2015 Citroen C4 check engine

209
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Fuel used for petrol
engines
The petrol engines are compatible with E
10   bio-petrol   (containing   10   %   ethanol),  
c

onforming   to   European   standards   EN   228  
and
  EN   15376.
E85
  type   fuels   (containing   up   to   85   %   ethanol)  
a

re   reserved   exclusively   for   vehicles   marketed  
f

or   the   use   of   this   type   of   fuel   (BioFlex  
v

ehicles).   The   quality   of   the   ethanol   must  
c

omply   with   European   standard   EN   15293.
Fuel used for Diesel
engines
The Diesel engines are compatible with biofuels   which   conform   to   current   and   future  
E

uropean   standards   (Diesel   fuel   which  
c

omplies   with   standard   EN   590   mixed   with   a  
b

iofuel   which   complies   with   standard  
EN
  14214)   available   at   the   pumps   (containing  
u

p   to   7   %   Fatty   Acid   Methyl   Ester).
B30
  biofuel   can   be   used   in   certain   Diesel  
e

ngines.   However,   this   use,   even   occasional,  
r

equires   strict   application   of   the   special  
s

ervicing   conditions.   Contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
The
  use   of   any   other   type   of   (bio)fuel  
(

vegetable   or   animal   oils,   pure   or   diluted,  
d

omestic   fuel...)   is   strictly   prohibited   (risk   of  
d

amage   to   the   engine   and   fuel   system).
The
 
petrol
 
or
 
Diesel
 
engine
 
of
 
your
 
vehicle
 
is
 f
itted with a catalytic converter, a device which
helps
 
to
 
reduce
 
the
 
level
 
of
 
harmful
 
emissions
 
i

n
 
the
 
exhaust
 
gases.
For petrol engines, the use of unleaded fuel
is compulsory.
The
 
filler
 
neck
 
is
 
narrower,
 
admitting
 
unleaded
 
p

etrol
 
nozzles
 
only.
Fuel supply cut-off
Your vehicle is equipped with a safety device w hich cuts off the fuel supply in the event of a
collision. If you have put in the wrong fuel for
your vehicle, you must have the tank
drained and refilled with the correct
fuel before you star t the engine.
10
Checks

210
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Misfuel prevention (Diesel)*Mechanical device which prevents filling the tank of a Diesel vehicle with petrol. It avoids the risk of engine   damage   that   can   result   from   filling   with   the   wrong   fuel.
Located
  in   the   filler   neck,   the   misfuel   prevention   device   appears   when   the   filler   cap   is   removed.
When a petrol filler nozzle is introduced into the
fuel
  filler   neck   of   your   Diesel   vehicle,   it   comes  
i

nto   contact   with   the   flap.   The   system   remains  
c

losed   and   prevents   filling.
Do not persist but introduce a Diesel type
filler nozzle.
*
  According   to   country   of   sale. It
  remains   possible   to   use   a   fuel   can   to  
f

ill   the   tank.
In
  order   to   ensure   a   good   flow   of   fuel,  
d

o not place the nozzle of the fuel can
in direct contact with the flap of the
misfuel
  prevention   device   and   pour  
s

l ow l y.
Travelling abroad
As Diesel fuel pump nozzles may be different in other countries, the
presence
  of   the   misfuel   prevention  
d

evice   may   make   refuelling   impossible.
Before
  travelling   abroad,   we  
r

ecommend   that   you   check   with   the  
C

ITROËN   dealer   network,   whether   your  
v

ehicle   is   suitable   for   the   fuel   pumps   in  
t

he   country   in   which   you   want   to   travel.
Operation
Checks

211
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Running out of fuel (Diesel)
1.6 HDi engine2.0 HDi engineOn vehicles fitted with HDi engines, the fuel s
ystem   must   be   primed   if   you   run   out   of   fuel;  
r

efer   to   the   corresponding   engine   compartment  
v

iew.
If
  the   tank   on   your   vehicle   is   fitted   with   a  
m

isfuel   prevention   device,   refer   to   the   "Misfuel  
p

revention
 (
Diesel)"
 s
ection.
BlueHDi 100, 115 and
120

engines
If the engine does not start first time, d
on't   keep   trying   but   start   the   procedure  
a

gain   from   the   beginning. F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
d

iesel.
F  
O
pen   the   bonnet.
F  
I
f   necessary,   unclip   the   styling   cover   for  
a

