2015 Citroen C4 PICASSO RHD Owner's Manual

71
Reactivation of the interior
volumetric monitoring
F Deactivate  the   exterior   perimeter  m
onitoring   by   unlocking   the   vehicle   using  
t

he   remote   control   or   the   Keyless   Entry   and  
S

tarting   system.
The
  indicator   lamp   in   the   button   goes   off.
F
 
R
eactivate   the   full   alarm   system   by   locking  
t

he   vehicle   using   the   remote   control   or   the  
"

Keyless   Entry   and   Starting"   system.
The
  indicator   lamp   in   the   button   flashes  
o

nce per   second   again.
Triggering of the alarm
This is indicated by sounding of the siren 
a nd   flashing   of   the   direction   indicators   for  
thirty
  seconds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key   (integral  
w

ith   the   remote   control)   in   the   driver's   door  
l

ock.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.  
T

he indicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the   key  (
integral   with   the   remote   control)   in   the  
d

river's   door   lock.
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   in   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Automatic activation*
2 minutes after the last door or the boot is closed,   the   system   is   activated   automatically.
F

To avoid triggering the alarm on entering the   vehicle,   first   press   the   unlocking   button o

n   the   remote   control   or   unlock   the   vehicle
 u

sing   the   Keyless   Entry   and   Starting   system.
* According to country.
2
Access

72
Electric windows
Manual operation
To open or close the window, press or pull the switch   gently.   The   window   stops   as   soon   as   the  
s

witch   is   released.
Safety anti-pinch
When the window rises and meets an obstacle, it   stops   and   immediately   partially   lowers   again.
In
  the   event   of   unwanted   opening   of   the  
w

indow   on   closing,   press   the   switch   until   the  
w

indow   opens   completely,   then   pull   the   switch  
i

mmediately   until   the   window   closes.   Continue  
t

o  
h
old  
t
he  
s
witch  
f
or  
a
pproximately  
o
ne  
s
econd  
a

fter   the   window   has   closed.
The
  safety   anti-pinch   function   is   not   active  
d

uring   this   operation.
1.
Le

ft hand front electric window.
2.
R

ight hand front electric window.
3.
R

ight hand rear electric window.
4.
Le

ft hand rear electric window.
5.
D

eactivating the electric window
switches located at the rear seats.
Automatic operation
To open or close the window, press or pull s witch   fully:   the   window   opens   or   closes  
c

ompletely   when   the   switch   is   released.  
P

ressing   the   switch   again   stops   the   movement  
o

f   the   window.
The
  electric   window   switches   remain  
o

perational   for   approximately   45   seconds   after  
s

witching   off   the   ignition.
Once
  this   time   has   elapsed,   the   electric  
w

indows   will   not   operate.   To   reactivate   them,  
s

witch   the   ignition   on   again.
Access

73
Reinitialisation of
the electric windows
Deactivating the rear controls
for the rear windowsIn the event of contact during operation o
f   the   windows,   you   must   reverse   the  
m

ovement   of   the   window.   To   do   this,  
p

ress   the   switch   concerned.
When
  operating   the   passenger   electric  
w

indow   switches,   the   driver   must  
e

nsure   that   nothing   is   preventing  
c

orrect   closing   of   the   windows.
The
  driver   must   ensure   that   the  
p

assengers   use   the   electric   windows  
c

o r r e c t l y.
Be
  particularly   aware   of   children   when  
o

perating
 t
he
 w
indows.
Be
  aware   of   passengers   or   other  
p

ersons   present   when   closing   the  
w

indows   using   the   the   electronic   key  
o

r   the   "Keyless   Entry   and   Starting"  
s

ystem.
Following
 
reconnection
 
of
 
the
 
battery,
 
the
 s
afety
 
anti-pinch
 
function
 
must
 
be
 
reinitialised.
The
 
safety
 
anti-pinch
 
function
 
is
 
not
 
active
 
d

uring
 
these
 
operations.
For
 
the
 
safety
 
of
 
your
 
children,
 
press
 
s

witch 5 to prevent operation of the
rear
 
windows
 
irrespective
 
of
 
their
 
p

ositions.
The
 
warning
 
lamp
 
in
 
the
 
button
 
comes
 
on,
 
a

ccompanied
 
by
 
a
 
message
 
confirming
 
a

ctivation.
 
It
 
remains
 
on,
 
as
 
long
 
as
 
the
 
child
 
l

ock
 
is
 
deactivated.
Use
 
of
 
the
 
rear
 
electric
 
windows
 
from
 
the
 
d

river's
 
controls
 
remains
 
possible. For
 
each
 
window:
-
 
l

ower
 
the
 
window
 
completely,
 
then
 
raise
 
it,
 
i

t
 
will
 
rise
 
in
 
steps
 
of
 
a
 
few
 
centimetres
 
with
 
e

ach
 
action.
 
