2015 Citroen C4 PICASSO steering

142
+. Control  paddle   for   changing   up,   to   the   right  o
f   the   steering   wheel.
F

P
ull the " +"
  paddle   towards   you   to   change   up.
-.
 C

ontrol   paddle   for   changing   down,   to   the  
l

eft   of   the   steering   wheel.
F

P
ull the " -"
  paddle   towards   you   to   change  
d

own.
Steering mounted control paddles
The steering mounted control paddles cannot   be   used   to   select   neutral   or   to  
s

elect   or   come   out   of   reverse. When
  you   move   the   gear   selector,   the   symbol  
c

orresponding   to   its   position   is   displayed   in   the  
in

strument
 pan
el.
P.
 Pa
rk.
R.
 R
everse.
N.
 N
eutral.
D.
 D
rive
 (
automatic
 ope
ration).
1 to 6.   Gears   engaged   in   manual   operation.
-.
 I
nvalid   value   in   manual   operation.
Displays in the instrument panelMoving off
F With
  your   foot   on   the   brake   pedal,   select  p
osition P or N .
F
 
S
tart   the   engine.
If P
  is   displayed   in   the   instrument   panel,  
a

lthough   the   gear   selector   is   in   another  
p

osition,   place   the   gear   selector   in  
p

osition P   to   be   able   to   start   the   engine.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
S
elect   automated   mode   (position   D),
 m

anual   mode   (position   M)   or   reverse  
(

position
 R).
I

f   you   do   not   press   the  
b

rake   pedal   to   come   out   of  
p

osition P,
  this   warning   lamp  
I
f   these   conditions   are   not   met,   there  
i

s   an   audible   signal   accompanied   by   a  
m

essage.
or
  symbol   appears   in   the   instrument  
p

anel,   accompanied   by   the   message  
"

Place   automatic   gearbox   in   position P",
flashing
  of   P   in   the   instrument   panel  
a

nd   an   audible   signal.
Driving

144
Invalid value in manual operationThis   symbol   is   displayed   if   a   gear   is  
n

ot   engaged   correctly   (gear   selector  
b

etween   two   positions).
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 c

hanges
 
using
 
the
 
 "
+"
 
and
 
"
- "
 
steering
 
mounted
 c

ontrol
 
paddles.
 
If
 
the
 
engine
 
speed
 
allows,
 
the
 i

nstruction
 
to
 
change
 
gear
 
is
 
acted
 
on.
This function allows you to anticipate certain
situations
 
s

uch
 
a

s
 
ov

ertaking
 
a

nother
 
v

ehicle
 
o

r
 
a

pproaching
 
a
 
bend.
After
 
a
 
few
 
moments
 
with
 
no
 
action
 
on
 
the
 c
ontrol
 
paddles,
 
the
 
gearbox
 
manages
 
the
 
g

ears
 
automatically
 
again.
Temporary manual control of the
gears
Manual mode
D and the gear engaged are displayed in the in strument pan el.
The
  gearbox   operates   in   auto-active  
m

ode,   without   any   action   from   the   driver.   It  
c

ontinuously   selects   the   most   appropriate   gear  
a

ccording   to   the   following   conditions:
-
 
o
ptimisation   of   fuel   consumption,
-
 
d
riving   style,
-
 
r
elief   of   the   road,
-
 
v
ehicle   load.
Automated mode
F Select position D .
For
 
maximum   acceleration,   without   touching  
t

he
 
gear
 
selector,   press   the   accelerator   fully  
d

own
 
(kick   down).   The   gearbox   changes   down  
a

utomatically   and   maintains   the   gear   selected  
u

ntil
 
the
 
maximum   engine   speed   is   reached.
When
 
braking,   the   gearbox   changes   down  
a

utomatically   for   more   effective   engine   braking.
When
 
you   take   your   foot   of   the   accelerator  
p

edal
 
suddenly,   the   gearbox   does   not   change  
u

p,
 
so
 
as
 
to   improve   safety. F
Sel ect position M.
F

U
se the "+"
  and   "- "
  steering   mounted  
c

ontrol   paddles   to   change   gear.
The
  gears   engaged   are   displayed   successively  
i

n   the   instrument   panel.
When
  stationary   or   at   very   low   speed,   the  
g

earbox   automatically   engages   1st
 g
e a r.
In
  manual   mode,   it   is   not   necessary   to   release  
t

he   accelerator   pedal   when   changing   gear.
The
  change   from   one   gear   to   another   is   only  
e

ffected   if   the   conditions   of   vehicle   speed   and  
e

ngine   speed   allow;   other wise   the   automatic  
l

aws   of   operation   are   imposed   temporarily.
If
  the   engine   speed   is   too   high   or   too   low,  
t

