2015 Citroen DS3 clutch

DS3_en_Chap04_conduite_ed01-2015
F Apply  the   parking   brake.
F  W ith   a   manual   gearbox:   place   the   lever   in  
n

eutral   and   fully   depress   the   clutch   pedal.
F
 
W
ith   an   electronic   gearbox:   place   the   lever  
a

t position n  and   press   the   brake   pedal  
f

i r m l y.
F
 
W
ith   an   automatic   gearbox:   place   the   lever  
a

t position P   and   press   the   brake   pedal  
f

i r m l y.
F
 
I
nsert   the   key   in   the   ignition   switch;   the  
s

ystem   recognises   the   code.
F
 
U
nlock   the   steering   column   by  
s

imultaneously   turning   the   steering   and   the  
k

ey.
Starting the engine
In some circumstances, you may have to   apply   some   force   to   turn   the   steering  
w

heel   (wheels   on   lock   for   example).In
  wintry   conditions,   the   warning   lamp  
w

ill   stay   on   longer.   When   the   engine   is  
h

ot,   it   does   not   come   on.In   temperate   conditions,   do   not  
w

arm   the   engine   up   with   the   vehicle  
s

tationary,   but   move   off   straight   away  
a

nd   drive   at   moderate   engine   speeds.
If   the   engine   does   not   start   straight  a
way,   switch   the   ignition   off.   Wait   a  
f

ew   moments   before   trying   again.   If  
t

he   engine   does   not   start   after   a   few  
a

ttempts,   do   not   keep   trying:   you   risk  
d

amaging   the   starter   motor   and   the  
e

ngine.   Call   on   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.Never
  leave   the   engine   running   in  
a

n   enclosed   area   without   adequate  
v

entilation:
 in
ternal
 c
ombustion
 e

ngines   emit   toxic   exhaust   gases,  
s

uch   as   carbon   monoxide.   Danger   of  
i

ntoxication   and   death.   In   very   severe  
w

inter   conditions   (temperatures  b
elow -23°C),   it   is   necessary   to   allow  t
he   engine   to   run   for   4   minutes   before  
s

etting   off,   in   order   to   ensure   the  
c

orrect operation and durability of
the
  mechanical   components   of   your  
v

ehicle,   the   engine   and   gearbox.
F
 
W
ith   a   petrol   engine,   operate   the   starter  
m

otor   by   turning   the   key   to   position   3 until
the
  engine   starts,   without   pressing   the  
a

ccelerator   pedal.   Once   the   engine   starts,  
r

elease   the   key.
F
 
W
ith   a   Diesel   engine,   turn   the   key   to  
p

osition 2 ,
  ignition   on,   to   operate   the  
eng

ine
 p
reheating
 s
ystem. Wait
  until   this   warning   lamp   goes   off
 i

n   the   instrument   panel,   then   operate
 t

he   starter   motor   by   turning   the   key   to
 p

osition
3
 
until   the   engine   starts,   without
 p

ressing   the   accelerator   pedal.   Once
 t

he   engine   starts,   release   the   key.

105
DS3_en_Chap04_conduite_ed01-2015
6-speed manual gearbox
F Move  the   lever   fully   to   the   right   to  enga
ge 5th or 6th ge a r.
Engaging 5th or 6th gear
As a safety precaution and to facilitate
starting  of   the   engine:
-

a
lways select neutral,
-
 
p
ress   the   clutch   pedal.
Only engage reverse gear when the vehicle   is   stationary   with   the   engine   at   idle.
Engaging reverse gear
F Raise  the   ring   under   the   knob   and   move  t
he   gear   lever   to   the   left   then   for wards.
Failure
 
to
 
follow
 
this
 
advice
 
may
 
cause
 
p

ermanent
 
damage
 
to
 
the
 
gearbox
 
(

engagement
 o

f
 3rd or 4th gear by m
i st a ke).
driving

107
DS3_en_Chap04_conduite_ed01-2015
display in the instrument panel
n. Neutral
R. R everse
1 2 3 4 5 / 6.
  Gears   in   manual   mode.
AUTO.
 

