2015 CITROEN DS3 CABRIO DAG USB port

08
317
DS3_en_Chap13b_RT6-2-8_ed01-2014
cd, MP3 cd / USB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32   Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   .m3u...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   greater   than   32   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In

  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet   standard.
If
  the   disc   is   recorded   in   another   format   (udf, ...),   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.Information and advice
The
  system   supports   USB   mass   storage   or   iPod  
devices

  via   the   USB   port   (suitable   cable   not   supplied).
If
  a   partitioned   USB   memory   key   is   connected   to   the  
system,

  only   the   first   partition   is   recognised.
Control of the peripheral device is with the audio
system
  controls.
The
  number   of   tracks   is   limited   to   2000   maximum,  

999

  tracks   per   folder.
If
  the   current   consumption   at   the   USB   port   exceeds  
500

  mA,   the   system   goes   into   protection   mode   and  
deactivates

  the   port.
Other
  peripherals,   not   recognised   on   connection,   must  
be

  connected   to   the   auxiliary   socket   using   a   Jack   cable  
(not

  supplied).
Give
  preference   to   multimedia   USB   memory   sticks   (in   general  
formatted

  FAT
 
32   File  
Allocation
 
T
able).
The
  system   does   not   support   the   operation   of   an  
Apple® player and a
USB
 
memory
 
stick
 
connected
 
at
 
the
 
same
 
time.
It
 
is
 
recommended
 
that
 
official
 
Apple® USb cables are used to ensure
correct
 
operation.
MUSIc MEdIA PLAYERS

08
DS3_en_Chap13b_RT6-2-8_ed01-2014
Insert the CD in the player, insert the USb
memory   stick   in   the   USB   player   or   connect   the  
USB

  peripheral   to   the   USB   port   using   a   suitable  
cable

  (not   supplied).
The
  system   builds   playlists   (in   temporary  
memory),

  an   operation   which   can   take   from  
a

  few   seconds   to   several   minutes   at   the   first  
connection.
Reduce

  the   number   of   non-music   files   and   the  
number

  of   folders   to   reduce   the   waiting   time.
The
  playlists   are   updated   every   time   the   ignition  
is

  switched   off   or   connection   of   a   USB   memory  
stick.

  However,   the   system   memorises   these  
lists

  and   if   they   are   not   modified,   the   loading  
time

  will   be   shorter.
Play
  starts   automatically   after   a   period   which  
depends

  on   the   capacity   of   the   USB   memory  
stick. Selection of source
The
SOUR c E   button   on   the   steering   mounted   controls   allows   a  direct
  change   to   the   next   media   source.
" cd / cd MP3"
"USB, iPod "
"AUX"
"STREAMING"
"RA
d IO"
Press MUSI
c to display the "ME d IA"
menu.
Select "Following media source " and
confirm.
Repeat
  the   operation   as   many   times   as   necessary   to   obtain   the  
desired

  media   source   (except   for   radio   which   is   accessible   either  
with

SOUR c E or RA d IO).
Sources
MUSIc MEdIA
PLAYERS

08
DS3_en_Chap13b_RT6-2-8_ed01-2014
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's  speakers.
Connect
  the   telephone:   see   "USING THE TELEPHONE ".
Select "Audio" or "All"
  profile.
If
  play   does   not   start   automatically,   it   may   be   necessary   to   start   the  
audio

  playback   from   the   telephone.
Control
  is   from   the   peripheral   device   or   by   using   the   audio   system  
buttons.
Once

  connected   in   streaming   mode,   the   telephone   is   considered   to   be
 a

  media   source.
It
  is   recommended   that   you   activate   "Repeat" on the b luetooth
peripheral.
MUSIc MEdIA PLAYERS
connecting APPLE® players
Connect the apple® player to the USB port using a suitable cable (not
 
supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The
 
classifications
 
available   are   those   of   the   portable   device  
connected

 
(artists
 
/
  albums   /   genres   /   playlists   /   audiobooks   /  
podcasts).
The

 
default
 
classification   used   is   by   artist.  
T
o   modify   the   classification  
used,