ccess   to   the   priming   pump.
F  
S
queeze   and   release   the   priming   pump  
r

epeatedly   until   resistance   is   felt   (there  m
ay   be   resistance   at   the   first   press).
F  O perate   the   starter   until   the   engine   starts  
(

if   the   engine   does   not   start   at   the   first  
a

ttempt,   wait   around   15   seconds   before  
t

rying
 ag
ain).
F
 
I
f   the   engine   does   not   start   after   a   few  
a

ttempts,   operate   the   priming   pump   again  
t

hen   start   the   engine.
F
 
R
efit   the   styling   cover   and   clip   it   in   place.
F
 
C
lose   the   bonnet.F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F  
O
pen   the   bonnet.
F
I
f necessary, unclip the style cover for
access   to   the   priming   pump.
F  
S
lacken   the   bleed   screw.
F  
S
queeze   and   release   the   priming   pump  r
epeatedly until fuel appears in the
transparent p ipe.
F
 
T
ighten   the   bleed   screw.
F
 
O
perate   the   starter   until   the   engine   starts  
(

if   the   engine   fails   to   start   at   the   first  
a

ttempt,   wait   around   15 seconds   before  
t

rying
 ag
ain).
F
 
I
f   the   engine   fails   to   start   after   a   few  
a

ttempts,   operate   the   priming   pump   again,  
t

hen   the   starter.
F
 
P
ut   the   style   cover   back   in   position   and  
c

lip   it   in   place,   ensuring   that   it   has   clipped  
c

o r r e c t l y.
F
 
C
lose   the   bonnet.
F
 
F

ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F
 
S

witch   on   the   ignition   (without   starting   the  
e

ngine).
F
 
W

ait   around   6   seconds   and   switch   off   the  
ig

nition.
F
 
R

epeat   the   operation   10   times.
F
 
O

perate   the   starter   to   run   the   engine.
10
Checks

212
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
bonnet
F Push  the   exterior   safety   catch   B to the left
and   raise   the   bonnet.
Opening
F Open  the   front   left   door.
F P ull the interior bonnet release lever A,
located
  at   the   bottom   of   the   door   aperture.
F
 
U
nclip   the   stay   C   from   its   housing   on   the  
b

ack   of   the   bonnet.
F
 
F
ix   the   stay   in   the   notch   to   hold   the   bonnet  
ope

n.
Closing
F Take  the   stay   out   of   the   support   notch.
F  C lip   the   stay   in   its   housing   on   the   back   of  
t

he   bonnet.
F

L
ower the bonnet and release it at the end
of
  its   travel.
F
 
P
ull   on   the   bonnet   to   check   that   it   is  
s

ecured
 c
orrectly.
The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades.
Before
 
doing
 
anything
 
under
 
the
 
b

onnet, switch off the Stop & Start
system
 
to
 
avoid
 
any
 
risk
 
of
 
injury
 
r

esulting
 
from
 
an
 
automatic
 
c

hange
 t

o
 S

TART
 
mode.
Do  not   open   the   bonnet   in   high   winds.
When   the   engine   is   hot,   handle   the  
e

xterior   safety   catch   and   the   bonnet  
s

tay   with   care   (risk   of   burns).
be

cause of the presence of electrical
equipment   under   the   bonnet,   it   is  
r

ecommended   that   exposure   to   water  
(

rain,   
w
ashing,   ...)   be   limited.
The location of the interior bonnet
release
 
lever
 
prevents
 
opening
 
of
 
t

he bonnet while the front left door is
closed.
Checks

213
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Petrol engines
The various caps and covers allow access for
checking  the   levels   of   the   various   fluids   and   for r

eplacing   certain   components.
1.
 P

ower
 s
teering
 r
eservoir.
2.
 S

creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant
 r
eservoir.
4.
 B

rake   fluid   reservoir.
5.
 B

attery/Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
10
Checks

214
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
* According to engine.
Diesel engines
The various caps and covers allow access for
checking  the   levels   of   the   various   fluids,   for  
r

eplacing   certain   components   and   for   priming  
t

he   fuel   system.
1.
 P

ower
 s
teering
 r
eservoir.
2.
 S

creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant
 r
eservoir.
4.
 B

rake   fluid   reservoir.
5.
 B

attery/Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
10.
 P

riming
 pu
mp*.
11.
 B

leed   screw*.
Checks

215
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Checking levels
The check is carried out either when the   ignition   is   switched   on   using   the  
o

