2015 FORD EXPEDITION seats

page 9*if equipped
14 FOUR-WHEEL DRIVE (4WD)*
operates in four modes for a variety of
road conditions:
2H (4X2) mode delivers power to the
rear wheels only, that is appropriate
for normal, on-road driving on dry
pavement and provides the best fuel
economy.
4A (4X4 AUTO) mode provides
electronic control four-wheel drive
with power delivered to all four
wheels, as required, for increased
traction. This mode is appropriate for
all on-road driving conditions, such as
dry road surfaces, wet pavement,
snow and gravel.
4H (4X4) mode provides electronically
locked four-wheel drive power to all
four wheels. This position is not
recommended for use on dry
pavement and is only intended for
severe winter or off-road conditions,
such as deep snow, ice or shallow sand.
4L (4X4) mode provides electronically
locked four-wheel drive when extra
power at reduced speeds is needed.
Use this mode for off-road, low-speed
operation, such as climbing steep
grades, pulling a boat out of the water
and more. Refer to the Four-Wheel Drive
(4WD) chapter in your Owner’s Manual.
15 HAZARD CONTROL
16 AUDIO SYSTEM CONTROLS
A. EJECT: Press to eject a CD.
B. CD SLOT: Insert a CD.
C. VOL and SYSTEM POWER: Press
to switch the system on and off.
Rotate the control to adjust
the volume.
D. PRESETS: Store your favorite radio
stations. To store a radio station, tune
to the station, then press and hold a
preset button until sound returns.
E. SEEK: Press
to access the
previous or next radio station, CD track
or preset satellite radio channel.
F. MEDIA: Press to access different
audio modes, such as AM, FM and
A/V Input.
G. TUNE: Turn the control to search
through the radio frequency
band manually.
17 CLIMATE CONTROLLED SEATS*

Press the heated or cooled
button repeatedly to cycle through the
highest setting to the lowest and off.
The left bank of buttons are for the
driver, while the right bank of buttons
are for the front passenger. More
indicator lights mean higher settings.
You can also use the controls in the
MyFord Touch touchscreen.
18 CLIMATE CONTROLS
A. FRONT FAN SPEED CONTROL:
Rotate to increase or decrease air flow.
B. DEFROST: Press to distribute air to
the windshield vents and de-mister.
C. A/C: Press to switch the air
conditioning system on and off.
D. MAX A/C: Press for
maximum cooling.
E. HEATED REAR WINDOW: Press to
switch on the rear defrost.
F. AIR DISTRIBUTION CONTROL:
Press to switch airflow from the
windshield, instrument panel, or
footwell vents on or off. The system
can distribute air through any
combination of these vents.
G. RECIRCULATED AIR CONTROL:
Press to switch between outside air
and recirculated air.
H. FAN SPEED –: Press to decrease
the volume of air circulated in
the vehicle.
I. AUTO: Press to switch on the
automatic temperature control.
J. FAN SPEED +: Press to increase the
volume of air circulated in the vehicle.
K. DUAL: Turn to increase or decrease
the air temperature on the passenger
side of the vehicle.

page 8
14
15
16
17
18
AB
C
D
EFE
G
A
BCD
EFG
HIJ
K
INSTRUMENT PANEL (CONTINUED)

SYNC® WITH MYFORD TOUCH®* (CONTINUED)COMFORT
SEATING-TO-CARGO VERSATILITY
Note: Before folding the second- or third-
row seats, make sure to flip down the head
restraints by pulling on the strap, and remove all
items from the floor and seats.
TO FOLD THE FLAT-FOLDING THIRD-ROW
SEATS TO THE LOAD FLOOR
Pull up on the Handle located behind the
seatback while pushing the seatback forward
and down into the seat cushion.
Note: You may need to exert a moderate force
to move the seat forward and down.
To return the seats to an upright
seating position
Lift and pull the seat rearward until the
latch engages fully.
Pull Strap
Handle
E-Z ENTRY INTO THE
THIRD-ROW SEATS
The E-Z entry seat allows for easier
entry and exit to and from the
third-row seat.
To enter the third-row seating area
1. Fold the head restraint forward.
2. Pull up on Lever 1.
3. Fold down the second-row seat
and release the handle.
4. Pull the handle up again until the
seat releases from the floor.
5. Push the seat upward and fold it
away from the third row.
To return the seat to an upright
seating position
1. Push the seat down and latch it to
the floor.
2. Bring the seatback to an upright
position. It should lock into position.
3. Lift up on the head restraint until it
locks into its original position.