he   display   of   the   gear   selected   flashes   for   a  
f

ew   seconds,   then   the   new   gear   engaged   is  
d

isplayed.It
  is   possible   to   change   mode   at   any  
t

ime,   by   moving   the   gear   selector  
f

rom D to M   or   the   other   way   round.
Driving

147
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
The "ECO" warning   lamp   comes   on   in   the  i
nstrument   panel   and   the   engine   goes   into  
s

tandby
 a
utomatically:
-
 
w
ith a manual gearbox ,
  at   speeds   below  
1

2   mph   (20   km/h),   or   vehicle   stationary  
(

with   PureTech   130,   THP   165   and   BlueHDi  
1

00,   115   and   120   versions),   when   you  
p

lace   the   gear   lever   in   neutral,   and   you  
r

elease   the   clutch   pedal,
-
 
w
ith an ETG6 electronic gearbox , at
speeds
  below   5   mph   (8   km/h),   when   you  
p

ress   the   brake   pedal   or   place   the   gear  
s

elector lever in position N ,
-
 
w
ith an automatic gearbox , with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds   then   goes  
o

f f.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the
 
system,
 
a
 
time
 c
ounter
 
calculates
 
the
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
t

he
 
START/STOP
 
button.
4
driving

155
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. S peed   limiter   mode   selection   indication.
8.
 S

peed   value   setting.
Speed limiter "LIMIT"
System which prevents the vehicle from exceeding the speed programmed by the driver.
T he   speed   limiter   cannot,   in   any
 c

ircumstances,   replace   the   need   to
 o

bserve   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.
Once
  the   programmed   speed   limit   is   reached,  
a

dditional   pressure   on   the   accelerator   pedal  
h

as   no   effect.
1.
 S

elect   speed   limiter   mode.
2.
 D

ecrease
 p
rogrammed
 s
peed.
3.
 I

ncrease   programmed   speed.
4.
 S

peed   limiter   on   /   pause.
5.
 D

isplay   the   list   of   memorised   speeds.
Displays in the instrument panel
Switching on  the   speed   limiter   requires  a
  programmed   speed   of   at   least   20   mph  
(

30 km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
The
  programmed   speed   remains   in   the
 m

emory   when   the   ignition   is   switched   off.For
  more   information   on   the   list   of   memorised  
s

peeds,   refer   to   the   "Memorising   speeds"  
s

ection.
4
Driving

158
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selection   indication.
8.
 S

peed   value   setting.
Cruise control "CRUISE"
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control system cannot, in any circumstances, replace the need to observe speed limits, nor can it replace the need for vigilance on the part of the driver.
Y ou   are   advised   to   keep   your   feet   near   the   pedals   at   all   times.
Switching on the cruise control requires a
minimum   vehicle   speed   of   25   mph   (40   km/h).
As
  well   as   engagement   of:
-
 
f
ourth   gear   or   higher   on   a   manual   gearbox,
-
 
s
econd   gear   or   higher   in   manual   mode   on  
a

n   electronic   or   automatic   gearbox,
-
 
p
osition   A   on   an   electronic   gearbox   or   D on
an
  automatic   gearbox.
The cruise control is paused
 

manually   or  
b

y   pressing   the   brake   or   clutch   pedal   or  
o

n   triggering   of   the   ESP   system   for   safety  
r

easons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the  
p

rogrammed   cruise   speed   is   reached   again.1.
 S

elect   cruise   control   mode.
2.


a
c
tivate the cruise control at the current
speed
  of   the   vehicle,   then   decrease the
programmed
 s

peed.
3.


a
c
tivate the cruise control at the current
speed
  of   the   vehicle,   then   increase the
programmed
 s

peed.
4.
 P

ause   /   resume   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds.Displays in the instrument panel
Switching off the ignition cancels any programmed   speed   value. For
  more   information   on   the   list   of   memorised  s
peeds,   refer   to   "Memorising   speeds"   section.
Driving

163
1. Cruise  control   mode   selection   wheel.
2. B utton   for   reducing   the   cruise   speed  
s

etting   or   for   using   the   current   speed   of   the  
v

ehicle   as   the   cruise   speed   setting.
3.
 B

utton   for   increasing   the   cruise   speed  
s

etting   or   for   using   the   current   speed   of   the  
v

ehicle   as   the   cruise   speed   setting.
4.
 B

utton   for   pausing   /   resuming   the   cruise  
c

ontrol.
5.
 B

utton   for   displaying   the   list   of   memorised  
s

peeds   and   for   adjusting   the   inter-vehicle  
t

ime.
For
  more   information   on   the   list   of   memorised  
s

peeds,   refer   to   "Memorising   speeds".
Steering mounted controls
Switching on
The active cruise   control   must   be   selected   in  t
he " Driving assistance "
  menu.
F
 
