2015 CITROEN DS3 CABRIO key

205
Important: if your vehicle's
AdBlue® tank is completely empty - w
hich
 
is
  confirmed   by   the   alert  
m

essages   and   the   impossibility   of  
s

tarting
 
the   engine,   you   must   add   at  
l

east
 
3.8   litres   (so   two   1.89   litre   bottles).If
  any   additive   is   split   or   splashed,   wash  
i

mmediately   with   cold   water   or   wipe  
w

ith   a   damp   cloth.
If   the   additive   has   crystallised,   clean   it  
o

ff   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up after
a breakdown because of a lack of
additive ,   signalled   by   the   message   "Top
 u

p   emissions   additive:   Starting   prevented",
 y

ou   must   wait   around   5   minutes   before
 s

witching  
o
n  
t
he  
i
gnition,  
w
ithout opening
the driver's door, locking the vehicle
or introducing the key into the ignition
switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
F
 
O

btain
 
a
 
bottle   of   AdBlue
®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank. N ever   dispose   of   AdBlue
® additive b
ottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 
purpose
 
or
 
take
 
them
  to   your  
d

ealer.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth.
F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 
it
 
a


6
th of a turn clockwise, to its stop.
F
 R
efit   the   black   cap   and   turn   it   a   quarter   of  
a

 
turn   clockwise   without   pressing.   Ensure  
t

hat
  the   indicator   on   the   cap   lines   up   with  
t

he
 
indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel   and/or   the   storage   box   to   the   bottom  
o

f
 
the   boot.
F
 
R

efit   the   boot   carpet   and   close   the   tailgate.
Practical information

241
F On  the   front   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
P
lace   the   gear   lever   in   neutral   (position   N
for
  an   electronic   or   automatic   gearbox). F
 O n   the   rear   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Towing your vehicleTowing another vehicle
Failure to observe this special condition c
ould   result   in   damage   to   certain  
c

omponents   (braking,   transmission...)  
a

nd   the   absence   of   braking   assistance  
t

he   next   time   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key   one  
n

otch   in   the   ignition   switch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Practical information

06USING THE TELEPHONE
Press PHONE twice.
Select " d ial"   then   confirm. Select "
d irectory of contacts" then
confirm.
Dial
  the   telephone   number   using   the  
virtual

  keypad   selecting   each   number  
in

  turn.
Confirm
  "OK"   to   make   the   call. Press TEL or twice on PHONE.
Calling a new number
Calling a contact
Select   the   desired   contact   and   confirm.
If access was via the PHONE button,
select "Call"
  and   confirm.
Select
  the   number   and   confirm   to   start  
the

  call.
Making a callUse of the telephone is not recommended while driving. We recommended  that   you   park   safely   or   make   use   of   the   steering  
mounted

  controls.

06
315
Options during a call*
During a call, press the MOd E button
several   times   to   select   display   of   the  
telephone screen, then press "OK

" to
open
  the   contextual   menu.
Select "Private mode"
  and   confirm   to  
take

  the   call   on   the   handset.
o

r select "Hands-free mode"   and  
confirm

  to   take   the   call   via   the   vehicle's  
speakers.
Select "

Put call on hold "
  and   confirm   to  
put

  the   current   call   on   hold.
o

r select "Resume the call"   and  
confirm

  to   resume   the   call   on   hold. Select "
d TMF ring tones
" to use the
numerical   keypad,   so   as   to   navigate  through
  the   menu   of   an   interactive   vocal  
server

.
Select "Hang up"
  to   end   the   call.
*
  Depending   on   the   compatibility   of   the   phone   and   your   service   plan.
it
  is   possible   to   hold   a   3-way   conference  
call

  by   making   2   calls   in   succession*.  
Select "

Conference mode call" in the
contextual
  menu   accessible   using   this  
button.
Or

  make   a   short   press   on   this   button.
USING THE TELEPHONE

07
319
Press
 
the
 
button
 
on
 
the
 
numerical
 
keypad
 
to
 
recall
 
a
 
preset

 
station.
Or
 
press
 
then
 
turn
 
the
 
thumb
 
wheel
 
at
 
the
 
steering
 
mounted

 
controls.
Presetting a station
After selecting a station, press one of the buttons on   the   numerical   keypad   for   2   seconds   to   preset   the  
current

  station.
An
  audible   signal   confirms   that   the   station   has   been  
preset. Press

RA d IO.
Activate / d
eactivate R d S
RDS, if activated, allows you to continue listening to the same station
  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   entire   country   as   radio   stations   do   not  
cover

  100   %   of   the   territory.  
This
  explains   the   loss   of   reception   of  
the

  station   during   a   journey.
Select "Guidance options " then
confirm.
Activate
  or   deactivate   "R d S" then
confirm.
RAdIO

08
321
Cd, MP3 Cd / USB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32   Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   .m3u...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   greater   than   32   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In

