2015 Citroen C4 gearbox

173
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Immobilising the vehicle,
engine running
- illumination  of   the   braking  w
arning   lamp   and   the   P   warning  
l

amp   in   the   control   lever   A,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
Particular situations
In certain situations (e.g. starting the engine), the   parking   brake   can   automatically   alter   its  
f

orce.   This   is   normal   operation.
To
  advance   your   vehicle   a   few   centimetres  
w

ithout   starting   the   engine,   but   with   the   ignition  
o

n,   press   on   the   brake   pedal   and   release   the  
p

arking   brake   by pulling then releasing the
control lever A .
  The   full   release   of   the   parking  
b

rake   is   confirmed   by   the   warning   lamps   in  
t

he control lever A   and   in   the   instrument   panel  
g

oing   off   and   display   of   the   message   "Parking  
b

rake   off ".
When
 
the
 
driver’s
 
door
 
is
 
opened,
 
a
 
message
 
is
 
d

isplayed
 
accompanied
 
by
 
an
 
audible
 
signal,
 
if
 
t

he
 
parking
 
brake
 
has
 
not
 
been
 
applied,
 
except
 
i

n
 
the
 
case
 
of
 
an
 
automatic
 
gearbox
 
with
 
the
 
g

ear
 
lever
 
in
 
position
 
P .
The
 
application
 
of
 
the
 
parking
 
brake
 
is
 
c

onfirmed
 
by:
With
 
the
 
engine
 
running
 
and
 
the
 
vehicle
 s
tationary,
 
in
 
order
 
to
 
immobilise
 
the
 
vehicle
 
i

t is essential to manually
 

apply
 
the
 
parking
 
b

rake
 
by
 
pulling control lever A .
Before
 
leaving
 
the
 
vehicle,
 
ensure
 t

hat
 
parking
 
brake
 
warning
 
lamp
 
in
 
the
 i

nstrument
 
panel
 
is
 
on
 
fixed,
 
not
 
flashing.
9
Driving

178
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
6-speed manual gearbox
Engaging 5th or 6th gear Engaging reverse gear
F Raise  the   ring   under   the   knob   and   move  t
he   gear   lever   to   the   left   then   for wards.Only
  engage   reverse   gear   when   the
 v

ehicle   is   stationary   with   the   engine   at   idle.
as a s

afety precaution and to facilitate
starting   of   the   engine:
-
a
lways select neutral,
-  
p
ress   the   clutch   pedal.
F
 
M

ove
 
the
 
lever
 
fully
 
to
 
the
 
right
 
to
 
engage
 
5th or 6th ge a r.
Failure to observe this procedure
may
 
cause   permanent   damage   to   the  
g

earbox
 (
engaging
 3rd or 4th gear by m
i st a ke).
Driving

179
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Electronic gearbox
Six-speed electronic gearbox which offers a c
hoice   between   the   comfort   of   fully   automatic  
o

peration   or   the   pleasure   of   manual   gear  
c

hanging.
There
  are   two   driving   modes:
-

a
utomated
 
mode   for   automatic   control  
o

f   the   gears   by   the   gearbox,   without   any  
a

ction on the part of the driver
-

m
anual
 
mode   for   sequential   gear   changing  
b

y   the   driver   using   the   steering   mounted  
p

addles. R.

R
everse
F
 
W
ith   your   foot   on   the   brake,   lift   the   lever  
an

d
 p
ush
 fo
rwards.
N.
 N

eutral.
F
 
W
ith   your   foot   on   the   brake,   select   this  
p

osition   to   start.
A.
  A

utomated   mode.
F
 
M
ove   the   lever   backwards   to   select   this  
m

ode.
M.
  S

equential   mode   with   manual   gear  
c

hanging.
F
 
M
ove   the   lever   backwards   then   to   the   left  
t

o   select   this   mode,   then   use   the   steering  
m

ounted   control   paddles   to   change   gear.Gear lever
+.  Change  up   paddle   to   the   right   of   the  s
teering w heel.
F
 
P
ress   the   back   of   the   "+"
 
steering   mounted  
p

addle   to   change   up   a   gear.
-.
  C

hange   down   paddle   to   the   left   of   the  
s

teering
 w
heel.
F
 
P
ress   the   back   of   the   "-"
 
steering   mounted  
p

addle   to   change   down   a   gear.
Steering mounted control paddles
In automated mode, you can temporarily take over   control   of   gear   changing.
The
  steering   mounted   paddles   cannot  
b

e   used   to   select   neutral   or   to   engage  
o

r
 d
isengage
 r
everse
 g
ear.
9
driving

181
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automated mode
For optimum acceleration, for example when   overtaking   another   vehicle,   press   the  
a

ccelerator   pedal   firmly   past   the   point   of  
r

esistance.
The
  gearbox   operates   in   auto-active   mode,  
w

ithout   any   action   on   the   part   of   the   driver.  
It   continuously   selects   the   most   suitable   gear  
fo

r:
-  
o
ptimisation   of   fuel   consumption,
-  
t
he   style   of   driving,
-  
t
he   profile   of   the   road.
-  
t
he   vehicle   load.
AUTO
 
and   the   gear   engaged  
a

ppear   in   the   instrument   panel  
sc

reen.
ne

ver select neutral N while the vehicle
is
  moving.
ne
ver select neutral N  
w
hen
 d
riving. You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
F

Sel
ect position A
.
Temporary control of gear
changing
You can temporarily take over control of g
ear   changing   using   the   "+" and "-" 
steering  
m

ounted   paddles:   if   the   engine   speed   allows,  
t

he   request   to   change   gear   is   acted   on.
This function allows you to anticipate certain
situations
  such   as   overtaking   a   vehicle   or   the  
a

pproach   to   a   corner.
After
  a   few   moments   without   any   action   on  
t

he   control   paddles,   the   gearbox   resumes  
a

utomatic   control   of   the   gears.
Manual mode
The gears engaged appear in succession   in   the   instrument   panel  
sc

reen.
The
 
gear
 
change   requests   are   only   acted   on   if  
t

he
 
engine
 
speed   permits.
It is not necessary to release the accelerator
during
 
gear
  changes.
When
 
braking   or   slowing   down,   the   gearbox  
c

hanges
 
down   automatically   to   allow   the  
v

ehicle
 
to
 
accelerate   in   the   correct   gear.
On
 
sharp
 
acceleration,   the   gearbox   will   not  
c

hange
 
up
 
unless   the   driver   acts   on   the   gear  
l

ever
 
or
 
the
  steering   mounted   paddles.
F

Sel

ect position M
.
9
Driving

182
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
At low high speed, if reverse gear is requested, the N   indicator   flashes   and   the   gearbox   goes  
i

nto   neutral   automatically.   To   engage   reverse,  
p

ut   the   gear   lever   in   position   N, then position R .
Reverse
To engage reverse gear R,   the   vehicle   must   be  i
mmobilised   with   your   foot   on   the   brake   pedal.
F

Sel
ect position R .
Operating fault
Stopping the vehicle
When immobilising the vehicle, with t
he   engine   running,   you   must   place   the  
g

ear   lever   in   neutral   N.
Before
  carrying   out   any   work   in   the  
e

ngine   compartment,   ensure   that   the  
g

ear   lever   is   in   neutral N and that the
parking
  brake   is   applied.
Whatever
  the   circumstances,   you   must  
m

anually   apply   the   parking   brake   when  
p

arking,   unless   the   parking   brake   is  
p

rogrammed   in   automatic   mode.
Before
  switching   off   the   engine,   you   can:
-
 
m

ove   to   position   N   to   engage   neutral,


or
-
 
l

eave   the   gear   engaged;   in   this   case,   it   will  
n

ot   be   possible   to   move   the   vehicle.
In both cases, you must apply the parking
brake
 
to   immobilise   the   vehicle.
With   the   ignition   on,   the   flashing   of   AUTO
,
accompanied   by   an   audible   signal   and   a  
m

essage   in   the   screen,   indicates   a   malfunction  
o

f   the   gearbox.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
driving

183
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automatic gearbox
Gear selection gate
1. Gear  lever.
2. bu tton "S" (spor t) .
3.


b
u
tton "T" (snow) . P.
  P

ark.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-  
S
tarting   the   engine.
R.
 
 
R
everse.
-  
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
  N
eutral.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n.
-  
S
tarting   the   engine.
D.
 
 
A
utomatic
 ope
ration.
M + / - .   
M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F  P ress   for wards   to   change   up   through   the  g
ears.


or
F
 
P
ress   rear wards   to   change   down   through  
t

he   gears.
Gear lever
When you move the lever in the gate to select a  position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
  P

ark
R.

R
everse
N.
n
e
utral
D.
  D

rive   (Automatic   driving)
S.

Sp
ort
 pro
gramme
T .
 
S
now
 pro
gramme
1 to 6.
  Gear   engaged   during   manual   operation
-.
  I

nvalid   value   during   manual   operation
Displays in the instrument panelSix speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration, enhanced by sport and snow
programmes,
 o

r
 m
anual
 g
ear
 c
hanging.
Four
  driving   modes   are   offered:
-

a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,
-

sp
ort
 
programme   for   a   more   dynamic   style  
o

f   driving,
-

s
now
 
programme   to   improve   driving   when  
t

raction is poor,
-

m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver.
9
Driving

184
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Moving off
A message is displayed if you try to move   the   gear   lever   from   position   P to
another
  position   without   pressing   the  
b

rake
 ped
al. F

Sel
ect position D for automatic
 c
hanging
 o

f   the   six   gears.
The   gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  
t

he profile of the road and the load in the
vehicle.
For   maximum   acceleration   without   touching  
t

he lever, press the accelerator pedal down
fully   (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On   braking,   the   gearbox   changes   down  a
utomatically   to   provide   efficient   engine  b
raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
When
  the   engine   is   running   at   idle,   with  
t

he   brakes   released,   if   position   R
, D or
M   is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When   the   engine   is   running,   never  
l

eave children in the vehicle without
supervision.
When   carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P
.
ne

ver select position N while the
vehicle
  is   moving.
ne

ver select positions P or R unless the
vehicle
  is   completely   stationary.
If position N
 
is
 
engaged
 
inadvertently
 
w

hile
 
driving,
 
allow
 
the
 
engine
 
to
 
r

eturn
 
to
 
idle
 
then
 
engage
 
position
 
D to
accelerate.
F
 
W

ith
 
your
 
foot
 
on
 
the
 
brake,
 
select
 
p

osition


P or N
.
F
 
S

tart
 
the
 
engine.
If this procedure is not followed, there is an
audible
 
signal,
 
accompanied
 
by
 
a
 
message
 
in
 
t

he
 
multifunction
 
screen.
F
 
W

ith
 
the
 
engine
 
running,
 
press
 
the
 
brake
 
ped

al.
F
 
R

elease
 
the
 
parking
 
brake,
 
unless
 
it
 
is
 
p

rogrammed
 
to
 
automatic
 
mode.
F

Sel

ect position R
, D or M,
F
 
G

radually
 
release
 
the
 
brake
 
pedal.
The
 
vehicle
 
moves
 
off
 
immediately.
Automatic operation
Driving

185
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
These two special programmes supplement the automatic   operation   in   very   specific   conditions  
o

f   use.
Sport programme "S"
F Press button "S" ,   after   starting   the   engine.
The   gearbox   automatically   favours   a   dynamic  
s

tyle   of   driving.
S
  appears   in   the   instrument   panel.
Snow programme "T"
F Press button " T",   after   starting   the   engine.
The   gearbox   adapts   to   driving   on   slippery  
r

oads.
This
  programme   improves   the   vehicle's   ability  
t

o   move   off   and   traction   when   grip   is   poor.
T
  appears   in   the   instrument   panel.F
 
A
t   any   time,   press   the   button   selected  
a

gain   to   quit   the   programme   engaged   and  
r

eturn   to   auto-adaptive   mode.
Sport and snow programmes
Return to automatic
operation
9
Driving