 
T
his   comes   on   when   automated   mode  
i

s   selected.   It   goes   off   when   changing  
t

o   manual   mode.
Moving off
F Select position n.
F  P ress   the   brake   pedal   fully.
F
 
S
tart   the   engine.
n

  appears   in   the   instrument   panel.
If
  the   engine   does   not   start:
-
If
n
  is   flashing   in   the   instrument  
p

anel,   move   the   gear   selector   to  
p

osition A, then to position
n
.F

 S elect   automated   mode   (position   A
), m
anual   mode   (position   M)   or   reverse  
(

position
 R)
AU

TO and 1 , 1 or R appear in the
instrument
 pan

el.
F
 
R
elease   the   parking   brake.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
Depending
  on   the   type   of   electronic  
g

earbox,   the   vehicle   may   move   off   on  
i

ts   own.
For
  more   information,   refer   to   the  
"

Creep   function"   section.
Do
  not   press   the   brake   and   clutch  
p

edals   simultaneously.   This   can   cause  
r

apid   clutch   wear.
F
 
A
ccelerate   away.
-
 
I
f   this   warning   lamp  
c

omes   on,   accompanied  
b

y   an   audible   signal   and  
t

he  
d
isplay  
o
f  
a
 
m
essage,  
p

ress   firmly   on   the   brake  
ped

al.
driving

DS3_en_Chap04_conduite_ed01-2015
Creep function
(depending on equipment)
This function allows the vehicle to be
manoeuvred  more   easily   at   low   speeds   (when  
p

arking,   in   traffic   jams...).
With
  the   gear   selector   in   position   A, M or R ,
the vehicle moves as soon as you take your
foot off the brake pedal , at low speed and
with
  the   engine   at   idle.
Automated mode
AUTO and   the   gear   engaged   appear  i
n   the   instrument   panel.
The
 
gearbox   then   operates   in   auto-adaptive  
m

ode,
 
without   any   action   on   the   part   of   the  
d

river.
 
It
 
continuously   selects   the   most   suitable  
g

ear
 
taking   account   of:
-
 
o

ptimisation   of   fuel   consumption,
-
 
d

riving   style,
-

r

oad conditions,
-
 
v

ehicle   load.
For
 
optimum   acceleration,   when   overtaking  
a

nother
 
vehicle   for   example,   press   the  
a

ccelerator pedal fully down, beyond the point
of
 
resistance. You
  can   change   mode   at   any   time   by  
m

oving   the   gear   selector   from   A to M or
the
  other   way   round.
The
 
creep
 
function
 
may
 
be
 
temporarily
 
u

navailable
 
if
 
the
 
clutch
 
temperature
 
is
 
t

oo
 
high
 
or
 
the
 
slope
 
too
 
steep.
Do not leave children unsupervised
inside
 
the
 
vehicle
 
when
 
the
 
engine
 
is
 
r

unning. F

Sel

ect position A
.
Never   select   neutral   (position  n
)
  when  
m

oving.
Temporary control of gear
changing
You can temporarily take over control of gear c hanges   using   the   steering   mounted   "+" and
"-"
control
  paddles:   if   the   engine   speed   allows,   the
 g

ear   change   is   carried   out.
This function allows you to anticipate certain
situations
 
s
uch  
a
s  
ov
ertaking  
a
nother  
v
ehicle  
o
r  
a

pproaching   a   bend.
After
  a   few   moments   without   any   action   on   the  
p

addles,   the   gearbox   resumes   control   of   gear  
c

hanging
 a
utomatically.

DS3_en_Chap04_conduite_ed01-2015
Stop & StartThe Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Per fect
  for   urban   use,   the   Stop   &   Start   system   reduces   fuel   consumption   and   exhaust   emissions   as   well   as   the   noise   level   when   stationary.
Operation
going into engine STOP mode
For your comfort, during parking manoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   key.
The "ECO" 
warning
 
lamp
 
comes
 o
n
 
in
 
the
 
instrument
 
panel
 
and
 
the
 
e

ngine
 
goes
 
into
 
standby:
-

w

ith a manual gearbox , at speeds below
12
 
mph
 
(20
 
km/h),
 
when
 
you
 
put
 
the
 
gear
 
l

ever into neutral, and you release the
clutch
 
pedal.
-

w

ith a 5 or 6-speed electronic gearbox ,
when
 
stationary
 
or
 
at
 
speeds
 
below
 
5
 
mph
 
(

8
 
km/h)
 
(depending
 
on
 
version),
 
when
 
y

ou
 
press
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear
 
s

elector in position
n
.
A

 
time
 
counter
 
calculates
 
the
 
sum
 o

f
 
the
 
periods
 
in
 
STOP
 
mode
 
during
 a

 
journey.
 
It
 
rests
 
itself
 
to
 
zero
 
every
 t

ime
 
the
 
ignition
 
is
 
switched
 
on
 
with
 t

he
 
key. STOP
  mode   is   not   invoked   when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   key,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
Special cases: STOP mode not
available
The "ECO" warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.