  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet   standard.
If
  the   disc   is   recorded   in   another   format   (udf, ...),   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.Information and advice
The
  system   supports   USB   mass   storage   or   iPod  
devices

  via   the   USB   port   (suitable   cable   not   supplied).
If
  a   partitioned   USB   memory   key   is   connected   to   the  
system,

  only   the   first   partition   is   recognised.
Control
  of   the   peripheral   device   is   with   the   audio  
system

  controls.
The
  number   of   tracks   is   limited   to   2000   maximum,  

999

  tracks   per   folder.
If
  the   current   consumption   at   the   USB   port   exceeds  
500

  mA,   the   system   goes   into   protection   mode   and  
deactivates

  the   port.
Other
  peripherals,   not   recognised   on   connection,   must  
be

  connected   to   the   auxiliary   socket   using   a   Jack   cable  
(not

  supplied).
Give
  preference   to   multimedia   USB   memory   sticks   (in   general  
formatted

  FAT
 
32   File  
Allocation
 
T
able).
The
  system   does   not   support   the   operation   of   an  
Apple® player and a USB
 
memory
 
stick
 
connected
 
at
 
the
 
same
 
time.
It
 
is
 
recommended
 
that
 
official
 
Apple® USB cables are used to ensure correct
 
operation.
MUSIC MEdIA PLAYERS

06
349
BLUETOOTH FUNCTIONS
For safety reasons and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   of   the   Bluetooth  
mobile

  telephone   with   the   Bluetooth   hands-free   system   of   your  
audio

  equipment   must   be   carried   out   with   the   vehicle   stationary  
and

  the   ignition   on.
Press
  the   MENU   button.
A
 

window   is   displayed   with   a   message   that   a   search   is   in   progress.
a
ctivate the telephone's b luetooth function
and
  ensure   that   it   is   "visible   to   all"   (telephone  
configuration).In

  the   menu,   select:
-
 
Bluetooth
  telephone   function   -  
Audio
-

 
Bluetooth
  configuration
-
 
Perform
  a   Bluetooth   searchThe
  services   offered   depend   on   the   network,   the   SIM   card   and   the  
compatibility

  of   the   Bluetooth   equipment   used.
Consult   your   telephone's   manual   and   your   operator   to   find   out   which  
services

  are   available   to   you.
Bluetooth telephoneScreen C
The  
TELEPHONE
  menu   permits   access   to   the   following   functions  
in

  particular:   Directory*,   Call   list,   Pairing   management.
The
  first   4   telephones   recognised   are   displayed   in   this   window.
A
 

virtual   keypad   is   displayed   in   the   screen:
 enter

  a   code   with   at   least   4   digits.
Confirm
  by   pressing   OK.
A
 

message   that   the   pairing   has   been   successful   appears   in  
the screen. Select
  the   telephone   to   be   connected   from   the   list.   Only   one  
telephone

  can   be   connected   at   a   time.
A
 

message   is   displayed   in   the   screen   of   the  
telephone

  chosen.  
T
o   accept   the   pairing,   enter   the  
same

  code   on   the   telephone,   then   confirm   with   OK.
The
  automatic   connection   authorised   is   only   active   after  
the telephone

  has   been   configured.
The
  directory   and   the   call   list   can   be   accessed   after  
the synchronisation

  period.
(Available according to model and version)
*
  If   your   telephone   is   fully   compatible.
If
  pairing   fails,   the   number   of   attempts   is   not   limited.
Go
  to   www.citroen.co.uk   for   more   information   (compatibility,   more  
help,

  ...).
Pairing a telephone / First connection

06
Receiving a callAn   incoming   call   is   announced   by   a   ring   and   a   superimposed  
display

  in   the   vehicle's   screen.
Select
  the  
YES
  tab   on   the   display  
using

  the   buttons   and   confirm   by  
pressing

  OK.
Press
  this   button   to   accept   the   call. Making a call
From   the   Bluetooth   telephone   function  
Audio
  menu,   select   Manage  
the

  telephone   call   then   Call,   Call   list   or   Directory.
Press
  this   button   for   more   than   two   seconds   for  
access

  to   your   directory,   then   navigate   with   the  
thumb

  wheel.
o

r
To
  dial   a   number,   use   your   telephone's   keypad,  
with

  the   vehicle   stationary.
BLUETOOTH FUNCTIONS
The system accesses the telephone's contacts directory, depending on  compatibility,   and   while   the   Bluetooth   connection   with   it   is  
maintained.
With

  certain   telephones   connected   by   Bluetooth   you   can   send   a  
contact

  to   the   directory   of   the   audio   system.
Contacts
  imported   in   this   way   are   saved   in   a   permanent   directory  
visible

  to   all,   whatever   the   telephone   connected.
The
  menu   for   the   directory   is   not   accessible   if   it   is   empty.