•A maximum of 2,000 contact names with six numbers
per contact will be downloaded and updated every
time a phone is connected to the Uconnect® Phone.
•Depending on the maximum number of entries down-
loaded, there may be a short delay before the latest
downloaded names can be used. Until then, if avail-
able, the previously downloaded phonebook is avail-
able for use.
•Only the phonebook of the currently connected mobile
phone is accessible.
•Only the mobile phones phonebook is downloaded.
SIM card phonebook is not part of the Mobile
phonebook.
•This downloaded phonebook cannot be edited or
deleted on the Uconnect® Phone. These can only be
edited on the mobile phone. The changes are trans-
ferred and updated to Uconnect® Phone on the next
phone connection.
Making A Phone Call
1. Push the PHONE button on the steering wheel.
2. After the BEEP, say “dial” (or “call” a full name or
phone number).
Receiving A Call — Accept (And End)
1. When an incoming call rings or is announced on
Uconnect®, push the PHONE button on the faceplate.
2. To end a call, push the PHONE button on steering
wheel or the PHONE button on the faceplate.
Mute (Or Unmute) Microphone During Call
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say “mute” (or “mute off.”)
4
Uconnect® PHONE 29
Auto-On Comfort — If Equipped
When this feature is selected, the driver’s heated and/or
ventilated seats and heated steering wheel (if equipped)
are activated based on the outside temp. To make your
selection, press the “Off”, “Remote Start”, or “All Starts”
buttons on the touchscreen. (All Starts is functional with
remote start or key start.) Press the “Back Arrow” button
on the touchscreen to return to the previous screen.
Doors & Locks — If Equipped
Refer to “Understanding Your Instrument
Panel/Uconnect® System” section in your vehicle Own-
er ’s Manual for details.
Heated Seats — If Equipped
Refer to “Understanding The Features Of Your Vehicle/
Seats” section in your vehicle Owner ’s Manual for de-
tails.
Engine Off Options
When this feature is selected, the driver can choose to
have the headlights remain on for 0, 30, 60, or 90 seconds
when exiting the vehicle. To change the Headlight Off
Delay status, select from “0 sec.,” ”30 sec.,” “60 sec.,” or
“90 sec.” buttons on the touchscreen to select your
desired time interval. Press the “Back Arrow” button on
the touchscreen to return to the previous menu.
44 SETTINGS MAIN MENU
