2015 FORD E SERIES warning

[x] Cancel search: warning

Page 74 of 360

FORD E SERIES 2015 4.G Owners Manual Solid illumination after the engine is started indicates the on-board
diagnostics system (OBD-II) has detected a malfunction. Refer to
On-board diagnostics (OBD-II)in theFuel and Refuelingchapter.
If

Page 75 of 360

FORD E SERIES 2015 4.G Owners Manual GENERAL INFORMATION
WARNING:Driving while distracted can result in loss of vehicle
control, crash and injury. We strongly recommend that you use
extreme caution when using any device that may take you

Page 80 of 360

FORD E SERIES 2015 4.G Owners Manual INFORMATION MESSAGES
Press the SELECT/RESET stem to acknowledge and remove some
messages from the information display. Other messages will be removed
automatically after a short time. Certain messages

Page 81 of 360

FORD E SERIES 2015 4.G Owners Manual Maintenance
MessagesAction / Description
ENGINE OIL
CHANGE SOONDisplayed when the engine oil life remaining is
between 5% and 0%.
OIL CHANGE
REQUIREDDisplayed when the oil life left reaches 0%.
OIL LI

Page 87 of 360

FORD E SERIES 2015 4.G Owners Manual SITTING IN THE CORRECT POSITION
WARNING:Sitting improperly out of position or with the
seatback reclined too far can take off weight from the seat
cushion and affect the passenger sensing system, resu

Page 88 of 360

FORD E SERIES 2015 4.G Owners Manual •Bend your legs slightly so that you can press the pedals fully.
•Position the shoulder strap of the safety belt over the center of your
shoulder and position the lap strap tightly across your hip

Page 89 of 360

FORD E SERIES 2015 4.G Owners Manual Moving the Seats Backward
and Forward (If Equipped)
Recline Adjustment
(If Equipped)
WARNING:Before returning the seatback to its original position,
make sure that cargo or any objects are not trapped

Page 90 of 360

FORD E SERIES 2015 4.G Owners Manual POWER SEATS
WARNING:Do not adjust the driver seat while the vehicle is
moving. This may result in sudden seat movement, causing loss
of control of your vehicle.
The control is located on the outboard