11 7
DS3_en_Chap04_conduite_ed01-2015
going into engine START mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts:
-

w

ith a manual gearbox , when you
depress the clutch pedal,
-

w

ith a 5-speed or 6-speed electronic
gearbox :
●
 
g

ear   selector   in   position   A or M, when
you
  release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position  n and the
brake
  pedal   released,   when   you   move  
t

he
  gear   selector   to   position   A or M,
●
 
o

r
 
when   you   engage   reverse   gear.
Special cases: START invoked
automatically
If the system has been deactivated in   STOP   mode,   the   engine   restarts  
i

mmediately.
At
 
any   time,   press   the   "ECO OFF" switch to
deactivate   the   system.
This
 
is   confirmed   by   the   switch   warning   lamp  
c

oming   on   accompanied   by   a   message   in   the  
sc

reen.
deactivation
For reasons of safety and for your comfort, S
TART   mode   is   invoked   automatically   when:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   7   mph  
(

11 km/h)   with   the   electronic   gearbox  
s

ystem,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
The "ECO"
 

warning   lamp   flashes   for  
a

  few   seconds,   then   goes   off.
This operation is perfectly normal.
With
 
a
 
manual
 
gearbox
 
in
 
STOP
 
m

ode,
 
if
 
you
 
engage
 
a
 
gear
 
without
 
f

ully
 
depressing
 
the
 
clutch
 
pedal,
 
a
 
m

essage
 
is
 
displayed
 
asking
 
you
 
to
 
f

ully depress the clutch pedal so that
the
 
engine
 
can
 
restart.
driving

DS3_en_Chap04_conduite_ed01-2015
Cruise control
System which automatically maintains the speed   of   the   vehicle   at   the   value   programmed  
b

y the driver, without any action on the
accelerator
 ped

al.
The cruise control is switched on
 m

anually:
 it r

equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   on   a   manual   gearbox,
-
 
s
econd   gear   on   a   or   automatic   or   electronic  
g

earbox,   in   sequential   mode,
-
position A
  on   an   electronic   gearbox   or  
p

osition d  on   an   automatic   gearbox.
The cruise control is switched off
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value. The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A.
1.
 C

ruise   control   mode   selection   thumb   wheel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 C

ruise   control   off/resume   button.Steering mounted controls
The cruise control cannot, in any
circumstances,  replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  programmed   information   is   grouped  
t

ogether   in   the   instrument   panel   screen.
5.
  C
ruise   control   off/resume   indication.
6.
  C
ruise   control   mode   selection   indication.
7.
  P
rogrammed   speed   value.
displays in the instrument panel

Operation
When your vehicle is too close to or
approaches  the   vehicle   ahead   too   quickly   the  
s

ystem   automatically   applies   the   brakes   to  
a

void   a   collision.
The
  collision   can   be   avoided   automatically   if   the
 d

ifference in speed between your vehicle and the
vehicle
  ahead   does   not   exceed   9   mph   (15   km/h).
Above
  this   threshold,   the   system   will   do   what
 i

s possible to avoid or reduce the accident by
lowering
  the   speed   of   impact.
The
  automatic   braking   may   bring   the   vehicle   to  
a

  complete   stop   if   the   situation   requires   it.
In this case, the vehicle is held stationary
temporarily
  (for   about   1.5   seconds)   to   allow  
t

he   driver   to   take   back   control   by   pressing   the  
b

rake
 ped
al.
You are then alerted by the display of a
message.
The
  brake   lamps   on   your   vehicle   come   on   to  
w

arn   other   road   users.
After
  an   impact,   the   system   is  
a

utomatically   put   out   of   service:   it   no  
lon

ger
 ope
rates.
You
  must   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   to   have   the   system  
m

ade   operational   again.
During
  automatic   braking,   the   driver  
c

an   always   obtain   a   higher   rate   of  
d

eceleration than that controlled by the
system,
  by   pressing   firmly   on   the   brake  
ped

al.
The
  triggering   of   the   system   may   cause  
t

he   engine   to   stall,   unless   the   driver  
d

epresses   the   clutch   pedal   quickly  
e

nough   during   automatic   braking.
deactivation
The system is deactivated in the vehicle configuration   menu,   accessible   with   the   ignition   on.
Its
  state   is   memorised   when   the   ignition   is
 s

witched off.
When the system is deactivated, a m essage   is   displayed   every   time   the  
i

gnition   is   switched   on,   to   warn   you.