Lever 1
Position 2
Position 3
page 15 page 14*if equipped
CLIMATE
SYNC with MyFord Touch controls the
temperature, airflow direction, fan speed
and other climate features like climate
controlled front seats* and rear climate
control* for you and your passengers.
To use voice commands to operate
climate, say a voice command like “Climate
temperature 72 degrees” and MyFord
Touch will make that adjustment.
SET YOUR MYTEMP
• Touch the lower-right blue corner on
the touchscreen.
• Set your exact, desired temperature
using the (+) or (–) buttons.
• Press and hold the MyTemp button
until the background color goes solid.
ACCESS YOUR REAR CLIMATE CONTROL*
Press the Climate corner of the touchscreen
and then touch the Rear button on the
lower-right corner to activate the rear
climate control. Adjust rear temperature
and fan speed from the touchscreen or
give second-row passengers access to their
independent control.
ENTERTAINMENT
No matter how you store your music, SYNC
makes it yours to enjoy when you’re behind
the wheel. Just press the lower-left red
corner of the touchscreen. From here, you
can easily go between AM/FM, SiriusXM
and other media sources.
SET YOUR RADIO PRESETS
• Touch the lower-left corner
on the touchscreen.
• Touch FM.
• Touch Direct Tune.
• Enter the desired station
and touch Enter.
• Touch Presets and then touch
and hold one of the memory preset
buttons to save it. The sound mutes
and then returns after it saves
the station.
BRING IN YOUR OWN MUSIC
Gain access to any audio source by voice
and even control how each operates, like
changing radio stations, CD tracks or music
on one of the following devices:
• CD
• USB
• Bluetooth
® streaming
• Audio line in
Refer to the MyFord Touch chapter in
your Owner’s Manual, visit the website
or call the toll-free number for more
information. See the inside front cover
of this guide for details.

COMFORT (CONTINUED)
AMBIENT LIGHTING*
When activated, ambient lighting illuminates key areas of your
interior with a choice of colors.
To access and make adjustments
1. Press the Settings icon > Vehicle > Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To turn the feature on or off, press the power button.
REAR HEATED SEATS*
Press the heated seat control repeatedly to cycle through the
settings and off. More lights indicate a higher setting.
MEMORY FEATURE*
The memory function saves and recalls the positions of the driver
seat, power mirrors and adjustable pedals. Use the memory
controls located on the left side of the driver’s seat
to
program and then recall memory positions.
To program
1. Switch on the ignition.
2. Move the memory features to your desired position.
3. Press and hold the 1 button
until you hear a tone.
Use this same procedure to set the second position using the
2 button
.
You can now use these controls to recall the set
memory positions.
COMFORT (CONTINUED)
POWERFOLD® THIRD-ROW SEAT*
The 60/40 split-folding bench seat uses
a power-activated seatback release. Fold
one side or both down for more flexibility.
The controls are located on the right-hand
rear quarter trim panel that is accessible
from the liftgate area.
Note: Make sure you unfasten all of the
safety belts.
To lower
1. Make sure you fold the head restraints
down first.
2. Press and hold the FOLD control.
Release the control once the seats
fold completely.
3. To return the seatback to its original
position, press and hold the UP control.
Release the control once the seats return
to the upright position. Note: The power-folding seats operate for
10 minutes after you switch the ignition off.
The transmission must be in park (P) and
the liftgate or liftgate glass must be open.
LEATHER CLEANING
For cleaning and removing spots and
stains, use Motorcraft® Premium Leather
and Vinyl Cleaner** or a commercially
available leather cleaning product for
automotive interiors.
Note: Test any cleaning product on an
inconspicuous area first.
Do not use the following products as these
may damage the leather:
• Oil and petroleum or silicone-based
leather conditioners.
• Household cleaners.
• Alcohol solutions.
• Solvents or cleaners intended
specifically for rubber, vinyl
and plastics.
For complete information, see the Vehicle
Care chapter of your Owner’s Manual.
MOONROOF*
The moonroof control is on the overhead
console. It has a one-touch open and
close feature. To stop its motion during the
one-touch operation, press the control a
second time.
To open, press and release the SLIDE
control. It stops short of the fully opened
position to help reduce wind noise. Press
the SLIDE control again to fully open the
moonroof. To close, pull and release the
SLIDE control.
To vent, press and release the TILT control.
Pull and hold the TILT control to close
the moonroof.
Once you close the moonroof, you can still
open or close the sliding shade manually.
Pull the shade toward the front of the
vehicle to close it.
page 17 page 16*if equipped
**Do not use on the King Ranch seats. See the Vehicle Care Owner’s Manual for details. *if equipped