USING STABILITY CONTROL
The AdvanceTrac® system includestraction control and electronic stabilitycontrol. See the Traction Control andStability Control chapters of the Owner'sManual for more information.
Never switch off stability control or selectsport mode when an emergency wheel orcompact wheel is fitted as spare wheel.
AdvanceTrac® provides three modes ofoperation specially calibrated for the FocusST. These are controlled through theAdvanceTrac® button on the centerconsole.
AdvanceTrac Modes
DisplayButton operationDescriptionMode
NoneNoneDaily usage with alldriver aids engaged.Normal
•Message centerdisplays: SportMode.
•Amber light incluster illumin-ates.
Single pressSpirited driving.Thresholds alteredon traction controland electronicstability control toallow more tire spinand vehicle slip.
Sport
Press and hold forfive secondsTrack Use Only.Traction control andelectronic stabilitycontrol are disabled.
Off•Message centerdisplays: Hold toswitch electronicstability controloff.
•ElectronicStability Controloff.
•Amber light incluster illumin-ates.
13Focus (CDH), enUSA, First PrintingStability ControlE194298
SpecificationName
WSS-M97B44-D2Engine coolant (Canada):Motorcraft Orange Antifreeze/Coolant PredilutedCVC-3DIL-B
WSS-M6C65-A2Brake fluid:Motorcraft DOT 4 Low Viscosity (LV) High Perform-ance Motor Vehicle Brake FluidPM-20
WSS-M2C200-D2Manual transmission fluid:Motorcraft Dual Clutch Transmission FluidXT-11-QDC
If you use oil and fluids that do not meetthe defined specification and viscositygrades this may lead to:
•Component damage which may not becovered by the vehicle Warranty.
•Longer engine cranking periods.
•Increased emission levels.
•Reduced engine performance.
•Reduced fuel economy.
•Degraded brake performance.
We recommend Motorcraft motor oil foryour vehicle. If Motorcraft oil is notavailable, use motor oils of therecommended viscosity grade that meetAPI SN requirements and display the APICertification Mark for gasoline engines. Donot use oil labeled with API SN servicecategory unless the label also displays theAPI certification mark.
An oil that displays this symbol conformsto current engine, emission system andfuel economy performance standards ofthe International Lubricant Standardizationand Approval Committee (ILSAC).
Do not use supplemental engine oiladditives because they are unnecessaryand could lead to engine damage that maynot be covered by your vehicle warranty.
Note:Ford recommends using DOT 4 LowViscosity (LV) High Performance Brake Fluidor equivalent meeting WSS-M6C65-A2. Useof any fluid other than the recommendedfluid may cause degraded brakeperformance and not meet the Fordperformance standards. Keep brake fluidclean and dry. Contamination with dirt,water, petroleum products or othermaterials may result in brake systemdamage and possible failure.
27Focus (CDH), enUSA, First PrintingCapacities and SpecificationsE142732
