Downloaded from www.Manualslib.com manuals search engine KEYLESS STARTING
Failure to Start
If you are unable to start your vehicle, dothe following.
1.Hold the passive key next to the symbolon the steering column.
2.With the passive key in this position, youcan use the button to switch the ignitionon and start your vehicle.
DIESEL PARTICULATE FILTER
During regeneration at low speed or engineidle, you may smell a hot metallic odor andcould notice a clicking metallic sound. Thisis due to the high temperatures reachedduring regeneration and is normal.
HILL START ASSIST
The system makes it easier to pull awaywhen your vehicle is on a slope without theneed to use the parking brake.
When the system is active, your vehicle willremain stationary on the slope for two tothree seconds after you release the brakepedal. This allows you time to move yourfoot from the brake to the acceleratorpedal. The brakes are releasedautomatically once the engine hasdeveloped sufficient drive to prevent yourvehicle from rolling down the slope.
BRAKES
Emergency Brake Assist
Emergency brake assist detects when youbrake heavily by measuring the rate atwhich you press the brake pedal. It providesmaximum braking efficiency as long as youpress the pedal. Emergency brake assistcan reduce stopping distances in criticalsituations.
Anti-lock Brake System
This system helps you maintain steeringcontrol and vehicle stability duringemergency stops by keeping the brakesfrom locking.
CRUISE CONTROL
Cruise control lets you maintain a set speedwithout keeping your foot on theaccelerator pedal. You can use cruisecontrol when your vehicle speed is greaterthan 20 mph (30 km/h).
USING CRUISE CONTROL
Switching Cruise Control On
Setting a Speed
1.Accelerate to the desired speed.
2.Press and release SET+.
10Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing
Downloaded from www.Manualslib.com manuals search engine 3.Take your foot off the accelerator pedal.
The indicator will display in theinstrument cluster.
Changing the Set Speed
AccelerateA
DecelerateB
Canceling the Set Speed
Pull CAN toward you and release, or tapthe brake pedal.
Resuming the Set Speed
Pull RES toward you and release.
LANE KEEPING SYSTEM
Principle of Operation
The system will automatically detect andtrack the lane markings on the road. If yourvehicle unintentionally drifts toward theroad lane markings, a warning will be shownin the display. There is also a warning givenin the form of a vibration felt through thesteering wheel.
Lane Keeping Alert
Press the button twice to switch the systemon. Press the button again to switch thesystem off.
Setting the Steering Wheel VibrationLevel
The system has three intensity levels whichyou can set using the information display.
Setting the System Sensitivity
You can adjust how quickly the systemwarns you of a dangerous situation. Thesystem has two sensitivity levels which youcan set using the information display.
Lane Keeping Aid
Press the button three times to switch thesystem on. Press the button again to switchthe system off.
Setting the System Sensitivity
You can adjust how quickly the systemintervenes in a dangerous situation. Thesystem has two sensitivity levels which youcan set using the information display.
11Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing
