2015 FORD F150 homelink

HomeLink Wireless Control
System (If Equipped)
WARNING
Do not use the system with any
garage door opener that does not
have the safety stop and reverse
feature as required by U.S. Federal Safety
Standards (this includes any garage door
opener manufactured before April 1, 1982).
A garage door opener which cannot detect
an object, signaling the door to stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features increases
the risk of serious injury or death. Note:
Make sure that the garage door and
security device are free from obstruction
when you are programming. Do not program
the system with the vehicle in the garage.
Note: Make sure you keep the original
remote control transmitter for use in other
vehicles as well as for future system
programming.
Note: We recommend that upon the sale
or lease termination of your vehicle, you
erase the programmed function buttons for
security reasons. See Erasing the Function
Button Codes
later in this section.
Note: You can program a maximum of
three devices. To change or replace any of
the three devices after initially programming
them, you must first erase the current
settings. See
Erasing the Function Button
Codes later in this section. The universal garage door opener replaces
the common hand-held garage door
opener with a three-button transmitter
integrated into the driver
’s sun visor.
The system includes two primary features,
a garage door opener and a platform for
remote activation of devices within the
home. You can program garage doors as
well as entry gate operators, security
systems, entry door locks and home or
office lighting.
You can find additional system information
online at www.homelink.com or by calling
the toll-free help line on 1-800-355-3515.
In-Vehicle Programming
This process is to program your hand-held
transmitter and your in-vehicle HomeLink
button.
Note: Put a new battery in the hand-held
transmitter. This helps ensure quicker
training and accurate transmission of the
radio-frequency signal.
151
F-150 (), enUSA, First Printing Universal Garage Door Opener
(If Equipped)E188211

1.
With your vehicle parked outside of the
garage, switch your ignition to the on
position, but do not start your vehicle.
2. Hold your hand-held garage door transmitter 1– 3 inches (2–8
centimeters) away from the HomeLink
button you want to program.
3. Using both hands simultaneously, press and hold the desired HomeLink
button and the hand-held transmitter
button. DO NOT release either one until
the HomeLink indicator light flashes
slowly and then rapidly. When the
indicator light flashes rapidly, release
both buttons. The rapid flashing
indicates successful training.
4. Press and hold the programmed HomeLink button for five seconds, then
release. You may need to do this twice
to activate the door. If your garage door
does not operate, watch the HomeLink
indicator light.
If the indicator light stays on, the
programming is complete. See
Programming Your Garage Door Motor
later in this section.
If the indicator light flashes rapidly for 2
seconds and then turns to a constant light,
the HomeLink button is not programmed
yet. Do the following: Press and hold the HomeLink button while
you press and release the hand-held
transmitter button every 2 seconds. The
HomeLink indicator light flashes slowly
and then rapidly once the HomeLink
function button recognizes and accepts
the hand-held transmitter
’s radio
frequency signal.
After programming the HomeLink button,
begin programming your garage door
opener motor.
Note: You may need a ladder to reach the
unit and you may need to remove the cover
or lamp lens on your garage door opener. To program additional buttons, repeat
Steps 1 – 4.
For questions or comments, please contact
HomeLink at www.homelink.com or
1-800-355-3515.
Programming Your Garage Door
Opener Motor
1. Press the learn button on the garage
door opener motor and then you have
30 seconds to complete the next two
steps.
2. Return to your vehicle.
152
F-150 (), enUSA, First Printing Universal Garage Door Opener
(If Equipped)E188212 E142659

3.
Press and hold the function button you
want to program for 2 seconds, then
release. Repeat this step. Depending
on your brand of garage door opener,
you may need to repeat this sequence
a third time.
Erasing the Function Button Codes
Note: You cannot erase individual buttons. 1. Press and hold the outer two function
buttons simultaneously for
approximately 20 seconds until the
indicator lights above the buttons flash
rapidly.
2. When the indicator lights flash, release
the buttons. You erased the codes for
all buttons.
Reprogramming a Single Button
To program a device to a previously trained
button, follow these steps: 1. Press and hold the desired button. Do
NOT release the button.
2. The indicator light begins to flash after
20 seconds. Without releasing the
button, follow Step 1 in the
Programming section.
For questions or comments, contact
HomeLink at www.homelink.com or
1-800-355-3515.
Programming to a Genie Intellicode 2
Garage Door Opener
Note: Make sure to program your Genie
Intellicode 2 transmitter with the garage
door opener before you program the
HomeLink buttons.
Note: To program HomeLink to the
transmitter you must first put the
transmitter into programming mode. Red indicator light.
A.
Green indicator light.
B.
1. Press and hold one of the buttons on the hand-held transmitter for 10
seconds. The indicator light changes
from green to red, and back to green
again.
2. Press the same button twice to confirm
the change to programming mode. If
done properly, the indicator light
appears red.
153
F-150 (), enUSA, First Printing Universal Garage Door Opener (If Equipped)E188212 E188213 BAE142661