il   level   indicator   in   the   instrument  
p

anel   for   vehicles   so   equipped,   or  
u

sing   the   dipstick.
Engine oil level
Checking using
the dipstick
Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless other wise indicated.
I f   a   level   drops   significantly,   have   the   corresponding   system   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
It
  is   normal   to   top   up   the   oil   level   between  
t

wo   services   (or   oil   changes).   CITROËN  
r

ecommends   that   you   check   the   level,   and   top  
u

p   if   necessary,   every   3   000   miles   (5   000   kms).A
  =   MA X
B
  =   MINIf you find that the level is above the A
  mark   or  
belo

w the B   mark,   do not star t the engine.
-

I
f the level is above the MAX
 
mark   (risk  
o

f   damage   to   the   engine),   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
-

I
f the level is below the MIN
 
mark,   you  
m

ust   top   up   the   engine   oil.
Oil grade
Before topping-up the oil or changing the oil, check   that   the   oil   is   the   correct   grade   for   your  
e

ngine   and   conforms   to   the   manufacturer's  
r

ecommendations.
Take
 
care
 
when
 
working
 
under
 
the
 
b

onnet,
 
as
 
certain
 
areas
 
of
 
the
 
engine
 
m

ay
 
be
 
extremely
 
hot
 
(risk
 
of
 
burns)
 
and
 
t

he
 
cooling
 
fan
 
could
 
start
 
at
 
any
 
time
 
(

even
 
with
 
the
 
ignition
 
off).
To
 
ensure
 
that
 
the
 
reading
 
is
 
correct,
 y
our
 
vehicle
 
must
 
be
 
parked
 
on
 
a
 
level
 
s

ur face
 
with
 
the
 
engine
 
having
 
been
 
off
 
f

or
 
more
 
than
 
30
 
minutes. Refer
 
to
 
the
 
"Petrol
 
engine"
 
or
 
"Diesel
 
engine"
 
s

ection
 
for
 
the
 
location
 
of
 
the
 
dipstick
 
in
 
the
 
e

ngine
 
compartment
 
of
 
your
 
vehicle.
F
 
T

ake
 
the
 
dipstick
 
by
 
its
 
coloured
 
grip
 
and
 
r

emove
 
it
 
completely.
F
 
W

ipe
 
the
 
end
 
of
 
the
 
dipstick
 
using
 
a
 
clean
 
n

on-fluffy
 
cloth.
F
 
R

efit
 
the
 
dipstick
 
and
 
push
 
fully
 
down,
 
then
 
p

ull
 
it
 
out
 
again
 
to
 
make
 
the
 
visual
 
check:
 
t

he
 
correct
 
level
 
is
 
between
 
the
 
marks
 
A
and B .
10
Checks

216
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Topping up the engine oil level
Refer to the "Petrol engine" or "Diesel engine" section for the location of the oil filler cap in the
engine
  compartment   of   your   vehicle.
F
 
U
nscrew   the   oil   filler   cap   to   reveal   the   filler  
a

perture.
F
 
A
dd   oil   in   small   quantities,   avoiding   any  
s

pills   on   engine   components   (risk   of   fire).
F
 
W
ait   a   few   minutes   before   checking   the  
l

evel   again   using   the   dipstick.
F
 
A
dd   more   oil   if   necessary.
F
 
A
fter   checking   the   level,   carefully   refit   the  
o

il   filler   cap   and   the   dipstick   in   its   tube.
After
  topping   up   the   oil,   the   check   when  
s

witching   on   the   ignition   with   the   oil   level  
i

ndicator   in   the   instrument   panel   is   not   valid  
d

uring   the   30   minutes   after   topping   up.
Engine oil change
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
In
  order   to   maintain   the   reliability   of   the   engine  
a

nd   emission   control   system,   never   use  
a

dditives   in   the   engine   oil.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
The
  brake   fluid   level   should   be   close  
t

o   the   "MA X"   mark.   If   it   is   not,   check  
t

he   brake   pad   wear.
Power steering
fluid level
The power steering fluid level should b
e   close   to   the   "MA X"   mark.   With   the e

ngine   cold,   unscrew   the   cap   to   check
 t

he   level.
Checks