T
urn   the   thumb   wheel   1 to the "CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   not   started   (Pause).
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed   of   your   vehicle   becomes   the   cruise  
s

peed   setting.
The
  cruise   control   is   activated   (ON).
By
  default,   the   inter-vehicle   time   is   set   at  
2 s

econds.
Other wise,
  the   last   speed   value   set   will   be   used  
f

or   operation   of   the   system.
Modification of the cruise control
speed only
Buttons 2 and 3
F By  successive   short   presses,   to   modify   by  s
teps   of   +   or   -    1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
of
  +   or   -   5   mph   (km/h).
As
  a   precaution,   it   is   recommended   that  
y

ou   select   a   speed   setting   close   to   the  
c

urrent   speed   of   your   vehicle.
Operation
4
Driving

179
360 Vision
This system provides a view in the instrument panel   of   the   near   surroundings   of   your   vehicle,  
u

sing   cameras   mounted   at   the   front   and   rear   of  
y

our   vehicle   and   under   the   door   mirrors.
Depending
  on   the   angle   of   view   chosen  
(front
  view,   rear   view   or   360°   panoramic   view),  
3

60 Vision   provides   special   visual   assistance  
i

n   particular   driving   conditions   such   as   when  
e

ntering   a   blind   crossing   or   manoeuvring   in  
a

reas   of   reduced   visibility.
Once
  activated,   this   function   operates   up   to  
9 m

ph   (15   km/h).   Above   18   mph   (30   km/h),   the  
f

unction   is   deactivated   automatically. This
  system   is   a   visual   aid   which   in   no  
c

ircumstances   can   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The   images   provided   by   the   cameras  
m

ay   be   deformed   by   the   relief.   The  
p

resence   of   areas   in   shade,   in   sunny  
c

onditions,   or   of   low   ambient   light   may  
d

arken   the   image   and   reduce   contrast.
Forward vision
The camera located in the front bumper is a
ctivated   and   views   of   the   areas   located   at  
f

ront   left   and   front   right   appear   simultaneously  
i

n   the   instrument   panel.
Rear vision
The camera located in the tailgate is activated and   the   view   of   the   area   behind   your   vehicle   is  
d

isplayed   in   the   instrument   panel   and   behaves  
l

ike   a   reversing   camera,   whatever   the   position  
o

f   the   gear   selector   lever.
The
  blue   lines   represent   the   width   of   your  
v

ehicle   (excluding   mirrors):   they   move  
a

ccording   to   the   position   of   the   steering   wheel.
The
  red   line   represents   a   distance   of   30   cm  
f

rom   the   rear   bumper,   and   the   two   green  
l

ines,   1   m   and   2   m   from   the   rear   bumper,  
r

espectively. Rear
  vision   is   displayed   automatically  
w

hen   engaging   reverse,   regardless   of  
t

he   state   of   the   system.
4
driving

181
Park Assist
This system provides active assistance with parking,   detecting   a   parking   space   then  
c

ontrolling   the   steering   to   park   in   the   space.
It
  controls   the   steering   while   the   driver  
m

anages   the   accelerator,   brakes,   gears   and  
c

lutch   (manual   gearbox).   During   phases   of  
e

ntry   into   and   exit   from   a   parking   space,   the  
s

ystem   provides   visual   and   audible   information  
t

o   the   driver   in   order   to   make   the   manoeuvres  
s

afe.   It   may   be   necessary   to   move   for wards  
a

nd   backwards   more   than   once. During
  a   manoeuvre   the   steering   wheel  
t

urns   quickly:   do   not   hold   the   steering  
w

heel,   do   not   place   your   hand   between  
t

he   spokes   of   the   steering   wheel   and  
t

ake   care   with   loose   and   bulky   clothing,  
s

carves,   handbags...   There   is   a   risk   of  
in

jury.
When
  Park   Assist   is   activated,   it  
p

revents   a   change   to   STOP   mode   of  
S

top   &   Start.   In   STOP   mode,   activation  
o

f   Park   Assist   restarts   the   engine.
The
  Park   Assist   system   cannot   in   any  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The
  driver   must   remain   in   control  
o

f   their   vehicle   ensuring   that   the  
s

pace   remains   clear   throughout   the  
m

anoeuvre.
In
  some   circumstances,   the   sensors  
m

ay   not   detect   small   obstacles   located  
i

n   their   blind   spots.
The
  driver   can   take   control   at   any   time   by  
g

ripping   the   steering   wheel. The
  Park   Assist   system   provides   assistance   for  t
he   following   manoeuvres:
A.
 e

ntry   into   a   parallel   parking   space
B.
 e

xit   from   a   parallel   parking   space
C.
 b

ay
 par
kingThe
  Park   Assist   system   takes   control  
o

f   the   power   steering   for   a   maximum  
o

f   4   manoeuvre   cycles.   The   function  
i

s   deactivated   after   these   4   cycles.  
I

f   you   think   that   your   vehicle   is   not  
p

ositioned   correctly,   you   should   then  
t

ake   control   of   the   steering   to   carry   out  
t

he   manoeuvre.
The
  Park   Assist   system   cannot   work  
w

ith   the   engine   off.
4
Driving