204
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Programming
F Turn dial 1 to the "CRUISE" position: t
he cruise control mode is selected but
i
s not switched on (Pause).
F
S
et the programmed speed by
a
ccelerating to the required speed,
t
hen press button 2 or 3 (e.g.: 70 mph
(
110 km/h)); the cruise control system
i
s activated (ON).
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results in flashing of this speed in the screen.
Return
to the programmed speed, by means of intentional or
u
nintentional deceleration of the vehicle, automatically cancels the
f
lashing of the speed.
Exiting cruise control mode
F Turn dial 1 to the "0" position: the cruise control mode is d
eselected. It disappears from the screen.
F
S
top the cruise control system by pressing button 4
: this is
c
onfirmed in the screen (Pause).
Operating fault
You can then change the programmed speed using buttons 2 and 3
:
- b y + or - 1 mph (km/h) = short press,
-
i
n steps of + or - 5 mph (km/h) = maintained press.
If
storing speeds is available and activated on your vehicle, the
p
rogrammed speed will stop at the closest stored speed; refer to the
c
orresponding
s
ection.
F
S
witch on the cruise control again with another press on button 4. When the cruise control is switched on,
be
careful if you maintain the pressure
o
n one of the programmed speed
c
hanging buttons: this may result in a
v
ery rapid change in the speed of your
v
ehicle.
do n
ot use the cruise control on
slippery
roads or in heavy traffic.
on a s
teep descent, the cruise control
will not be able to prevent the vehicle
from
exceeding the programmed speed.
On
steep climbs or when towing, the
p
rogrammed speed may not be reached
o
r maintained.
To
avoid any risk of jamming of the
ped
als:
-
e
nsure that the mat is positioned
c
o r r e c t l y,
-
n
ever fit one mat on top of another.
In
the event of a cruise control malfunction,
t
he speed is cleared resulting in flashing of the
das
hes.
Have it checked by a CITROËN dealer or a
q
ualified
w
orkshop.
Driving
273
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
accessories
Conversion kits
You can obtain an "Enterprise" kit to convert a trade vehicle to a private car and vice-versa.
"Comfort":
door deflectors, side window blinds, rear
screen blind, insulated module, coat hanger
f
ixed to head restraint, reading lamp, mirror for
c
aravan, cruise control, scented air freshener
and
cartridges, parking sensors...
"Transport systems":
boot carpet, boot liner, boot net, boot spacers,
transverse roof bars, bicycle carrier, ski carrier,
r
oof boxes, towbars, towbar wiring harnesses...
"Styling":
gear lever knobs, aluminium foot rest, alloy wheels, wheel embellishers, chrome mirror
s
hells, chrome door
a
perture finishers, door sill
f
inishers, tailgate lower chrome finisher...
*
T
o avoid any risk of jamming the pedals:
-
e
nsure that mats are correctly positioned
a
nd secured,
-
n
ever fit one mat on top of
a
nother.
"Security and safety":
anti-intrusion alarm, microwave sensor, anti-tilt sensor, stolen vehicle tracking system, child
sea
ts and booster cushions, breathalyser, first
aid
kit, fire extinguisher, warning triangle, high
v
isibility vest, dog guard, pet seat belt, wheel
s
ecurity bolts, snow chains, non-slip covers,
front
foglamp kit...
"Protection":
mats*, seat covers compatible with l ateral a
irbags, door sill protectors, mud flaps, door
p
rotective rubbing strips, bumper protection
s
trips, protective covers for pets, vehicle
cover...
If
a
towbar
and
wiring
harness
are
fitted
o
utside
the
CITROËN
dealer
network,
t
he
installation
must
be
done
using
t
he
vehicle's
electrical
pre-equipment
a
nd
in
line
with
the
manufacturer's
r
ecommendations.
A
wide
range
of
accessories
and
genuine
parts
is
available
from
the
CITROËN
dealer
network.
These
accessories
and
parts
are
all
suitable
for
your
vehicle
and
benefit
from
CITROËN's
recommendation and warranty.
11
Practical information
394
C4-2_en_Chap14_index-alpha_ed01-2015
C4-2_en_Chap14_index-alpha_ed01-2015
Fittings, rear ..................................................112
Flashing in dicators ............... 1 22, 150, 244, 247
Foglamps,
f
ront
..................... 1
20, 127, 242, 247
Foglamps,
re
ar
..................................... 1
20, 248
Frequency
(radio)
................................. 3
01, 303
Front seats
..............................
........... 91, 92, 95
Fuel ............................................................... 209
Fuel
c
onsumption
........................................... 10
F
uel filler flap
........................................ 2
08, 210
Fuel
gauge
........................................ 1
2-14, 208
Fuel
tank............................................... 208, 210
Fusebox,
das
hboard
.................................... 25
3
Fuses
................
............................................. 2 51
E
Filling with fuel ......................................2 08 -210
Fitting a wheel ............................... ...............239
Fitting
roof
bars
........
