2015 FORD SUPER DUTY maintenance schedule

[x] Cancel search: maintenance schedule

Page 444 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Ford Motor Company has recommendedmaintenance intervals for various partsand component systems based uponengineering testing. Ford Motor Companyrelies upon this testing to determine themost appropriat

Page 445 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Check every six months
Hinges, latches and outside locks for proper operation. Lubricate if necessary.
Parking brake for proper operation.
Safety belts and seat latches for wear and function.
Safety w

Page 446 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Be sure to ask your dealership serviceadvisor or technician about the multi-pointvehicle inspection. It is a comprehensiveway to perform a thorough inspection of
your vehicle. Your checklist gives you

Page 447 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Other maintenance items
Replace front wheel bearing grease and grease seal if non-sealed bearings are used.
Replace spark plugs.Every 97500 miles (156000km)
Change engine coolant.**
Every 105000 miles

Page 448 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Towing a trailer or using a car-top carrier
Inspect and lubricate U-joints.Inspect frequently, serviceas requiredSee axle maintenance items under Exceptions.
Inspect the wheels and related components

Page 449 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Extensive idling or low-speed driving for long distances, as in heavy commercial use(such as delivery, taxi, patrol car or livery)
Change transfer case fluid (Four-wheel drive vehicles).Every 30000 mi

Page 450 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Off-road operation
Inspect steering linkage, ball joints and U-joints, Lubricateif equipped with grease fittings.Inspect frequently, serviceas required
Replace engine air filter.
Change engine oil and

Page 451 of 470

FORD SUPER DUTY 2015 3.G Owners Manual Ford specification WSL-M2C192-A, partnumber F1TZ-19580-B, or equivalent. Addfriction modifier XL-3 (EST-M2C118-A) orequivalent for complete refill ofTraction-Lok rear axles. See Capacitiesand Specific