Repeat
 
the
 
operation
 
until
 
the
 
w

indow
 
closes
 
completely,
-
 
c

ontinue
 
to
 
pull
 
the
 
switch
 
for
 
at
 
least
 
o

ne second
 
after
 
reaching
 
this
 
position,
 
w

indow
 c

losed.
2
Access

74
Front seats
Manual adjustments
Forwards-backwards
F Raise  the   control   bar   and   slide   the   seat  f
or wards   or   backwards.
When the seat is in the correct position, push
it
  for wards   and   backwards   without   raising   the  
c

ontrol   bar   to   check   that   the   it   has   latched.
Driver's seat backrest angle
F Turn  the   knob   to   adjust   the   seat   backrest.
As
 
a
 
safety
 
measure,
 
seat
 
adjustments
 
should   only   be   done   when   stationary.
Driver's seat height
F Pull
  the   control   upwards   to   raise   or   push  i
t   downwards   to   lower,   as   many   times   as  
n

ecessary,   to   obtain   the   position   required.
Seat
 
consisting
 
of
 
a
 
seat
 
cushion,
 
a
 
seat
 
back
 
and
 
a
 
head
 
restraint
 
which
 
can
 
all
 
be
 
adjusted
 
to
 
a

dapt
 
your
 
position
 
for
 
ease
 
of
 
driving
 
and
 
comfort.
Before
 
moving
 
the
 
seat
 
backwards,
 
ensure
 
that
 
there
 
is
 
nothing
 
that
 
might
 
prevent
 
the
 
full
 
travel
 
of   the   seat,   so   as   to   avoid   the   risk   of   of   jamming  
t

he
 
seat
 
caused
 
by
 
the
 
presence
 
of
 
objects
 
on
 
the
 
floor
 
behind
 
the
 
seat
 
or
 
rear
 
passengers.
 
If
 
the
  seat   jams,   stop   the   movement   immediately.
Comfort

75
Passenger's seat backrest angle
F Pull  the   control   upwards   to   adjust   the  b
ackrest.
When
  the   backrest   angle   is   correct,   release   the  
c

ontrol.
Table position for the
passenger's seat backrest
This position, associated with the position of the   rear   seats,   allows   you   to   carry   long   objects  
i

nside   the   vehicle.
When the backrest is at the correct angle, release   the   control   lever.   To   ensure   that   the b

ackrest   does   not   suddenly   fold   for wards
 a

nd   hurt   you,   restrain   it   with   your   back   or
 y

our   hand   while   operating   the   control.
Check that there is no object that could inter fere   with   the   movement   of   the   seat,  
b

oth   above   and   below.
F
 
P

lace   the   head   restraint   in   the   low   position,  
r

aise   the   armrest   and   fold   the   fixed   table  
o

nto   the   back   of   the   seat.
F
 
P

ull   the   control   fully   up   and   tip   the   backrest  
fo

rwards.
To
 
return   to   the   normal   position,   guide   the  
b

ackrest   backwards   until   it   locks.
3
Comfort

76
Front seats
Electric adjustments
Forwards-backwards (driver's
seat)
F Push  the   control   for wards   or   rear wards   to  s
lide   the   seat.
Seat backrest angle
F Tilt  the   control   for wards   or   rear wards   to  a
djust   the   angle   of   the   seat   backrest.
Seat cushion height and angle
F operate the rear part of the control upwards   or   downwards   to   obtain   the  
de

sired
 h
eight.
F
o
p
erate the front part of the control
upwards
  or   downwards   to   obtain   the  
de

sired
 a
ngle.
To avoid discharging the battery, carry out these   adjustments   with   the   engine   running.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming the   seat   caused   by   the   presence   of   objects   on   the   floor   behind   the   seat   or   rear   passengers.   If   the   seat   jams,   stop   the   movement   immediately.
Comfort

77
System which registers the electrical settings of   the   driver's   seat.   It   enables   you   to   store   and  
r

ecall   two   positions   using   the   buttons   on   the  
s

ide   of   the   driver's   seat.
Storing driving positions
Storing a position
Using buttons M / 1 / 2
F Switch  on   the   ignition.
F  A djust   your   seat   and   the   door   mirrors.
F

P
ress button M , then press button 1 or 2
within
  four   seconds.
 A

n   audible   signal   indicates   that   the   position  
h

as   been   stored.
Storing
  a   new   position   cancels   the   previous  
p

osition.
Recalling a stored position
Ignition on or engine running
F Press button 1 or 2 to recall the corresponding p osition.
 A

n   audible   signal   confirms   that   adjustment  
i

s   complete.
You
  can   interrupt   the   current   movement   by  
p

ressing   button   M, 1 or 2
  or   by   using   one   of   the  
s

eat   controls.
A
  stored   position   cannot   be   recalled   while  
d

riving.
Recalling
  stored   positions   is   deactivated  
4

5 seconds   after   switching   off   the   ignition.
3
Comfort

78
Additional adjustments
Head restraint height and angle
(depending on version)
The head restraint is fitted with a frame with notches   which   prevents   it   from   lowering;   this   is  
a

  safety   device   in   case   of   impact.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head. Never
  drive   with   the   head   restraints  
r

emoved;   they   must   be   in   place   and  
adj

usted
 c
orrectly.
F
 
T
o   raise   a   head   restraint,   pull   it   upwards.
F  
T
o   lower   the   head   restraint,   press   the   lug   A
and   the   head   restraint   at   the   same   time.
F  
T
o   adjust   the   angle   of   the   head   restraint,   tilt  
i

ts   lower   part   for wards   or   rear wards.
Removing a head restraint
F To
  remove   the   head   restraint,   press   the  l
ug   A   and   pull   the   head   restraint   upwards.
F
 
T
o   put   the   head   restraint   back   in   place,  
e

ngage   the   head   restraint   stems   in   the  
o

penings   keeping   them   in   line   with   the   seat  
b

ack   and   press   the   lug   A   at   the   same   time.
Comfort head restraints
Depending on version, you can fold the sides to obtain   a   more   comfortable   position.
Comfort