Oil temperature gauge.A
Turbocharger boost gauge.B
Oil pressure gauge.C
Oil Temperature Gauge
Indicates the temperature of the engineoil.
If it enters the red section, the engine isoverheating. Reduce engine speed as soonas safely possible to allow the engine tocool. If the engine continues to be drivenat high engine speeds with the needle inthe red section, the engine speed reducesautomatically to prevent engine damage.
Turbocharger Boost Gauge
Indicates the added intake pressureprovided by the turbocharger.
Oil Pressure Gauge
Indicates engine oil pressure.
During normal driving, the indicated oilpressure varies with engine speed, thepressure rising as engine speed rises anddropping as engine speed drops.
If the engine oil pressure drops below thenormal range, the oil pressure gaugepointer drops into the red section of thegauge scale and the engine oil pressurewarning lamp in the main instrumentcluster illuminates. Stop the vehicle assoon as safely possible and switch off theengine immediately. Check the oil level andadd oil if needed.
10Focus (CDH), enUSA, First PrintingInstrument ClusterE180863
SpecificationName
WSS-M97B44-D2Engine coolant (Canada):Motorcraft Orange Antifreeze/Coolant PredilutedCVC-3DIL-B
WSS-M6C65-A2Brake fluid:Motorcraft DOT 4 Low Viscosity (LV) High Perform-ance Motor Vehicle Brake FluidPM-20
WSS-M2C200-D2Manual transmission fluid:Motorcraft Dual Clutch Transmission FluidXT-11-QDC
If you use oil and fluids that do not meetthe defined specification and viscositygrades this may lead to:
•Component damage which may not becovered by the vehicle Warranty.
•Longer engine cranking periods.
•Increased emission levels.
•Reduced engine performance.
•Reduced fuel economy.
•Degraded brake performance.
We recommend Motorcraft motor oil foryour vehicle. If Motorcraft oil is notavailable, use motor oils of therecommended viscosity grade that meetAPI SN requirements and display the APICertification Mark for gasoline engines. Donot use oil labeled with API SN servicecategory unless the label also displays theAPI certification mark.
An oil that displays this symbol conformsto current engine, emission system andfuel economy performance standards ofthe International Lubricant Standardizationand Approval Committee (ILSAC).
Do not use supplemental engine oiladditives because they are unnecessaryand could lead to engine damage that maynot be covered by your vehicle warranty.
Note:Ford recommends using DOT 4 LowViscosity (LV) High Performance Brake Fluidor equivalent meeting WSS-M6C65-A2. Useof any fluid other than the recommendedfluid may cause degraded brakeperformance and not meet the Fordperformance standards. Keep brake fluidclean and dry. Contamination with dirt,water, petroleum products or othermaterials may result in brake systemdamage and possible failure.
27Focus (CDH), enUSA, First PrintingCapacities and SpecificationsE142732
