2015 Citroen C4 key

05

381
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
In the contextual menu:
-
select "
Telephone mode " to
transfer
  the   call   to   the   telephone.
-

deselect "
Telephone mode" to
transfer
  the   call   to   the   vehicle.
In
 
certain
 
cases,   the   combined   mode   has   to   activated   from   the  
telephone.
If

 
the
 
contact   has   been   cut   off,   when   you   reconnect   on   returning   to  
the

 
vehicle,
 
the   Bluetooth   connection   will   be   restored   automatically  
(depending

 
on   the   compatibility   of   the   telephone).
Combined mode
(to
 
leave
 
the
  vehicle   without   ending   the   call)
USING THE TELEPHONE
From the contextual menu, select
"DTMF tones"   and   confirm   to  
use

  the   digital   keypad   to   navigate   in  

the

  interactive   voice   response   menu.
From
  the   contextual   menu,  
select

"Switch"   and   conform   to   return  
to

  a   call   left   on   hold.
Interactive voice response
Consultation call

395
C4-2_en_Chap14_index-alpha_ed01-2015
C4-2_en_Chap14_index-alpha_ed01-2015
Halogen headlamps .....................................24 3
Hands-free   kit  .............................. 3 46,   347,   375
Hazard
 w

arning
 lam
ps
 ................................. 15

0
Headlamp
 adj

ustment
 .................................. 12

5
Headlamps,
 d

irectional
 ................ 1
25,   126,   242
Headlamp
 w

ash
 ........................................... 13

0
Head restraints, front
 ........

...................................................... 93
Head restraints, rear
 ...............................

................................96
Heated seats
 ...............................

...................93
Heating
 ................

............................... 81,   82,   84
Height
  and   reach   adjustment,  
steering
 w

heel
 ..............................
.............10 0
Hill start assist
 
.............................................. 18

8
Hooks
 ...............................

.............................114Instrument p
anels ............................... .......12-14
Instrument
  panel   screen  ....................1 2-14,   189
Intelligent
 T

raction
 
C

ontrol
 .......................................................15

2
Interior
 f

ittings
 .......................................10

1, 102
Interior
  mood  
lighting
 ..............................

.........................13 4
IS
oFI

X
 ...............
..........................................146
ISOFIX
 m

ountings........................................ 14 4Key
  not   recognised  ......................................16
7
Key
  with   remote  
control
 ..................................................... 53

-58
Labels, identification
 .................................... 28

6
Lamps,
  warning   and   indicator  
..................16

-28
Lane
  Departure   Warning  
System
  (LDWS)  
...............................
..........195
Level,
a d
blu
e
® additive .......................... 23,   226
Level,
 
brake
 
fluid  .......................................... 2
16
Level,
 
power
 
steering   fluid  
........................... 2

16
Levels
 
and
 
checks  
..............................
..213 -218
Lighting
 
bulbs
 
(replacement)  
................2

42-250
Lighting
 
control   stalk  
.............................1
18,   122
Lighting
 
dimmer  
..............................
.... 12-14,   35
Lighting,
 
guide-me   home  
..................... 12

2, 124
Lighting,
 i

nterior
 ................................... 13

3,
 13
4
Loading
 ..............................

.................... 10,   262
Load
 
reduction   mode  
................................... 26

0
Load space cover
 
...............................
...........117
Locating
 
your
 
vehicle  
............................... 5
6,   61
Locking
 
from
 

the inside
 ..............................

.......................65
Locking
 
the
 
boot............................................. 72
Long
 
objects,
 
transporting  
............................ 11

2
Low fuel level
 
..............................
........... 20,   208
Luggage
 
retaining  
strap
 ............................................................ 11

3
L
Ignition on.............................................16 3, 16 8
Indicator   lamps,  
status
 ...............

....................................... 16 -28
Indicators, direction
 ..................... 1

50, 242, 244
Inflating
 a

ccessories
 
(

using   the   kit)  
..............................
...............233
Inflating
  tyres  
..............................
........... 10,   286
Inputs for audio system
 
................
................ 103,   306,   310,   373
Installing
 s

peakers
 ...............................
........272
Instrument
  panel  
lighting
 ..............................

...........................35
I
Jack .............................................................. 234
Jack   cable  .............................................3 10,   372
JACK
  socket  
......................... 1
03,   306,   310,   373
Jukebox
  (playing)  
.......................................... 3

11
J
H
Keeping children 
s afe ............... .......................135 -149,   157,   159
key .......

.....................................................53-64
ke

y, electronic
 ........................................... 59

-63
Key
  in   ignition  
warning
 ...............................

.......................165
ke

yless Entry and
Starting
 ................................................... 53

-64
K
.
alphabetical index

3
Access3
C4-2-add_en_Chap03_ouvertures_ed01-2015
Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle.
Remember to refit the mat below the armrest after removing the reinitialised electronic key.
Remote control problem /
reinitialisation
 Place the back-up key (integral with the remote control) in the lock to unlock your vehicle.
 Open the front armrest. ● Raise the mat by its tongue and remove it. ● Place the electronic key on the back-up reader.  Switch on the ignition by pressing
the " START/STOP " button. The electronic key is fully operational again.
If the problem persists, contact a CITROËN dealer or a qualified workshop as soon as possible.