 
return
 
to
 
the
 
first   level   of   the   menu   then   select   the   desired  
classification

 
(playlists   for   example)   and   confirm   to   go   down   through  
the

 
menu
 
to
 
the
 
desired   track.
The
 
"Shuffle
 
tracks"   mode   on   an   iPod
® corresponds to the "Random" mode
 
on
 
the
 
audio
 
system.
The
 
"Shuffle
 
albums"
 
mode
 
on
 
an
 
iPod
® corresponds to the "Random all"
 
on
 
the
 
audio
 
system.
"Shuffle
 
tracks"
 
is
 
restored
 
by
 
default
 
on   each   connection.
The
 
version
 
of
 
software
 
in
 
the
 
audio
 
system   may   not   be   compatible  
with

 
the
 
generation
 
of
 
your
 
Apple® player.

08
321
DS3_en_Chap13b_RT6-2-8_ed01-2014
MUSIc MEdIA PLAYERS
Using the auxiliary input (AUX)
JA
c K/USB audio cable not supplied
Connect the portable device
(MP3,   WMA  player…)   to   the  
JACK

  auxiliary   audio   socket   or  
USB

 
port
 
using
 
a
 
suitable
 
cable.
Press

MUSI c to display the "MUSI c "
menu. Select "Activate /
d eactivate AUX
input   and   confirm.
First
  adjust   the   volume   of   your   portable  
device

  (to   a   high   level).  
Then
  adjust   the  
volume

  of   your   audio   system.
Display
  and   management   of   the   controls   are   via   the   portable   device.

333
DS3_en_Chap13b_RT6-2-8_ed01-2014
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
With
 
the   engine   off,   the  
system

  switches   off   after  
a

 
few
 
minutes   of   use. When
  the   engine   is   switched   off,   the   system's   operating   time   depends   on  
the

  battery   charge.
The
  switch-off   is   normal:   the   system   switches   to   economy   mode   and  
switches

  off   to   prevent   discharging   of   the   vehicle's   battery.Start
  the   vehicle's   engine   to   increase   the   battery  
charge.
Playback

  of   my   USB  
memory

  stick   starts   only  
after

 
a
  very   long   wait  
(around

  2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down   access  
to

  reading   the   memory   stick   (multiplication   by   10   of   the   catalogue   time).Delete
  the   files   supplied   with   the   memory   stick  
and

  limit   the   number   of   sub-folders   in   the   file  
structure

  on   the   memory   stick.
When
 
I   connect   my  
iPhone as telephone and
to the US

b port at the
same
 
time,   I   am   unable  
to

 
play
  the   music   files.When
  the   iPhone   connects   automatically   as   a   telephone,   it   forces   the  
streaming

  function.  
The
  streaming   function   takes   the   place   of   the   USB  
function which is then not useable, there is a period without sound of t\
he
track

  being   played   with  
Apple® players. Disconnect and reconnect to the US b port (the
USB   function   takes   priority   over   streaming).

05
DS3_en_Chap13c_RD45_ed01-2014
USB PLAYER
The system puts together playlists (temporary memory) created over  a   period   which   depends   on   the   capacity   of   the   USB   device.
The
  other   sources   are   available   during   this   time.
The
  playlists   are   updated   each   time   the   ignition   is   switched   off   or  
each

  time   a   USB   memory   stick   is   connected.
When
  connecting   for   the   first   time,   the   classification   suggested  
is

  by   folder.   When   you   reconnect,   the   classification   selected  
previously

  is   retained.Connect
  the   memory   stick   to   the   port,   directly   or  
using

  a   lead.   If   the   audio   equipment   is   switched  
on, the US

b source is detected as soon as it
is   connected.   Play   begins   automatically   after   a  
delay which depends on the capacity of the US

b
memory   stick.
The   file   formats   supported   are   .mp3   (mpeg1  
layer

  3   only)   and   .wma   (standard   9   only,  
128 kbits/sec

  compression).
Certain   playlist   formats   are   supported   (.m3u,   ...)
On   reconnection   of   the   previous   memory   stick  
used,

  play   is   resumed   automatically   with   the   last  
track

  played.
This
 
unit
 
consists
 
of
 
a
 
USB
 
port
 
and
 
an
 
auxiliary
 
Jack

 
socket*.
 
The

 
audio
 
files
 
are
 
transmitted
 
from

 
a
 
portable
 
device
 
-
 
digital
 
player
 
or
 
a
 
USB
 
memory

 
stick
 
-
 
to
 
your
 
Audio

 
system
 
and
 
heard
 
via

 
the
 
vehicle's
 
speakers.
USB
 
memory
 
stick
 
or
 
Apple® player of
generation
 
5
 
or
 
later:
-
 
Give

 
preference
 
to
 
multimedia   USB   memory  
sticks

 
(in
 
general
 
formatted   FAT
 
32   File  
a
llocation Table),
-

the

a
pple
® player lead is essential,
-
 
navigation

  through   the   file   database   is   also  
possible

 
by   means   of   the   steering   mounted  
controls.
Using the USB BOX
connecting a USB memory stick
o

ther
a
pple
® players of earlier generations and players
 
using   the   MTP  protocol*:
-
 
play

 
via
 
Jack-Jack   lead   only   (not   supplied),
-
 
navigation
  through   the   file   database   is   from  
the

 
portable   device. * Depending
  on   vehicle.

05
343
DS3_en_Chap13c_RD45_ed01-2014
Using the USB PORT
Press LIST briefly   to   display   the  previously
  selected   classification.
Navigate
  through   the   list   using   the   left/
right
  and   up/down   buttons.
Confirm
  the   selection   by   pressing   OK. The
  lists   available   are  
Artist,
  Genre   and   Playlist   (as   defined   in   the  
a pple
® player).
Selection   and   Navigation   are   described   in   steps   1   to   4   above.
Do
 
not
  connect   a   hard   disk   or   USB   connection   device   other  
than

 
audio   equipment   to   the   USB   port.  
This
  could   damage   your  
installation.
c

onnecting an Apple
® player via the USB port
Press
 
one   of   these   buttons   to   gain  
access

 
to
  the   previous   /   next   track   on  
the

 
classification   list   currently   being  
played.
Press and hold one of the buttons for
fast

 
forward   or   backward   play.
Press one of these buttons to
gain
 
access   to   the   previous   /   next  
Genre, Folder

,
a
rtist or Playlist on
the
 
classification   list   currently   being  
played.
Press and hold LIST

to display the
different
 
classifications.
Select
 
by
 
Folder
 
/
 
Artist

 
/
 
Genre
 
/
 
Playlist,
 
press

 
OK
 
to
 
select
 
the
 
classification
 
required,

 
then
 
press
 
OK
 
again
 
to
 
confirm.
-
 
by

 
Folder:
 
all
 
folders
 
containing
 
audio
 
files

 
recognised
 
on
 
the
 
peripheral
 
device.
-

 
by

 
Artist:

 
all
 
of
 
the
 
artist
 
names
 
defined

 
in
 
the
 
ID3
 
T

ags,
 
classified
 
in
 
alphabetical

 
order.
-
 by
 
Genre:
 
all
 
of
 
the
 
genres
 
defined
 
in
 the
 
ID3
 T
ags.
-
 
by

 
Playlist:
 
in
 
accordance
 
with
 
the
 
playlists

 
recorded
 
on
 
the
 
USB
 
device.
USB PLAYER

05
DS3_en_Chap13c_RD45_ed01-2014
The display and control is via the portable device.
First   adjust   the   volume   of   your   portable   device.
Then   adjust   the   volume   of   your   audio  
system.
Using the auxiliary input (AUX)
Adjusting the volume of the auxiliary
source
JAcK socket or USB port (according to vehicle)
USB PLAYER
Do not connect a device to both the JACK socket and the USB port
  at   the   same   time.
Connect the portable device (MP3
player…)
  to   the   JACK   socket   or   to  
the

  USB   port,   using   a   suitable   cable  
(not

  supplied). Press the S
o URCE button several
times
  in   succession   and   select  
AUX.
The

  auxiliary   input,   JACK   or   USB,   allows   the   connection   of   a  
portable

  device   (MP3   player...).