2015 Citroen C4 PICASSO RHD gearbox

185
Park Assist
This system provides active assistance with parking,   detecting   a   parking   space   then  
c

ontrolling   the   steering   to   park   in   the   space.
It
  controls   the   steering   while   the   driver  
m

anages   the   accelerator,   brakes,   gears   and  
c

lutch   (manual   gearbox).   During   phases   of  
e

ntry   into   and   exit   from   a   parking   space,   the  
s

ystem   provides   visual   and   audible   information  
t

o   the   driver   in   order   to   make   the   manoeuvres  
s

afe.   It   may   be   necessary   to   move   for wards  
a

nd   backwards   more   than   once. During
  a   manoeuvre   the   steering   wheel  
t

urns   quickly:   do   not   hold   the   steering  
w

heel,   do   not   place   your   hand   between  
t

he   spokes   of   the   steering   wheel   and  
t

ake   care   with   loose   and   bulky   clothing,  
s

carves,   handbags...   There   is   a   risk   of  
in

jury.
When
  Park   Assist   is   activated,   it  
p

revents   a   change   to   STOP   mode   of  
S

top   &   Start.   In   STOP   mode,   activation  
o

f   Park   Assist   restarts   the   engine.
The
  Park   Assist   system   cannot   in   any  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The
  driver   must   remain   in   control  
o

f   their   vehicle   ensuring   that   the  
s

pace   remains   clear   throughout   the  
m

anoeuvre.
In
  some   circumstances,   the   sensors  
m

ay   not   detect   small   obstacles   located  
i

n   their   blind   spots.
The
  driver   can   take   control   at   any   time   by  
g

ripping   the   steering   wheel. The
  Park   Assist   system   provides   assistance   for  t
he   following   manoeuvres:
-
 
e
ntry   into   a   parallel   parking   space
-
 
e
xit   from   a   parallel   parking   space
-
 
b
ay   parkingThe
  Park   Assist   system   takes   control  
o

f   the   power   steering   for   a   maximum  
o

f   4   manoeuvre   cycles.   The   function  
i

s   deactivated   after   these   4   cycles.  
I

f   you   think   that   your   vehicle   is   not  
p

ositioned   correctly,   you   should   then  
t

ake   control   of   the   steering   to   carry   out  
t

he   manoeuvre.
The
  Park   Assist   system   cannot   work  
w

ith   the   engine   off.
4
D

261
Changing a wheel
The tools are installed in the boot under the fl o o r.
Remove
  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
*   According   to   equipment.
al
l of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hocks   for   immobilising   the   vehicle  
(except
  versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   removal   tool.
 F

or   removing   the   finishers   on   the   heads   of  
t

he   wheel   bolts   on   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
7
Practical information

263
*  Depending  on   version.   The   complete   tooling  i
s   with   the   spare   wheel.
Changing a wheelProcedure for changing a wheel with a punctured tyre by the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
 
The
 
wheel   chocks   2 as well as the
wheelbrace
 
extension   6   are   stowed   under   the  
r

ight
 
hand
 
boot   sill.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
The
 
other
 
tools,   the   jack   3   and   the   tool   for  
r

emoving
 
the
 
wheel   bolt   head   finishers   for   alloy  
w

heels 4 ,
 
are
 
stowed   in   a   box   attached   to   the  
s

pare
 
wheel.
 
The   assembly   is   secured   under  
t

he
 
vehicle
 
in
 
a   carrier.   See   the   "Access   to   the  
s

pare
 
wheel"
 
section).
Access to the vehicle's tools*
2. Wheel   chocks   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   head   cover   removal   tool.
 F

or   removing   the   wheel   bolt   head   finishers  
o

n   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   unscrewing/tightening   the   spare   wheel  
c

arrier   drive.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of  
y

our hand.
List of tools*
all of these tools are specific to your vehicle
and   can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts.
7
Practical information

267
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   block   the   wheels.
Check
  that   the   braking   warning   lamp  
a

nd   the   P   warning   lamp   in   the   parking  
b

rake   control   lever   come   on.
For
  greater   safety,   place   a   chock   2
against
  the   wheel   opposite   to   the   one  
b

eing
 c
hanged.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   finisher   from   from   each  o
f   bolts   using   the   tool   4   (depending   on  
e

quipment).
F
 
F
it   the   security   socket   5 on the
wheelbrace


1   to   slacken   the   security   bolt  
(if
  fitted).
F
 
S
lacken   the   other   bolts   (no   more   than   a  
1

/4 turn)   using   the   wheelbrace   1  
o
n l y.
*


Position R
 
for
 
an
 
electronic
 
gearbox
 
or
 
P for
an
 
automatic
 
gearbox. Do
  not   use:
-
 
t
he   jack   for   anything   other   than  
l

ifting   the   vehicle,
-
 
a
ny   other   jack   than   the   one  
s

upplied   by   the   manufacturer.
7
Practical information

285
Type 2 fuse tables
Fuse N°Rating Functions
F3 3 ASTART/STOP
  button.
F6 A 15 ATouch
  screen   tablet,   audio   and   navigation   system,   CD   player,  
U

SB   ports   and   auxiliary   sockets.
F8 5 AAlarm.
F9 3 ASteering
  mounted   controls.
F19 5 AInstrument
  panel.
F24 3 ARain
  and   sunshine   sensor.
F25 5 AAirbags.
F33 3 AMemorisation
 o

f
 d
riving
 p
osition.
F34 5 AElectric
  power   steering.
F13 10 AFront
  12V   socket.
F14 10 ABoot
  12V   socket.
F16 3 AMap
  reading   lamps   in   row   1   courtesy   lamps.
F27 5 AElectronic
  gearbox   gear   selector.
F30 20 ARear
  wiper.
F38 3 AManual
 h

eadlamp
 a
djustment
 c
ontrol.
7
Practical information

290
The batteries contain harmful substances such   as   sulphuric   acid   and   lead.   They m

ust   be   disposed   of   in   accordance
 w

ith   regulations   and   must   not,   in   any
 c

ircumstances,   be   discarded   with   household
 w

aste.
Take
  used   remote   control   batteries   and
 v

ehicle   batteries   to   a   special   collection   point.
Protect your eyes and face before handling   the   battery.
All
  operations   on   the   battery   must   be  
c

arried   out   in   a   well   ventilated   area   and  
a

way   from   naked   flames   and   sources  
o

f   sparks,   so   as   to   avoid   the   risk   of  
e

xplosion   or   fire.
Do
  not   try   to   charge   a   frozen   battery;  
t

he   battery   must   first   be   thawed   out   to  
a

void   the   risk   of   explosion.   If   the   battery  
h

as   been   frozen,   before   charging   have  
i

t   checked   by   a   CITROËN   dealer   or   a  
q

ualified   workshop   who   will   check   that  
t

he   internal   components   have   not   been  
d

amaged   and   the   casing   is   not   cracked,  
w

hich   could   cause   a   leak   of   toxic   and  
c

orrosive   acid.
Do
  not   reverse   the   polarity   and   use   only  
a

  12   V   charger.
Do
  not   disconnect   the   terminals   while  
t

he   engine   is   running.
Do
  not   charge   the   batteries   without  
d

isconnecting   the   terminals   first.
Wash
  your   hands   after wards.
It
 
is
 
advisable
 
to
 
disconnect
 
the
 
battery
 
i

f
 
the
 
vehicle
 
is
 
to
 
be
 
left
 
unused
 
for
 
m

ore
 
than
 
one
 
month.
do n
ot push the vehicle to start the
engine
  if   you   have   an   electronic   or  
a

utomatic   gearbox.Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F  F ollow   the   instructions   for   use   provided   by  
t

he   manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered   with   sulphate  
(

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
With
  Stop   &   Start,   the   battery   does   not  
h

ave   to   be   disconnected   for   charging.
Do
 
not
 
apply
 
excessive
 
force
 
on
 
the
 
t

ab
 
as
 
locking
 
will
 
not
 
be
 
possible
 
if
 
the
 
c

lamp
 
is
 
not
 
positioned
 
correctly;
 
start
 
t

he
 
procedure
 
again.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
Reconnecting the (+) cable
F Position   the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Practical information

293
Towing the vehicle
The towing eye is installed in the boot under the   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F
 
l
ift   the   floor   and   remove   it,
F
 
r
emove   the   towing   eye   from   its   housing.
General recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving   licence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing  
a

rm;   rope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for  
b

raking   or   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
 
f
our-wheel   drive   vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release  
t

he   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed
 
or
 
for
 
towing
 
another   vehicle   using   the   towing   eye.
Access to the tools
7
Practical information

294
Towing another vehicle
F On  the   rear   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
F
 O
n
 
the
 
front
 
bumper,
 
unclip
 
the
 
cover
 
by
 p
ressing
 
on
 
the
 
left.
F
 
S

crew
 
the
 
towing
 
eye
 
in
 
fully.
F
 
I

nstall
 
the
 
towing
 
bar.
F
 
P

lace
 
the
 
gear
 
lever
 
in
 
neutral
 
(position
 
N
on
 
an
 
electronic
 
or
 
automatic
 
gearbox).
Towing your vehicle
Failure to observe this instruction could r esult   in   damage   to   certain   components  
(

braking,   transmission...)   and   the  
a

bsence   of   braking   assistance   the   next  
t

ime   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key  
i

n
  the   ignition   one   notch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
Practical information