2015 CITROEN DS3 CABRIO DAG battery

27
DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lamps
When the engine is running or the vehicle is being   driven,   the   illumination   of   one   of   the  
f

ollowing   warning   lamps   indicates   a   fault   which  
r

equires   action   on   the   part   of   the   driver.Any
  fault   resulting   in   the   illumination   of   a   warning   lamp   must   be   investigated   further   by  r
eading   the   associated   message   in   the   multifunction   screen.
If
  you   encounter   any   problems,   do   not   hesitate   to   contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Warning lamp is on
cau

seAction / Observations
STOP fixed,
  alone   or
 a

ssociated with
another
 w

arning
 lam
p,
 a

ccompanied   by   an
 a

udible   signal   and   a
 m

essage   on   the   screen.Illumination
  of   the   warning   lamp   is  
a

ssociated   with   a   serious   braking  
s

ystem   or   engine   coolant   temperature  
pro

blem.Stop
  as   soon   as   it   is   safe   to   do   so   as   the   engine   may  
c

ut   out   when   driving.
Park,
  switch   off   the   ignition   and   call   a   CITROËN   dealer  
o

r   a   qualified   workshop.
Service temporarily. Minor
  problems   have   occurred   for  
w

hich   there   is   no   specific   warning  
lam

p.Identify
  the   problem   by   reading   the   message   shown   in  
t

he   screen,   such   as,   for   example:
-
 
t
he   engine   oil   level,
-

t
he screenwash level,
-
 
t
he   remote   control   battery,
-
 
s
aturation   of   the   particle   emission   filter   on   Diesel  
v

ehicles   (see   the   "Checks   -   Particle   emissions  
f

ilter"   section).
For any other faults, contact a CITR
oË

N dealer or a
qualified
 w

orkshop.
fixed. Major
  problems   have   occurred   for  
w

hich   there   is   no   specific   warning  
lam

p.Identify
  the   problem   by   reading   the   message   shown  
i

n the screen and contact a CITR
oË
N dealer or a
qualified
 w

orkshop.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
Engine oil
pressure fixed.
There
  is   a   fault   with   the   engine  
l

ubrication   system.You
  must   stop   as   soon   it   is   safe   to   do   so.
Park,
  switch   off   the   ignition   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Battery charge fixed. The
  battery   charging   circuit   has   a   fault  
(

dirty   or   loose   terminals,   slack   or   cut  
a

lternator   belt,   ...).The
  warning   lamp   should   go   off   when   the   engine   is  
s

tarted.
If
  it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
d

oor(s) open fixed
  if   the   speed   is  
b

elow   6   mph   (10   km/h).A
  door   or   the   boot   is   still   open. Close   the   door   or   boot.
fixed
  and   accompanied  
b

y   an   audible   signal   if  
t

he speed is above
6
  mph   (10   km/h).

DS3_en_Chap01_controle-de-marche_ed01-2014
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the trip distance recorder
zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the display indicates "=0" , release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any t
ime.
F

P
ress the trip distance recorder zero reset
button.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.

DS3_en_Chap03_ouvertures_ed01-2014
Following disconnection of the vehicle battery, replacement   of   the   remote   control   battery   or  
i

n   the   event   of   a   remote   control   malfunction,  
y

ou   can   no   longer   unlock,   lock   or   locate  
y

our vehicle.
F
 
F
irst   of   all,   use   the   key   in   the   lock   to   unlock  
o

r   lock   your   vehicle.
F
 
T
hen,   reinitialise   the   remote   control.
If
  the   problem   persists,   contact   a   CITROËN  
d

ealer   as   soon   as   possible.
Remote control problem
Reinitialisation
F Switch  off   the   ignition.
F  T urn   the   key   to   position   2 (Ignition).
F
 
P
ress   the   closed   padlock   immediately   for   a  
f

ew   seconds.
F
 
S
witch   off   the   ignition   and   remove   the   key  
f

rom   the   ignition   switch.
The
  remote   control   is   fully   operational   again.
changing the battery
Battery ref.: CR1620 / 3 volts.F  U nclip   the   casing   by   inserting   a   coin   at   the  
n

otch   and   rotating.
F
 
S
lide   the   flat   battery   out   of   its   location.
F

S
lide the new battery into its location
observing
  the   original   direction.
F
 
C
lip   the   casing   in   place,   then   the   chrome  
f

inisher.
F
 
R
einitialise   the   remote   control.
If the battery is flat, you are
informed
  by   lighting   of   this   warning  
l

amp   in   the   instrument   panel,   an   audible   signal  
a

nd   a   message   in   the   multifunction   screen.
F
 
U
nfold   the   key.
F
 
R
elease   the   chrome   finisher   by   pressing  
on
  lug   A.
F
 
M
aintain   pressure   on   lug   A   and   remove   the  
c

hrome   finisher   by   sliding   it   off   at   45°.

