2015 DODGE CHARGER SRT radio

Eject Button — Ejecting a Disc
Push the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
A Disc can be ejected with the radio and ignition OFF.
USB/iPod® Mode
USB/iPod® Mode is entered by either inserting a USB
Jump Drive or iPod® cable into the USB port, or by
pushing the MEDIA button located on the faceplate.
Once in Media Mode, press the “Source” button on the
touchscreen and select “USB/iPod.”
Inserting USB/iPod® Device
Gently insert the USB/iPod® device into the USB Port. If
you insert a USB/iPod® device with the ignition ON, the
unit will switch to USB/iPod® mode and begin to play
when you insert the device. The display will show the
track number and index time in minutes and seconds.
Play will begin at the start of track 1.
Browse
Press the “Browse” button on the touchscreen to select
Artist, Albums, Genres, Songs, Playlists or Folders from
the USB/iPod® device. Once the desired selection is
made you can chose from the available media by pressing
the button on the touchscreen. Press the “Exit” button on
the touchscreen if you wish to cancel the browse func-
tion.
3
MEDIA MODE 21

AUX Mode
AUX Mode is entered by inserting a AUX device using a
stereo cable with a 3.5 mm audio jack into the AUX port,
or by pushing the MEDIA button located on the face-
plate. Once in Media Mode, press the “Source” button on
the touchscreen and select “AUX.”
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
Port. If you insert a Auxiliary device with the ignition
ON, the unit will switch to AUX mode and begin to play
when you insert the device cable.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting play-
lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME/MUTE rotary knob, or with the
volume of the attached device.
The vehicle radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore if the volume
control on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the
music on the device.
22 MEDIA MODE

Transfer Ongoing Call Between Handset And
Vehicle
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say “transfer call.”
Changing The Volume
1. Start a dialogue by pushing the PHONE button on the
faceplate, then adjust the volume during a normal call.
2. Use the radio ON/VOLUME rotary knob to adjust the
volume to a comfortable level while the Uconnect®
system is speaking. Please note the volume setting for
Uconnect® phone is different than the audio system
volume setting.
30 Uconnect® PHONE

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS
CONTENTS
!Uconnect® VOICE RECOGNITION. . . . . . . . . . .32
▫Introducing Uconnect®. . . . . . . . . . . . . . . . . .32
▫Get Started. . . . . . . . . . . . . . . . . . . . . . . . . . .33
▫Basic Voice Commands. . . . . . . . . . . . . . . . . .34
▫Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
▫Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
▫Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
▫Voice Text Reply. . . . . . . . . . . . . . . . . . . . . . .38
▫Additional Information. . . . . . . . . . . . . . . . . .395

Get Started
1. VisitUconnectPhone.comto check mobile device and
feature compatibility and to find phone pairing in-
structions.
2. Reduce background noise. Wind and passenger con-
versations are examples of noise that may impact
recognition.
3. Speak clearly at a normal pace and volume while
facing straight ahead. The microphone is positioned
on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first
push either the VR or PHONE button, wait untilafter
the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts
by pushing the VR or PHONE button and saying a
Voice Command from current category.
All you need to control your Uconnect® system with
your voice are the buttons on your steering wheel.
1—PushToBeginRadioOrMediaFunctions2 — Push To Initiate, Answer, Or End A Phone Call, Send Or Re-ceive A Text
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 33

Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect® system.
Push the VR button. After the beep, say#
•Cancelto stop a current voice session
•Helpto hear a list of suggested Voice Commands
•Repeatto listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch-
screen.1 — Push To Initiate Or To Answer A Phone Call, Send Or Re-ceive A Text2—PushToBeginRadioOrMediaFunctions3—PushToEndCall
34 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

Radio
Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio® stations you would like to hear. (Sub-
scription or included SiriusXM Satellite Radio trial re-
quired.)
Push the VR button. After the beep, say#
•Tune toninety-five-point-five FM
•Tune toSatellite Channel Hits 15
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 35

PRE-DEFINED VOICE TEXT REPLY RESPONSES
Okay. Where are you? I will be ber> minutes
late.Call me. Are you there
yet?
I’ll call you
later.
I need direc-
tions.
See you in
of
minutes.I’m on my way. Can’t talk right
now.I’m lost. Thanks.
TIP:Your mobile phone must have the full implementa-
tion of theMessage Access Profile (MAP)to take advan-
tage of this feature. For details about MAP, visit
UconnectPhone.com. Apple iPhone® iOS6 or later sup-
ports reading incoming text messages only.
Additional Information
© 2014 Chrysler Group LLC. All rights reserved. Mopar®
and Uconnect® are registered trademarks and Mopar
Owner Connect is a trademark of Chrysler Group LLC.
Android is a trademark of Google Inc. SiriusXM and all
related marks and logos are trademarks of SiriusXM
Radio Inc. Yelp, Yelp logo, Yelp burst and related marks
are registered trademarks of Yelp®.
DriveUconnect.com
Uconnect® System Support 1-877-855-8400
Mon. – Fri., 7:00 am – 12:00 am, ET
Sat., 8:00 am – 10:00 pm, ET
Sun., 9:00 am – 5:00 pm, ET
Uconnect® Access Services Support 1-855-792-4241.
Please have your Uconnect® Security PIN ready when
you call.
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 39