2015 DODGE CHARGER SRT buttons

IDENTIFYING YOUR RADIO
Uconnect® 5.0 w/Integrated Center Stack
Uconnect® 5.0 w/o Integrated Center Stack
Key Features:
•5” Touchscreen
•Three buttons on either side of the display
•Hands-free/Bluetooth®
•SiriusXM Satellite Radio (If Equipped)
4 IDENTIFYING YOUR RADIO

Uconnect® 5.0 System With Integrated Center
Stack
1 — RADIO
Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM and SXM (if
equipped), can be selected by pressing the corresponding
buttons on the touchscreen in Radio Mode.
2 — COMPASS
Push the COMPASS button on the faceplate to display
the current direction of the vehicle.
3 — CLIMATE
Push the Climate button on the faceplate to access the
Climate Controls.
4 — + MORE
Push the + MORE button on the faceplate to access
additional options.
1
IDENTIFYING YOUR RADIO 5

Uconnect® 5.0 System w/o Integrated Center
Stack
1 — RADIO
Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM and SXM (if
equipped), can be selected by pressing the corresponding
buttons on the touchscreen in Radio Mode.
2 — COMPASS
Push the COMPASS button on the faceplate to display
the current direction of the vehicle.
3 — SETTINGS
Push the SETTINGS button on the faceplate to display
the customer programmable features.
4 — + MORE
Push the + MORE button on the faceplate to access
additional options.
1
IDENTIFYING YOUR RADIO 7

Fast Seek Up
Press and hold the “Seek Up”button on the touch-
screen to advance the radio through the available
stations or channels at a faster rate, the radio stops at
the next available station or channel when the button
on the touchscreen is released.
Seek Down
Press and release the “Seek Down”button on the
touchscreen to tune the radio to the next listenable
station or channel.
During a Seek Down function, if the radio reaches the
starting station after passing through the entire band two
times, the radio will stop at the station where it began.
Fast Seek Down
Press and hold the “Seek Down”button on the
touchscreen to advance the radio through the avail-
able stations or channel at a faster rate, the radio stops
at the next available station or channel when the
button on the touchscreen is released.
Setting Presets
The Presets are available for all Radio Modes, and are
activated by pressing any of the four “Preset” buttons on
the touchscreen, located at the top of the screen.
When you are receiving a station that you wish to
commit into memory, press and hold the desired num-
bered button on the touchscreen for more that two
seconds or until you hear a confirmation beep.
The Radio stores up to 12 presets in each of the Radio modes.
Four presets are visible at the top of the radio screen.
2
RADIO MODE 11

3. The Audio Menu shows the following options for you
to customize your audio settings:
•Equalizer— Press the “Equalizer” button on the
touchscreen to adjust the Bass, Mid and Treble.
Use the “+” or “–” buttons on the touchscreen to
adjust the equalizer to your desired settings.
Press the “Back Arrow” button on the touch-
screen when done.
•Balance/Fade— Press the “Balance/Fade” button
on the touchscreen to adjust the sound from the
speakers. Use the “arrow” button on the touch-
screen to adjust the sound level from the front
and rear or right and left side speakers. Press the
Center “C” button on the touchscreen to reset
the balance and fade to the factory setting. Press
the “Back Arrow” button on the touchscreen
when done.
•Speed Adjustable— Press the “Speed Adjusted
Volume” button on the touchscreen to select
between OFF, 1, 2 or 3. This will decrease the
radio volume relative to a decrease in vehicle
speed. Press the “Back Arrow” button on the
touchscreen when done.
•Loudness— Press the “Loudness” button on the
touchscreen to select the Loudness feature.
When this feature is activated it improves sound
quality at lower volumes.
14 RADIO MODE

Uconnect® VOICE RECOGNITION
Introducing Uconnect®
Start using Uconnect® Voice Recognition with these
helpful quick tips. It provides the key Voice Commands
and tips you need to know to control your Uconnect® 5.0
system.
Key Features:
•5” touchscreen
•Three buttons on either side of the display
32 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

Get Started
1. VisitUconnectPhone.comto check mobile device and
feature compatibility and to find phone pairing in-
structions.
2. Reduce background noise. Wind and passenger con-
versations are examples of noise that may impact
recognition.
3. Speak clearly at a normal pace and volume while
facing straight ahead. The microphone is positioned
on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first
push either the VR or PHONE button, wait untilafter
the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts
by pushing the VR or PHONE button and saying a
Voice Command from current category.
All you need to control your Uconnect® system with
your voice are the buttons on your steering wheel.
1—PushToBeginRadioOrMediaFunctions2 — Push To Initiate, Answer, Or End A Phone Call, Send Or Re-ceive A Text
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 33

SETTINGS MAIN MENU
Push the SETTINGS button on your faceplate, if one
exists, to display the Settings Main Menu. If not, push the
+ MORE button on the faceplate then the “Settings”
button on your touchscreen. The Settings Main Menu
contains the following options:
Display
Press the “Display” button on the touchscreen.
Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, press and re-
lease “Auto” or “Manual” buttons and then select
“Done.”
Language
When in this display, you may select one of three
languages for all display nomenclature. Press “Lan-
guage” on the touchscreen. Press the “Back Arrow”
button on the touchscreen to return to the previous
menu.
Units
When in this display, you may choose between US and
Metric units of measure to be displayed in the EVIC.
Press “US” or “Metric.” Press the “Back Arrow” button
on the touchscreen to return to the previous menu.
Voice Resp. Length — If Equipped
When in this display, you may change the Voice Re-
sponse Length settings. To change the Voice Response
Length, press the “Brief” or “Detailed” button on the
touchscreen. Press the “Back Arrow” button on the
touchscreen to return to the previous menu.
42 SETTINGS MAIN MENU