2015 Hyundai H350 lock

3-17
Convenient features of your vehicle
3. Close the mid sliding door.
To open the mid sliding door, pull the
outside door handle.
Even though the door may be
unlocked, the mid sliding door will
not open by pulling the inner doorhandle until mid sliding door child
safety lock is unlocked.Your vehicle's mid sliding door may
be equipped with an electrical step.
When getting in and out of the vehi-
cle, use the grab handles and electri-
cal step.If you turn on the step switch to oper-
ate the electrical step, the electrical
step automatically extends when themid sliding door is opened and
retracts when it is closed. When the
electrical step is either in operation
or extended out, the electrical step
indicator illuminates on the instru-
ment cluster.
3
Mid sliding door lock
If children accidentally open the mid sliding door while the vehi-
cle is in motion, they could fall
out and be severely injured or
killed. To prevent children fromopening the mid sliding door
from the inside, the mid sliding
door safety lock should be used
whenever children are in the
vehicle.
WARNINGOEU044188
OEU044048
EE
LLEE CCTT RR IICC AA LL SS TT EEPP (( IIFF EE QQ UUIIPP PPEEDD ))

3-18The default setting of the STEP
switch is the ON position.
Press the STEP switch, when the
electrical step is not in use in regard-less of opening/closing of the mid-
sliding door.
In this case, the LED indicator on the
STEP switch goes OFF.
To use the electrical step, re-press
the STEP switch. Then, the LED indi-
cator on the STEP switch will illumi-
nate.
Conditions to extend the electrical step:
1) The vehicle is stopped.
2) The shift gear is in N (Neutral).
3) Either the parking brake or the
foot brake is applied.
The electrical step automatically
retracts in from the “extending-out”position, when the conditions 1 and 2are unsatisfied. When the electrical step is extend-
ed out, the accelerator inter-lock
operates to block the vehicle
acceleration for your safety.
NOTICE
Convenient features of your vehicle
Never move the shift lever,
when any passengers exit or
enter the vehicle through the
mid sliding door. In this situa-
tion, shifting the gear out of N(Neutral) causes the electrical
step to abruptly retract and the
passengers to fall from it, caus-
ing the serious body injury.
Always make sure that all pas-
sengers enter or exit the vehi-
cle, before shifting the gear.
WARNING
If you do not use the grab han-
dle and the step, you could
injure yourself when getting in
and out of the vehicle.
To prevent risks:
Draw the passengers' atten-
tion to the electrical step. Wait
until the electrical step is fully
extended.
Do not jump out of the vehi-
cle.
Only use the grab handle and
step. Only they are designed
for such a load.
Keep grab handles, access
steps and entry sills free from
dirt, e.g. mud, clay, snow and
ice.
WARNING

3-19
Convenient features of your vehicle
Operation and obstacle detec- tion
The electrical step (1) is equipped
with a device to detect an obstacle infront.
When the electrical step comes into contact with an obstacle while
extending out, its movement auto-
matically stops with 'short but repeti-
tive' warning alarms.
To fully extend out the electrical step
again, take the following steps. First,
remove the obstacle. Second, closeand then re-open the mid-sliding
door. Finally, repetitively press the
STEP switch to turn OFF and turn
ON the electrical step.
If the electrical step hinders load-
ing, you can block the step when
opening the sliding door by using
the obstruction detection. Thismeans that the electrical step
remains retracted and a fork-lift
truck or another lifting vehicle can
move closer to the load compart-ment.
Electrical step warning alarm
1.Continuous beeping sound You will hear this type of alarm,
whenever the electrical step oper-
ates.
2.Short beeping sound (short & repetitive)
You will hear this type of alarm,
when the parking/foot brakes arereleased.
In this case, apply the parking/foot
brakes for your safety.
3.Long beeping sound (long & repet- itive)
You will hear this type of alarm,
when the operation of the electrical
step temporarily fails due to opera-
tional/electrical problems.
In this case, remove foreign sub-
stances, such as sand, mud, and
ice. Then, re-press the STEP
switch to operate the electrical
step.
However, if the problem persists,
manually push in the electrical step
as a safety measure. Still, we rec-
ommend you to have the electrical
step repaired by an authorized
HYUNDAI dealer.
NOTICE
3
Never drive your vehicle, when
the electrical step is extended
out. It may cause an accident,
strike with other vehicles, and
even injure passers-by. Always
drive your vehicle with the elec-
trical step fully retracted in.
WARNING

