sudden stop, collision or rollover.(Continued)
WARNING
(Continued)
•No passenger should ride in the
cargo area or sit or lie on folded
seatbacks while the vehicle is
moving. All passengers must be
properly seated in seats and
restrained properly while riding.
•When resetting the seatback to
the upright position, make sure it is
securely latched by pushing it for
ward and backwards.
•To avoid the possibility of burns,
do not remove the carpet in the
cargo area. Emission control
d

evices beneath this floor gener
ate high temperatures.
After adjusting the seat, always
check that it is securely locked into
place by attempting to move the
seat forward or backward without
using the lock release lever.
Sudden or unexpected movement
of the driver's seat could cause
you to lose control of the vehicle
resulting in an accident.
WARNING


"&t%'s%st&'!"'%!'&&

Front seats
Forward and rearward
To move the seat forward or rear
ward:
1. Pull the seat slide adjustmentlever up and hold it. 2. Slide the seat to the position you
desire.
3. Release the lever and make sure the seat is locked in place.
Adjust the seat before driving, and
make sure the seat is locked secure
ly by trying to move forward and rear
ward without using the lever. If the
seat moves, it is not locked properly.
•Do not adjust the seat while wear
ing seat belts. Moving the seat
cushion forward may cause
strong pressure on the abdomen.
•Use extreme caution so that
hands or other objects are not
caught in the seat mechanisms
while the seat is moving.
•Do not put a cigarette lighter on
the floor or seat. When you oper
ate the seat, gas may gush out of
the lighter and cause fire.
•If there are occupants in the rear
seats, be careful while adjusting
the front sea
t position.
WARNING
OIB034029
OIB034002
Type A
Type B


"&t%'s%st&'!"'%!'&&
Seatback angle
To recline the seatback:
1. Lean forward slightly and lift up onthe seatback recline lever.
2. Carefully lean back on the seat and adjust the seatback of the
seat to the position you desire. 3. Release the lever and make sure
the seatback is locked in place.
(The lever MUST return to its orig
inal position for the seatback to
lock.)
Seat cushion height
(for driver’s seat, if equipped)
To change the height of the seat
cushion, move the lever upwards or
downwards.
• To lower the seat cushion, push thelever down several times.
• To raise the seat cushion, pull the lever up several times.
OIB034028
OIB034003
Type A
Type B
OIB034004