2015 Hyundai Elantra fuse

Maintenance
64 7
Fuse NameSymbol Fuse ratingProtected component
FUSE
TCU220AA/T - TCM (G4FC)
STOP LAMP15AStop Lamp Switch, Smart Key Control Module, Stop Lamp Relay
S/HEATER
FRT20ADriver/Passenger Seat Heater Module
HORN15ARLY.3 (With Theft Alarm), RLY.8
F/PUMP25AF/PUMP Relay (FFV eng. Only)
IG240AW/O Smart Key : Ignition Switch, RLY.5, With Smart Key : RLY.5, RLY.9
ABS230AABS Control Module, ESC Control Module, Multipurpose Check Connector
IG140AW/O Smart Key : Ignition Switch, With Smart Key : RLY.4, RLY.6
SUB F/PUMP
15A
SUB F/PUMP Relay (FFV eng. only)
F/PUMPF/PUMP Relay (not FFV eng. only)
A/CON COMP10AA/C Comp Relay
INJECTOR10AInjector #1/ #2/ #3/ #4, F/Pump Relay, A/C Comp Relay
ECU210AECM
ECU120AECM

765
Maintenance
Fuse NameSymbol Fuse ratingProtected component
FUSE
SENSOR110AImmobiliser Module (W/O Smart Key)
SENSOR210AOxygen Sensor (DOWN), Variable Intake Solenoid Valve, Oil Control Valve #1/ #2,
Purge Control Solenoid Valve, RLY.11
ECU415AECM, PCM
IGN COIL120AIgnition Coil #1/ #2/ #3/ #4, Condenser

Maintenance
66 7
LIGHT BULBS
Use only the bulbs of the specified
wattage.
All bulbs are available from your
HYUNDAI dealers Parts
Department.
WARNING - Working on
the lights
Prior to working on a light, firm-
ly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.CAUTION
Be sure to replace a blown bulb
with one of the same wattage
rating. Otherwise, it may cause
damage to the fuse or electric
wiring system.
CAUTION
Headlight aiming adjustment
may be necessary after the
headlight assembly is rein-
stalled. If you are unsure how to
replace or aim the headlight, we
recommend that you consult
with an authorised HYUNDAI
dealer.
CAUTION
If you don’t have the necessary
tools, the correct bulbs and the
expertise, consult an authorised
HYUNDAI dealer. In many cases,
it is difficult to replace vehicle
light bulbs because other parts
of the vehicle must be removed
before you can get to the bulb.
This is especially true if you
have to remove the headlight
assembly to get to the bulb(s).
Take care when
removing/installing the head-
light assembly to prevent dam-
age to the vehicle.