3-22
After cleaning the step should be
allowed to dry. When dry, a day or
two later perhaps, apply silicons
spray to help lubricate the movement
of the step.
Do not use grease. Avoid use of oil, it
will simply wash away.
If the conditions are particularly bad
daily cleaning may be required.
Failure to clean the step regularly or
to service the steps may result in the
failure of the step in service. This will
not be covered under warranty.
We recommend that mud flaps are
fitted to your vehicle.
Convenient features of your vehicle
RR
EEAA RR DD OO OORR (( IIFF EE QQ UUIIPP PPEEDD ))
If you open a rear door, you could:
endanger other people or road
users
be caught by oncoming traffic.
This is particularly the case if
you open the rear door more
than 90°. There is a risk of an
accident and injury.
Only open the rear doors when traffic conditions permit.
Always make sure that the rear
door is properly locked.
WARNING
The rear lights will be covered if
you open the rear doors to the90° detent position.
The vehicle will then be unsafe as its rear lights will not be vis-
ible for approaching traffic.
Other road users may not real-
ize until too late that it is an
obstruction. This could lead toan accident.
You should ensure that the
vehicle is visible from the rear
in accordance with the relevant
national regulations, by using
the warning triangle for
instance.
WARNING
Make sure that there is suffi-
cient clearance when opening
the rear doors. You could other-
wise damage the vehicle and
objects in close range of the
rear doors.
CAUTION

3-23
Convenient features of your vehicle
3
Opening/closing from the out- side
Opening the right-hand reardoor
Pull handle (1) . Swing the rear door to the side until
it engages.
Opening/closing from the inside
Opening the right-hand reardoor
Release the lever on the inside of the
right rear door.
You can only open the locked rear
doors from the inside if the child-
proof locks have not been activat-ed. To unlock:
Slide latch (2) to the
right. You will see a allow mark.
To open: Pull opening lever (1) up
and open the rear door.
Latch (2) slides to the right when
you open a locked rear door from
the inside. The white section is
visible. Only the rear door
unlocks. The other doors remain
locked.
To close: Make sure that the left-
hand rear door is closed.
Pull the rear door firmly by the door handle to close it.
To lock: Slide latch (2) to the left.
NOTICE
NOTICE
OEU044010
OEU044006
UnlockLock

3-25
Convenient features of your vehicle
3
Vehicles with 270° pivoting rear
doors: If door retainer (1) malfunctions
while loading, you can swivel it
180° against the spring force and
onto the door and engage it. Thedoor retainer remains in this posi-
tion and will not swivel back to itsoriginal position.
Before closing the door, release
door retainer (1) from the detentand return it to its original posi-tion.
Closing the rear doors from the outside (if equipped)
Pull the rear door away from mag-
netic door retainer.
Close the left-hand rear door firmly
from the outside.
Child-protector rear door lock (if equipped)
The child safety lock is provided to
help prevent children from acciden-tally opening the rear door from
inside the vehicle. The rear door
safety locks should be used whenev-
er children are in the vehicle.
1.Open the rear door.
2.Turn the child safety lock located onthe rear edge of right side door to
the "Lock" position. When the child
safety lock is position, reardoor will
not open even though the inner door
handle is pulled inside the vehicle. 3. Close the rear door.
To open the rear door, pull the out-
side door handle.
Even though the door may be
unlocked, the rear door will not open
by pulling the inner door handle until
rear door child safety lock is
unlocked.
NOTICE
OEU044073
Rear door lock
If children accidentally open the
rear door while the vehicle is in
motion, they could fall out and
be severely injured or killed. To
prevent children from opening
the rear door from the inside,
the rear door safety lock should
be used whenever children are
in the vehicle.
WARNING
Lock
Unlock

3-26
Convenient features of your vehicle
(1) Driver's door unlock/lock switch
(2) Automatic power window up */down switch (Driver's side)
(3) Automatic power window down switch (Driver's side)
(4) Passenger's door unlock / lock switch
(5) Automatic power window down switch (Passenger's side)
(6) Rear seat window (Type A)
(7) Rear seat window (Type B)
*: if equipped
Information
In cold and wet climates, power win-
dows may not work properly due to
freezing conditions.
i
WW IINN DDOO WW SS
OEU045046/OEU044080/OEU044014
■Type A (if equipped)■Type B (if equipped)

3-27
Convenient features of your vehicle
3
Power windows
The ignition switch must be in the ON
position for power windows to oper-
ate. Each door has a power window
switch that controls the door's win-
dow. The driver has a power window
lock switch which can block the oper-
ation of front passenger windows.
The power windows can be operated
for approximately 30 seconds after
the ignition key is removed or turned
to the ACC or LOCK position.
However, if the front doors are
opened, the power windows cannot
be operated even within the 30 sec-
onds period.
Window opening and closing
To open or close a window, press
down or pull up the front portion of
the corresponding switch to the firstdetent position (2).
Auto down window
Pressing the power window switch
momentarily to the second detent
position (3) completely lowers the
driver's window even when the
switch is released. To stop the win-
dow at the desired position while the
window is in operation, pull up the
switch momentarily to the opposite
direction of the window movement.
OEU044044OEU044012