DS3_en_Chap03_ouvertures_ed01-2014
Activation
F Press button A  for   more   than   two   seconds.
A   confirmation   message   appears   on   the  
m

ultifunction   screen,   accompanied   by   an  
a

udible
 s
ignal.
deactivation
F Press button A   again   for   more   than  
two   seconds.
A
  confirmation   message   appears   on   the  
m

ultifunction   screen,   accompanied   by   an  
a

udible
 s
ignal. To
  lock   or   unlock   the   doors   mechanically   in   the  
e

vent   of   a   central   locking   system   failure   or   flat  
b

attery.
Emergency control
Locking the driver's door
F Insert
  the   key   in   the   lock,   then   turn   it   to   the  r
ight.
Unlocking the driver's door
F Insert   the   key   in   the   lock,   then   turn   it   to  t
he left.
Locking the passenger's door
F Remove   the   black   cap,   on   the   edge   of   the  d
oor,   using   the   key.
F
 
I
nsert   the   key   in   the   cavity,   then   turn   it   fully.
F
 
R
emove   the   key   and   refit   the   cap.
Unlocking the passenger's door
F Pull  the   interior   door   opening   control.
In the event of a fault with the central
locking
 
system,
 
you
 
must
 
disconnect
 
t

he
 
battery
 
to
 
lock
 
the
 
boot
 
and
 
s

o
 
ensure
 
the
 
complete
 
locking
 
of
 
t

he vehicle.
Driving
 
with
 
the
 
doors
 
locked
 
may
 m
ake
 
access
 
more
 
difficult
 
for
 
the
 
em

ergency
 ser

vices
 i

n
 a

n
 em

ergency.

71
DS3_en_Chap03_ouvertures_ed01-2014
boot
Opening
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   press   the  
o

pening   control   and   raise   the   tailgate.
closing
F Lower  the   tailgate   using   the   interior   grab  han
dle.
If
  the   tailgate   is   not   closed   correctly:
-

when the engine is running , this
warning   lamp   comes   on,   accompanied b

y   a   message   on   the   multifunction
 s

creen for a few seconds,
- when the vehicle is moving (speed above 6   mph   (10   km/h)),   this   warning   lamp   comes  
o

n,   accompanied   by   an   audible   signal   and  
a

  message   on   the   multifunction   screen   for  
a

  few   seconds. System
  for   mechanical   unlocking   of   the   boot  
i

n   the   event   of   a   battery   or   central   locking  
m

alfunction.
Tailgate release
Unlocking
F Fold  back   the   rear   benchseat   to   gain  a
ccess   to   the   lock   from   inside   the   boot.
F
 
I
nsert   a   small   screwdriver   into   hole   A of the
lock
  to   unlock   the   tailgate.
Access

DS3_en_Chap06_conduite_ed01-2014
Operating fault
With the ignition on, if this warning lamp   comes   on   and   AUTO flashes,
accompanied
  by   an   audible   signal   and   a  
m

essage
 
in
  the   multifunction   screen,   this  
i

ndicates
 
a
 
gearbox   fault.
Have
 
it
 
checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w

orkshop.
Reinitialisation
(5-speed electronic
gearbox)
In exceptional circumstances, the g earbox   may   need   an   automatic  
r

einitialisation:   starting   and   gear  
c

hanging   are   no   longer   possible.
AUTO and - - appear in the
instrument
 pan

el.
AUTO and - -   appear   in   the   instrument   panel.
F Select position N.
F  P ress   the   brake   pedal.
F

W
ait for around 30 seconds until N or a
gear
  appears   in   the   instrument   panel.
F
 
M
ove   the   gear   lever   to   position   A, then to
position N .
F
 
W
ith   your   foot   still   on   the   brake   pedal,   start  
t

he
 eng
ine.
The
  gearbox   is   operational   again.
Following
  disconnection   of   the   battery,   it   is  
n

ecessary   to   reinitialise   the   gearbox.
F  
S
witch   on   the   ignition.
Follow   the   procedure   described   above.

DS3_en_Chap06_conduite_ed01-2014
There is a risk of damage to the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
g

ear   lever   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at
 a

  prolonged   standstill   with   the   engine
 r

unning   (traffic   jam...),   put   the   gear   lever   in
 t

he N
 

position   and   apply   the   parking   brake.
If the lever is not in position P
,
when the driver's door is opened or
approximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the lever to position P ;
 
the
 
m

essage
 d

isappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from   N to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact a CITR
oË

N dealer or a qualified
workshop
 
as   soon   as   possible.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
four
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or N 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to
 i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.