3. Hold the transmitter within 1–
3 inches
(2 –8 centimeters) of the button on the
visor you want to program.
4. Press and hold both the programmed Genie button on the hand-held
transmitter and the button you want
to program. The indicator light on the
visor flashes rapidly when the
programming is successful.
Note: The Genie transmitter transmits for
up to 30 seconds. If HomeLink does not
program within 30 seconds, then you need
to press the Genie transmitter again. If the
Genie transmitter indicator light displays
green and red, release the button until the
indicator light turns off before pressing the
button again.
When you program HomeLink successfully,
you need to take the Genie transmitter out
of program mode. To do this:
1. Press and hold the previously programmed Genie button on the
hand-held transmitter for 10 seconds.
The indicator light change from a
steady red light to a red and green light.
2. Press the same button twice to confirm
the change. When the indicator light
turns green, you know you took your
Genie transmitter out of program
mode.
Programming HomeLink to the Genie
Intellicode Garage Door Opener Motor
Note: You may need a ladder to access the
garage door opener motor. 1. Press and hold the program button on
the garage door opener motor until
both blue indicator lights turn on.
2. Release the program button. Only the smaller, round indicator light should be
on.
3. Press and release the program button.
The larger purple indicator light flashes.
Note: You must complete the next two
steps within 30 seconds.
4. Press and release the Genie Intellicode
2 hand-held transmitter ’s previously
programmed button. Both indicator
lights on the garage door opener motor
unit should now flash purple.
5. Press and hold the previously programmed button on the visor for 2
seconds. Repeat this step up to 3 times
until the garage door moves.
Programming is now complete.
Clearing a HomeLink Device
To erase programming from the three
HomeLink buttons, press and hold the two
outer HomeLink buttons until the indicator
light begins to flash. When the indicator
light begins flashing in 10 to 20 seconds.
release both buttons. You erased the
programming. The indicator light should
blink slowly to indicate the device is in train
mode after you press any of the three
HomeLink buttons.
154
F-150 (), enUSA, First Printing Universal Garage Door Opener (If Equipped)E142662

T
Tailgate............................................................240
Bed Extender....................................................... 244
Bed Ramp............................................................. 246
BoxLink ™ Cleats................................................ 245
Box Side Step...................................................... 243
Electronic Tailgate Opening ........................... 241
Manual Tailgate Opening................................. 241
Tailgate Lock....................................................... 240
Tailgate Removal................................................ 241
Tailgate Step........................................................ 242
Technical Specifications See: Capacities and Specifications............359
Terrain Response........................................200
Principle of Operation..................................... 200
The Better Business Bureau (BBB) Auto Line Program (U.S. Only)
......................284
Tire Care..........................................................329
Glossary of Tire Terminology........................ 330
Information About Uniform Tire Quality Grading............................................................. 329
Information Contained on the Tire Sidewall............................................................. 331
Temperature A B C............................................ 330
Traction AA A B C.............................................. 330
Treadwear.............................................................329
Tire Pressure Monitoring System...........345 Changing Tires With a Tire Pressure
Monitoring System....................................... 346
Understanding Your Tire Pressure Monitoring System ...................................... 346
Tires See: Wheels and Tires...................................... 327
Towing a Trailer............................................250 Load Placement................................................ 250
Towing the Vehicle on Four Wheels
.........................................................269
Emergency Towing............................................ 269
Recreational Towing......................................... 269
Towing.............................................................250
Traction Control.............................................197 Principle of Operation....................................... 197
Trailer Sway Control
.....................................251
Transfer Case Fluid Check........................307
Transmission Code Designation............362
Transmission..................................................176 Transmission
See: Transmission............................................... 176
Transporting the Vehicle
..........................268
U
Under Hood Overview - 2.7L EcoBoost™.................................................298
2.7L EcoBoost..................................................... 298
Under Hood Overview - 3.5L Ecoboost™
.................................................299
Under Hood Overview - 3.5L..................300
Under Hood Overview - 5.0L...................301
Unique Driving Characteristics
................166
Universal Garage Door Opener................151 HomeLink Wireless Control System.............151
USB Port
..........................................................397
Using Adaptive Cruise Control.................214 Blocked Sensor.................................................... 219
Changing the Set Speed................................... 217
Detection Issues.................................................. 218
Disengaging the System................................... 217
Following a Vehicle............................................ 215
Hilly Condition Usage........................................ 218
Low Speed Automatic Cancellation...........218
Overriding the System....................................... 217
Resuming the Set Speed.................................. 217
Setting a Speed................................................... 215
Setting the Gap Distance................................ 216
Switching the System Off............................... 218
Switching the System On................................ 215
Switching to Normal Cruise Control...........220
System Not Available........................................ 219
Using Cruise Control....................................213 Switching Cruise Control Off.......................... 214
Switching Cruise Control On and Off..........213
Using Four-Wheel Drive.............................182 4WD Indicator Lights........................................ 182
Driving Off-Road With Truck and Utility Vehicles............................................................. 185
How Your Vehicle Differs From Other Vehicles............................................................. 185
Using the 2-Speed Automatic 4WD System............................................................... 183
Using the Electronic Shift on the Fly 4WD system................................................................ 182
Using Hill Descent Control......................200 Hill descent modes.......................................... 200
544
F-150 (), enUSA, First Printing Index