Driving
6
C4-2-add_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby automatically:
- with a manual gearbox , at speeds below 12 mph (20 km/h), or vehicle stationary with PureTech 130 petrol and BlueHDi 115 and 120 Diesel versions, when you put the gear lever into neutral and release the clutch pedal, - with an electronic gearbox , at a speed below 5 mph (8 km/h), when you press the brake pedal or place the gear lever in position N . - with an automatic gearbox, vehicle stationary, when you press the brake pedal or place the gear lever in position N .
If your vehicle is fitted with the system, a time counter calculates the sum of the periods in STOP
Special cases: STOP mode unavailable
STOP mode is not invoked when: - the vehicle is on a steep slope (up or down), - the driver's door is open, - the driver's seat belt is not fastened, - the vehicle has not exceeded 6 mph (10 km/h) since the last engine start (using the key or the "START/STOP" button), - the electric parking brake is applied or being applied, - the engine is needed to maintain a comfortable temperature in the passenger compartment, - demisting is active, - some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system.
In this case, the "ECO" warning lamp flashes for a few seconds, then goes of f. This operation is perfectly normal.
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Per fect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
STOP mode does not affect the functionality of the vehicle, such as braking, power steering, for example. Never refuel with the engine in STOP mode; you must switch off the ignition
with the key or the "START/STOP" button.
With an electronic gearbox, for your comfort during parking manoeuvres, STOP mode is not available for a few seconds after coming out of reverse g e a r.
mode during a journey. It resets itself to zero every time the ignition is switched on with the key or the "START/STOP" button.

Driving
8
C4-2-add_en_Chap09_conduite_ed01-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF" switch warning lamp flashes, then comes on continuously. Have it checked by a CITROËN dealer or a qualified workshop.
Operating fault
This system requires a specific battery with a special specification and technology (reference numbers available from a CITROËN dealer or a qualified workshop). Fitting a battery not listed by CITROËN introduces the risk of malfunction of the system.
Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from automatic operation of START mode.
The Stop & Start system makes use of advanced technology. All work on this type of battery must be done only by a CITROËN dealer or a qualified
workshop.
In the event of a fault in STOP mode, the vehicle may stall. All of the instrument panel warning lamps come on. Depending on version, an alert message may also be displayed asking you to put the gear lever into position Nand put your foot on the brake pedal.
It is then necessary to switch off the ignition, then restart the engine using the key or the "START/STOP" button.
Reactivation
The system is reactivated automatically at every new start using the key or the "START/STOP" button.
Press the "ECO OFF" switch again. The system is active again; this is confirmed by the switch warning lamp going off and the display of a message.
Deactivation
At any time, press the "ECO OFF" switch to deactivate the system. This is confirmed by the switch warning lamp coming on accompanied by the display of a message.
If the system has been deactivated in STOP mode, the engine restarts immediately.

Driving
10
C4-2-add_en_Chap09_conduite_ed01-2015
With the touch screen tablet
 Press this button to select the " Driving " menu.
 In the secondary page, press " Speed settings ".
 Select the system for which you want to memorise new speed settings:
● s p e e d l i m i t e r
or
● c r u i s e c o n t r o l .
"MEM" button
Press this button to select a speed settings for use by the speed limiter or cruise control. Refer to the corresponding section.
Modifying a speed setting
 Enter the new value using the numerical keypad and confirm.  Confirm to save the modification and quit the menu.
 Choose the speed setting to be modified.

.
Audio and Telematics 47
C4-2-add_en_Chap13b_SMEGplus_ed01-2015
Select a radio station or frequency (refer to the corresponding section). Press on Radio Media to display the primary page.
Press on the secondary page.
Select " Settings ".
Select " Radio ".
Activate/deactivate " RDS options ".
Press on Radio Media to display the primary page.
Press on the secondary page.
Press on " Preset ".
Select a number in the list to preset the previously chosen radio station. A long press on a number presets (memorises) the station.
Press on Frequency . Frequency . Frequency
Enter the frequency in full (e.g.: 92.10 MHz) using the keypad then " Confirm ".
Changing radio station Pressing the name of the current radio station brings up a list. To change radio station press the name of the desired station.
Or
Press on Radio Media to display the primary page.
Select " Save ".
Preset a station Activate/ Deactivate RDS
OR
THEN
A press on this button presets all of the stations one after the other.
Recall pre-set stations
RDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.

Audio and Telematics
74
C4-2-add_en_Chap13b_SMEGplus_ed01-2015
Managing paired
telephones
This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing.
Using the telephone is not recommended while driving. Park the vehicle. Make the call using the steering mounted controls. Press on Telephone to display the primary page.
Press on the secondary page.
Select " Bluetooth " to display the list of paired peripheral devices.
Select the peripheral in the list.
Select " Search for devices "
Or
" Connect / Disconnect " to start or end the Bluetooth connection with the selected device.
Or " Delete " to delete the pairing.
Receiving a call
An incoming call is announced by a ring and a superimposed display in the screen.
Make a short press on the steering mounted TEL button to accept an incoming call.
Make a long press
on the steering mounted TEL button to reject the call.
Or
Select " End call ".
Making a call
Calling a new number
Press on Telephone to display the primary page.
Enter the phone number using the digital keypad. Press " Call " to start the call.
Calling a contact
Press on Telephone to display the primary page.
Or make a long press
on the steering mounted TEL button.