2015 CITROEN DS3 CABRIO radio

04
343
AUdIO
Press the SoURCE button several
times   in   succession   and   select   the  
radio.
Press the

band
a
ST button to select
a
  waveband:   FM1,   FM2,   FMast,  
AM.
Briefly

  press   one   of   the   buttons   to  
carry

  out   an   automatic   search   of   the  
radio

  stations.
Press one of the buttons to carry out
a
  manual   search   up   /   down   for   radio  
frequencies.
Press the LIST

REFRESH button to
display
  the   list   of   stations   received  
locally

  (30   stations   maximum).
To
  update   this   list,   press   for   more  
than

  two   seconds. The
 
external
 
enviro
nment  
(hills,
 
build
ings,  
tunnels,
 
basement
 
car
 
parks,
  ...)  
may

  block   reception,   including   in   RDS   mode.  
This
  is   a   normal   effect   of   the  
way

  in   which   radio   waves   are   transmitted   and   does   not   indicate   any   failure  
of

  the   audio   system.
RdS
RadioSelecting a station
Press   the   MENU   button.
Select
a

U d I o FU n CTI on S then
press
  OK.
Select the FM W
aVE

band
PREFERE
n CES function then press
OK.
Select
a

CTIV
aTE R
d S then press
OK.
  RDS   appears   on   the   screen.
In
  radio   mode,   press   OK   directly   to   activate   /   deactivate   RDS  
mode.
The RDS, if  displayed,  enables  you  to  continue  listening  to  the  same  station  by automatic
  retuning   to   alternative   frequencies.   However,   in   certain   conditions, coverage

  of   an   RDS   station   may   not   be   assured   throughout   the   country   as
 radio

  stations   do   not   cover   100   %   of   the   territory.   Under   conditions   of   very
 weak

  reception,   the   system   may   change   to   a   regional   station.

04AUdIO
Insert circular compact discs only.
Some   anti-pirating   systems,   on   original   discs   or   CDs   copied   using   a  
personal

  recorder,   may   cause   faults   which   are   no   reflection   on   the  
quality

  of   the   vehicle's   player.
Without
  pressing   the   EJECT
 
button,   insert   a   CD   in   the   player,   play  
begins

  automatically.
Cd
Playing
a C d
To play a disc which has already been inserted,  press   the   SOURCE   button  
several

  times   in   succession   and  
select

  CD.
Press one of the buttons to select a
track
  on   the   CD.
Press
 
the
 
LIST
 
REFRESH   button   to   display   the   list   of   tracks   on   the  
CD.Press

  and   hold   one   of   the   buttons   for  
fast

  forwards   or   fast   backwards.
Receiving TA messages
Press the Ta button to activate or
deactivate   traffic   messages.
The
 
T

A
 

(Traffic  
Announcement)
  function   gives   priority   to  
T
A
 
alert  
messages.

 
T
o   operate,   this   function   needs   good   reception   of   a  
radio

 
station
  transmitting   this   type   of   message.   When   a   traffic  
report

 
is
 
transmitted,   the   current   audio   source   (Radio,   CD,   ...)   is  
interrupted

 
automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

 
the
 
audio
  source   resumes   at   the   end   of   the   transmission   of   the  
message.

07SCREEN MENU MAP(S)
Radio-Cd
* The  settings   vary   according   to   vehicle.
REG mode
C
d repeat
Shuffle play
Vehicle config*
R wiper in rev
Options
Guide lighting
d
iagnostic
R d S options
View
Abandon
1
2
3
3
1
2
2
2
2
1
2
2
Screen A
MAIN FUNCTION
Option A1
o
ption a 11
Option A
Option B...1
2
3
1

07SCREEN MENU MAP(S)
activate / deactivate RdS
activate / deactivate REG mode
activate / deactivate radiotext
RAdIO
activate / deactivate Intro
Cd / MP3 Cd
activate / deactivate track repeat
(the entire current C d for C d , the entire
current folder for MP3 C
d )
activate / deactivate random play
(the
entire current C d for C d , the entire
current folder for MP3 C
d )activate / deactivate track repeat (of the
current folder / artist / genre / playlist)
USB
activate / deactivate random play (of the
current folder / artist / genre / playlist)
1
1
1
1
1
1
1
1
Screen CPress the OK dial for access to short-cut menus according to
  the   display   on   the   screen:

07
355
SCREEN MENU MAP(S)
Audio functions
Alternative frequencies (RDS)
activate   /   deactivate
FM preferences
Regional   mode   (REG)
activate
  /   deactivate
Radio-text
  information   (RDTXT)
activate
  /   deactivate
1
2
3
4
3
4
3
4
Play modesAlbum   repeat   (RPT)
activate
  /   deactivate
Track
  random   play   (RDM)
activate
  /   deactivate2
3
4
3
4
Trip computer
Distance: x miles
Enter distance to destination
Diagnostics
Alert log
Systems
  activated   or   deactivated
State of systems
*
1
2
3
3
2
3
2
* The  settings   vary   according   to   vehicle.
Screen CPressing the MENU button displays:

357
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
There
 
is   a   difference   in  
sound

 
quality   between  
the

 
different   audio  
sources

  (radio,   CD...). For
  optimum   sound   quality,   the   audio   settings   (Volume,   Bass,  
T
reble,  
Ambience,

  Loudness)   can   be   adapted   to   the   different   sound   sources,  
which

  may   result   in   audible   differences   when   changing   source   (radio,  
CD...).Check

  that   the   audio   settings   (Volume,   Bass,  
T

reble,  
Ambience,
  Loudness)   are   adapted   to  
the

  sources   listened   to.   It   is   advisable   to   set  
the

 
AUDIO
  functions   (Bass,  
T
reble,   Front-Rear  
Balance,

  Left-Right   Balance)   to   the   middle  
position,

  select   the   musical   ambience   "None"   and  
set

  the   loudness   correction   to   the   "Active"   position  
in

  CD   mode   or   to   the   "Inactive"   position   in   radio  
mode.
The

 
CD   is   ejected  
automatically

  or   is   not  
played

  by   the   player. The
  CD   is   inserted   upside   down,   is   unplayable,   does   not   contain   any  
audio

  data   or   contains   an   audio   format   which   the   player   cannot   play.
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   equipment. -
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 
Check
  the   content   in   the   case   of   a   recorded  
CD:

  consult   the   advice   in   the   "Audio"   section.
-
 
The
  audio   equipment's   CD   player   does   not  
play

  DVDs.
-
 
Due
  to   their   quality   level,   certain   writeable  
CDs

  will   not   be   played   by   the   audio   system.
The
 
message   "USB  
peripheral error" is
displayed

  on   the   screen.
The
b
luetooth connection
is
 
cut. The
  battery   of   the   peripheral   may   not   be   sufficiently   charged.Recharge
  the   battery   of   the   peripheral   device.
The
  USB   memory   stick   is   not   recognised.
The
  memory   stick   may   be   corrupt. Reformat
  the   memory   stick.

FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
I
 
am
 
unable   to   access   my  
voicemail. Few

  telephones   or   service   providers   allow   the   use   of   this   function.
The
 
CD   player   sound   is  
poor

. The
  CD   used   is   scratched   or   of   poor   quality.Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   equipment   settings   (bass,   treble,   ambiences)   are   unsuitable. Set   the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.
The
 
stored   stations   do  
not

 
function   (no   sound,  
87.5

 
Mhz   is   displayed...). An
  incorrect   waveband   is   selected. Press the
band
a
ST button to return to the
waveband
  (AM,   FM1,   FM2,   FMAST)   on   which   the  
stations

  are   stored.
The
 
traffic   announcement  
(T

A)
 
is
  displayed.   I   do  
not

 
receive   any   traffic  
information. The

  radio   station   is   not   part   of   the   regional   traffic   information   network. Tune   to   a   radio   station   which   broadcasts   traffic  
information.
The quality of reception
of

 
the
 
radio   station  
listened

  to   gradually  
deteriorates

  or   the   stored  
stations

  do   not   function  
(no

 
sound,   87.5   Mhz   is  
displayed...). The

  vehicle   is   too   far   from   the   transmitter   used   by   the   station   listened  
to

  or   there   is   no   transmitter   in   the   geographical   area   through   which   the  
vehicle

  is   travelling. Activate
  the   RDS   function   to   enable   the   system  
to

  check   whether   there   is   a   more   powerful  
transmitter

  in   the   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)   block  
reception,

  including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not   indicate  
a

  failure   of   the   audio   equipment.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
through

  a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.

359
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
Sound
  cut-outs   of   1   to  
2

 
seconds   in   radio   mode.During
  this   brief   sound   cut-out,   the   RDS   searches   for   any   frequency  
permitting

  better   reception   of   the   station.Deactivate
  the   RDS   function   if   the   phenomenon   is  
too

  frequent   and   always   on   the   same   route.
With
 
the   engine   off,  
the

 
audio   equipment  
switches of

f after a few
minutes
  of   use. When
  the   engine   is   switched   off,   the   audio   equipment   operating   time  
depends

  on   the   battery   charge.
The
  switch-off   is   normal:   the   audio   equipment   switches   to   economy   mode  
and

  switches   off   to   prevent   discharging   of   the   vehicle's   battery.Start
  the   vehicle's   engine   to   increase   the   battery  
charge.
The

 
message   "the   audio  
system

  is   overheated"  
appears

  on   the   display. In
  order   to   protect   the   installation   if   the   surrounding   temperature   is   too  
high,

  the   audio   equipment   switches   to   an   automatic   thermal   protection  
mode

  leading   to   a   reduction   of   the   volume   or   stopping   of   the   playing   of  
the

  CD. Switch
  the   audio   system   off   for   a   few   minutes   to  
allow

  the   system   to   cool.