Page 56 of 569

Continued
55
uuAirbags uAirbag System Indicators
Safe Driving
■When side curtain airbags de ploy in a frontal collision
One or both side curtain airbags may inflate in a moderate-to-severe angled frontal  collision.
In this case, the side curtain airbags will deploy slightly after the front airbags.Airbag System IndicatorsIf a problem occurs in the airbag system, the SRS indicator will come on and a 
message appears on the multi-information display.
■When the power mode is set to ON
The indicator comes on for a few seconds, 
then goes off. This tells you the system is 
working properly.
If the indicator comes on at any other time, or does not come on at all, have the 
system checked by a dealer as soon as possible. If you don't, your airbags and seat 
belt tensioners may not work properly when they are needed.
■
Supplemental Restraint  System (SRS) Indicator
1Supplemental Restraint System (SRS) Indicator
3
WARNING
Ignoring the SRS indicator can result in 
serious injury or death if the airbag systems 
or tensioners do not work properly.
Have your vehicle checked by a dealer as 
soon as possible if the SRS indicator alerts 
you to a possible problem. 
         
        
        
     
        
        Page 58 of 569

57
uuAirbags uAirbag Care
Safe Driving
Airbag CareYou do not need to, and should not, perform any maintenance on or replace any 
airbag system components yourself. However, you should have your vehicle 
inspected by a dealer in the following situations:■When the airbags have deployed
If an airbag has inflated, the control unit and other related parts must be replaced. 
Similarly, once an automatic seat belt tensioner has been activated, it must be 
replaced.■When the vehicle has been in  a moderate-to-severe collision
Even if the airbags did not inflate, have your dealer inspect the following: the driver’s 
seat position sensor, weight sensors in the passenger’s seat, front seat belt 
tensioners, and each seat belt that was worn during the crash.■Do not remove or modify  a front seat without consulting a dealer
This would likely disable the driver's seat position sensor or the weight sensors in the 
passenger's seat. If it is necessary to remove or modify a front seat to accommodate 
a person with disabilities, contact a dealer, or for U.S. vehicles, American Honda 
Automobile Customer Service at 800-999-1009 and for Canadian vehicles, Honda 
Canada Customer Relations at 888-9-HONDA-9.
1 Airbag Care
We recommend against the use of salvaged airbag 
system components, including the airbag, tensioners, 
sensors, and control unit. 
         
        
        
     
        
        Page 72 of 569
71Safe Driving
Safety LabelsLabel LocationsThese labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels 
carefully.
If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact a  dealer 
for a replacement.
Sun Visor
U.S. models Canadian models
Radiator 
Cap Doorjambs
U.S. models
U.S. models only
Dashboard
Canadian models
High Voltage System Components U.S. models Canadian models 
         
        
        
     
        
        Page 75 of 569

74Instrument Panel
IndicatorsIndicator
Name
On/Blinking
Explanation
Message
Parking Brake 
and Brake 
System Indicator 
(Red)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off if the parking brake 
has been released.●Comes on when the parking brake 
is applied, and goes off when it is 
released.●Comes on when the brake fluid 
level is low.●Comes on if there is a problem 
with the brake system.●The beeper sounds and the 
indicator comes on if you drive 
with the parking brake not fully 
released.
●Comes on while driving - Make sure 
the parking brake is released. Check the 
brake fluid level.
2 What to do when the indicator 
comes on while driving P. 536
●Comes on along with the brake 
system indicator (amber)  - Immediately 
stop in a safe place. Contact a dealer for 
repair. The brake pedal becomes harder 
to operate. Depress the pedal further 
than you normally do.●Comes on along with the ABS 
indicator  - Have your vehicle checked by 
a dealer.
2 If the Brake System Indicator (Red) 
Comes On  P. 536
Brake System 
Indicator 
(Amber)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on if there is a problem 
with the cooperative control with 
regenerative braking, the electric 
servo brake system, or the hill start 
assist system.
●Stays on constantly  - Avoid high speeds 
and sudden braking. Take the vehicle to a 
dealer immediately.
U.S.Canada(Red)U.S.Canada(Amber) 
         
        
        
     
        
        Page 76 of 569
75
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
POWER 
SYSTEM 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on if there is a problem 
with the electric vehicle system.●Comes on when the High Voltage 
battery temperature becomes high 
while the battery is being charged.
●Have your vehicle checked by a dealer.
READY Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on when the vehicle is 
ready to drive.
2Turning on the Power  P. 420
EV Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on when the vehicle is 
moved by the motor, and the 
engine is not operating.
—
—
EV Mode 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on when the vehicle is in EV 
mode.
2 SPORT HYBRID i-MMD 
(intelligent Multi Mode 
Drive)  P. 10
— 
         
        
        
     
        
        Page 77 of 569

76
uuIndicators u
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Low Oil Pressure 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on when the engine oil 
pressure is low.
●Comes on while driving  - Immediately 
stop in a safe place.
2 If the Low Oil Pressure Indicator 
Comes On  P. 534
Malfunction 
Indicator Lamp
●Comes on when you set the power 
mode to ON, and goes off either 
when the power system is on or 
after several seconds if the vehicle 
did not start. If “readiness codes” 
have not been set, it blinks five 
times before it goes off.●Comes on if there is a problem 
with the emissions control system.●Blinks when a misfire in the 
engine's cylinders is detected.
●Readiness codes are part of the on board 
diagnostics for the emissions control 
systems.
2Testing of Readiness Codes  P. 549
●Comes on while driving - Have your 
vehicle checked by a dealer.●Blinks while driving  - Stop in a safe 
place where there are no flammable 
objects. Stop the power system for 10 
minutes or more, and wait for the engine 
to cool down. Then, take the vehicle to a 
dealer.
2 If the Malfunction Indicator Lamp 
Comes On or Blinks  P. 535
12-Volt Battery 
Charging System 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when 
the power system is on.●Comes on when the 12-volt 
battery is not charging.
●Comes on while driving  - Turn off the 
climate control system and rear defogger 
in order to reduce electricity 
consumption.
2 If the 12-Volt Battery Charging 
System Indicator Comes On  P. 534 
         
        
        
     
        
        Page 78 of 569

77
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Shift Lever 
Position Indicator
●Indicates the current shift lever 
position.
2Shifting  P. 424
—
Transmission 
Indicator
●Blinks if the transmission system 
has a problem.
●Blinks while driving  - Avoid sudden 
starts and acceleration and have your 
vehicle checked by a dealer immediately.
Seat Belt 
Reminder 
Indicator
●Comes on and the beeper sounds 
if you are not wearing a seat belt 
when you set the power mode to 
ON.●If the front passenger is not 
wearing a seat belt, the indicator 
comes on a few seconds later.●Blinks while driving if either you or 
the front passenger has not 
fastened a seat belt. The beeper 
sounds and  the indicator blinks at 
regular intervals.
●The beeper stops and the indicator goes 
off when you and the front passenger 
fasten their seat belts.●Stays on after you or the front 
passenger has fastened the seat belt  
- A detection error may have occurred in 
the sensor. Have your vehicle checked by 
a dealer.
2 Seat Belt Reminder  P. 39 
         
        
        
     
        
        Page 79 of 569

78
uuIndicators u
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Low Fuel 
Indicator
●Comes on when the fuel reserve is 
running low (approximately 2.3 U.S. 
gal./8.8 Liter left).●Blinks if there is a problem with the 
fuel gauge.
●Comes on - Refuel your vehicle as soon 
as possible.●Blinks  - Have your vehicle checked by a 
dealer.
Anti-lock Brake 
System ( ABS) 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●If it comes on at any other time, 
there is a problem with the ABS.
●Stays on constantly  - Have your 
vehicle checked by a dealer. With this 
indicator on, your vehicle still has 
normal braking ability but no anti-lock 
function.
2 Anti-lock Brake System (ABS) 
P. 458
Supplemental 
Restraint System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on if a problem with any of 
the following is detected:
-Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
●Stays on constantly or does not 
come on at all  - Have your vehicle 
checked by a dealer.