4
remote Keyless entry transmI tter
Unlock
Press to unlock the driver’s door. Press
again to unlock all doors and the liftgate.
Lock
Press to lock all doors and the liftgate.
The driver’s door will not lock if open.
Liftgate
Press to open/stop/close the power
liftgate
F.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle.
The turn signal lamps will flash and the
horn will sound.
Press and hold to activate the alarm. The
turn signal lamps will flash and the horn will
sound until the button is pressed again or
the ignition is turned on.
Remote Vehicle StartF
Press and release the Lock button and
then press and hold the button until the
turn signal lamps flash to start the engine
from outside the vehicle. After entering the
vehicle, turn the ignition to the On position.
– During a remote start, the engine will
run for 10 minutes.
– Press and hold the
button until
the parking lamps turn off to cancel a
remote start.
Note: To change the remote lock, unlock,
and remote start settings, go to Remote Lock,
Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
With the vehicle in Park, push down the lever on the left side of the steering column to\
adjust the steering wheel. The steering wheel can then be moved up or do\
wn and in or
out. After adjustment, pull up the lever to lock the steering wheel in place.
See Instruments and Controls in your Owner Manual.
rear Door safety loc Ks
F Optional equipment
Press the rear door Safety Locks
button located on the center of the instru-
ment panel to prevent the rear doors
from opening from the inside. Press
again for normal operation.
See Keys, Doors and Windows in your Owner Manual.
tI lt/ telescoPIc steer Ing Wheel
14
cruIse control
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the thumbwheel up to resume a
set speed.
When the system is active, rotate the
thumbwheel up to increase speed.
SET– Set/Coast
When the system is active, rotate the
thumbwheel down to decrease speed.
Cancel
Press to cancel the cruise control but retain
the set speed in memory.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.
Setting Cruise Control
1. Press the
ON/OFF button. The
Cruise Control symbol will illuminate in
white in the instrument cluster.
2. When traveling at the desired speed,
rotate the SET– thumbwheel down
to set the speed. The
symbol will
illuminate in green in the instrument
cluster.
for War D collIsIon alert/lane DeParture Warn IngF
Forward Collision Alert
When approaching a vehicle directly ahead
too quickly, a visual alert flashes on top of
the instrument panel and beeps sound.
Press the Collision Alert button on
the left side of the steering wheel to set
the alert timing.
Lane Departure Warning
When crossing a detected lane marking without using a turn signal, a visual alert flashes
on top of the instrument panel and beeps sound.
Press the Lane Departure Warning button on the left side of the steering wheel to
turn the system on or off.
See Driving and Operating in your Owner Manual.
F Optional equipment
