2015 FORD FOCUS torque

•2.0L GTDI EcoBoost I4 engine.
•Overboost function for increasedtorque.
•Electronic over-rev function with 6800RPM redline.
•ST-tuned 2.5 in (63.5 mm) center exitexhaust system.
•Getrag-Ford MMT6 6-speed manualtransaxle.
•Active sound symposer.
•Modified front suspension knuckle forimproved wheel end geometry.
•Cast rear knuckle (improved stiffness)and alternative anti-roll-bar mountingfor improved efficiency.
•ST-tuned springs and dampers.
•Increased diameter (13 in (335 mm))front brake rotors and unique caliperswith ST tuned pad formulation frontand rear.
•Enhanced torque vectoring control withcornering understeer control.
•ST-tuned electric power assistedsteering with torque steercompensation.
•AdvanceTrac® stability enhancementsystem with three modes: Normal,Sport and Disabled.
•20 in (45.7 cm) x 7.99 in (20.3 cm),2.17 in (55 mm) offset aluminum STwheels.
•P235/40-18 directional GoodyearEagle F1 summer only performancetires (standard).
5Focus (CDH), enUSA, First PrintingAt a GlanceE194501

DescriptionItem
4.0631.3213rd
4.0631.3214th
2.9551.1295th
2.9550.9436th
2.9554.600Reverse
Engine Specifications
DescriptionItem
Transversely mounted I4, cast aluminumcylinder block and cylinder headsConfiguration
3.4 in (87.5 mm) bore x 3.2717 in (83.1 mm)strokeBore x stroke
122 in³ (1,999 cm³)Displacement
9.3:1Compression ratio
252 hp @ 5500 RPM on 93 octaneHorsepower243 hp @ 5500 RPM on 87 octane
270 lb-ft @ 2500 RPM on 93 octaneTorque270 lb-ft @ 2500 RPM on 87 octane
6500 RPM continuousRedline6800 RPM three-second overspeed
126 horsepower per literSpecific output
Twin independent variable cam timingValvetrain
Coil-on-plugIgnition
150 bar fuel pumpFuel system
2.2 in (57 mm)Throttle body
Cast aluminumPistons
Cast ironCrankshaft
Forged steelConnecting rods
7Focus (CDH), enUSA, First PrintingAt a Glance

Enhanced Torque VectoringControl
Enhanced torque vectoring control iscomprised of two elements:
•Torque vectoring control, which appliesbrake torque on the inner wheel in acurve for better traction and lessundersteer.
•Cornering understeer control whichcontrols the yaw response of thevehicle under braking and accelerationon high and low friction surfaces.
Unlike electronic stability control,enhanced torque vectoring control doesnot slow the vehicle. It helps controlexcessive wheel slip and gives the vehiclecornering agility. The system only increasesperformance. Because of this, the systemdoes not disable enhanced torquevectoring control when the AdvanceTrac®system is off.
14Focus (CDH), enUSA, First PrintingStability Control

ENGINE OVERSPEED
Note:Always wait until the engine isproperly warmed up before running highengine speeds.
Your vehicle has an over-rev feature toincrease the performance range of yourFocus ST. The standard maximum enginespeed of 6500 RPM is indicated by anarrow red line on the tachometer face.The red line becomes thicker at theover-rev engine speed of 6800 RPM.
This feature allows three seconds ofover-rev above 6500 RPM. Once the threesecond limit has been reached, theelectronically controlled rev limit rampsdown to 6500 RPM and holds there. Oncethe engine speed has dropped below 6300RPM, the over-rev timer is reset and threeseconds of over-rev up to a maximum of6800 RPM is enabled.
Do not operate the engine at high RPM andlow load for sustained periods of time, asdamage may occur.
ENGINE OVERBOOST
Your ST vehicle offers a period ofadditional torque delivery referred to asoverboost or overtorque. This feature ofthe engine calibration broadens the RPMrange of the peak torque curve. This givesimproved performance during maneuverssuch as passing and vehicle launch.
Note:The overboost feature controls avariety of engine parameters to deliveradditional torque. Overboost is built into theengine calibration on your ST vehicle andno action is required by the driver to engage.
15Focus (CDH), enUSA, First PrintingDriving Hints

Please call the Ford Performance InfoCenter at 1-800-FORD-SVT (367-3788)for specific winter tire recommendations.
TECHNICAL SPECIFICATIONS
WHEELS
Wheel Specification
18 inches x 8.0 inchesDiameter and width
2.2 in (55 mm)Offset
6.7 in (16.949 cm)Backspacing
2.5 in (63.5 mm)Center bore
25 lb (11 kg)Weight
Your ST vehicle is equipped with unique wheels matched to the tires. These wheels aremore susceptible to damage due to their diameter, width and low profile tires. To avoiddamage to your wheels:
•Maintain proper tire pressure.
•Exercise caution when using automated, commercial car washes. Hand washing orusing touchless commercial car washes without mechanical tracks is the best wayto avoid potential damage.
•When installing wheels, always torque lug nuts to specification with a torque wrench.
•Inspect your wheels for damage on a regular basis. If a wheel is damaged, replace itimmediately.
•If you encounter an abnormally harsh impact, inspect the outer diameter of yourwheels, both inside and out, for damage.
Full Size Spare
Cooper Zeon RS3-ASpare tire
215/50R17Size
WSpeed rating
95Load rating
21Focus (CDH), enUSA, First PrintingWheels and Tires

A
About This Supplement.................................3At a Glance..........................................................5Engine Specifications............................................7Suspension Specifications.................................8Vehicle Specifications...........................................6
B
Base Warranty.................................................28
C
Capacities and Specifications..................26Capacities...............................................................26Specifications........................................................26
D
Driving Hints......................................................15
E
Engine Oil Dipstick..........................................18Engine Overboost...........................................15Engine Overspeed...........................................15Engine Specifications...................................23Drivebelt Routing..................................................23
I
Instrument Cluster...........................................9Introduction........................................................3
M
Maintenance......................................................17Manual Transmission......................................11Operating at High Speeds...................................11Recommended Shift Speeds for MaximumFuel Economy.....................................................11Using the Clutch.....................................................11Motorcraft Parts..............................................23
P
Product History..................................................4GLOBAL PERFORMANCE VEHICLES .............4TEAM RS HISTORY................................................4
R
Roadside Assistance.....................................16Roadside Emergencies.................................16
S
Stability Control...............................................13
T
Technical SpecificationsSee: Capacities and Specifications...............23Tires......................................................................19Optional All-Season Tires................................20Tire Pressure...........................................................19TiresSee: Wheels and Tires.........................................19Transmission Code Designation...............25Transmission......................................................11TransmissionSee: Transmission..................................................11
U
Under Hood Overview - 2.0LEcoBoost™.....................................................17Using Stability Control..................................13Enhanced Torque Vectoring Control..............14Using Winter Tires..........................................20
W
Warning Lamps and Indicators...................9Gauges........................................................................9Warranty Terms and Conditions..............28Wheels and Tires............................................19Technical Specifications.....................................21Winter TiresSee: Using Winter Tires......................................20
29Focus (CDH), enUSA, First PrintingIndex