.................................................... 262
Fittings,
boot
......................................... 11
3 ,
11
7
Fitting
sp
eakers............................................ 272
F
Coolant level .............................. ...................217
Courtesy lamps .....................................1 24, 133
Courtesy
mirror
............................................ 10
2
Cruise control
....................................... 1
99, 203
Cup holder
...............................
.....................104EBA
(Emergency braking assistance) ..........1
51
Eco-driving ...............................
.....................10
Economy
mode
...............................
.............260
Electric window controls
................................ 75
E
lectronic brake force distribution
(EBFD)
...............................
.........................151
Electronic
eng
ine
i
mmobiliser................ 64,
169
Emergency
b
oot
r
elease
.................................74
E
mergency braking system
..........................1
51
Emergency
c
all
............................ 1
53, 287, 288
Emergency
w
arning
lam
ps
..........................15
0
Emissions
control system, SCR
............2
4, 221
Energy
economy mode
................................26
0
Engine
c
ompartment
............................21
3,
21
4
Engine
c
ompartment
f
usebox
..............................
........................255
Engine,
Diesel
.......................2
09, 211, 214, 279
Engine
oil
......................................................2
15
Engine
oil level indicator
........................ 2
9, 215
Engine,
petrol
............................... 2
09, 213, 275
Environment
......... 1
0, 64, 80, 90, 190, 218, 228
Equipment
se
ttings
.............................3
7, 39, 45Gearbox,
automatic
..................... 1
83, 220, 258
Gearbox,
e
lectronic
.............. 1
79, 192, 220, 258
Gearbox,
m
anual
......................... 1
78, 192, 220
Gear shift indicator
...................................... 18
9
Gear lever, automatic
gearbox
.....................................18
3
Gear lever, electronic
ge
arbox
............................. 1
79, 220
Gear lever, manual
g
earbox
..........................................17
8
Glove
box
.....................................................10
2
Grab handles
............................................... 10
1
G
DAB (Digital Audio
B roadcasting) ....................3 04, 305, 366, 367
Date
(setting)
...............................
....... 38, 43, 48
Daytime
running lamps
.................1
19, 242, 246
Deactivating
t
he
p
assenger
a
irbag
..............15
9
Defrosting
...............................
.................. 89, 90
die
sel
...............................
..............................26
di
esel additive level
...................................... 2
18
Diesel
engine pre-heat warning lamp
...........26
D
igital Audio Broadcasting
(
DA B)
...............
..................304, 305, 366, 367
Dimensions
..............................
....................285
Dipped
be
am
...............................
..118, 242, 245
Dipstick
................
................................... 29, 215
Directional
l
ighting
............................... 12
6,
12
7
di
rection indicators
...... 1
22, 150, 242, 244, 248
do
ors
..............................................................
.71
Doors
em
ergency
c
ontrol
.....................................................5
7, 62
Door
pockets
................................................ 10
1
Driving
economically
..................................... 10
D
riving positions (storing)
..............................95
D
ynamic
em
ergency
b
raking
........................1
74
Dynamic
stability control (DSC)
...................15
2
D
alphabetical index
9
Driving9
C4-2-add_en_Chap09_conduite_ed01-2015
Memorising speeds
As a safety measure, the driver must only modify a speed setting when stationary.
This function allows speed settings to be registered which will then be offered as settings for two systems: the speed limiter (a maximum speed) and the cruise control (cruising speed). You can memorise up to six speed settings in the system, depending on version. By default, some speed settings are already memorised.
Activating the function
Modifying a speed setting
Go to the main menu by pressing the "MENU" button: Select the"Personalisation-configuration" menu and confirm. Select " Vehicle parameters" menu and confirm. Select the "Driving assistance" line and conform. Select "Speeds memorised" line and confirm. Select "Activation" to activate the function. Select the speed setting to be modified and
confirm. Modify the speed setting. Select " OK " and confirm to save the modifications.
With your Audio system
"MEM" button
Press this button to display the list of memorised speed settings.
Driving
10
C4-2-add_en_Chap09_conduite_ed01-2015
With the touch screen tablet
Press this button to select the " Driving " menu.
In the secondary page, press " Speed settings ".
Select the system for which you want to memorise new speed settings:
● s p e e d l i m i t e r
or
● c r u i s e c o n t r o l .
"MEM" button
Press this button to select a speed settings for use by the speed limiter or cruise control. Refer to the corresponding section.
Modifying a speed setting
Enter the new value using the numerical keypad and confirm. Confirm to save the modification and quit the menu.
Choose the speed setting to be modified.
Driving
14
C4-2-add_en_Chap09_conduite_ed01-2015
Cruise control
1. Cruise control mode selection wheel. 2. Button for setting the current speed of the vehicle as the cruise setting or lowering the cruise setting. 3. Button for setting the current speed of the vehicle as the cruise setting or raising the cruise setting. 4. Cruise control pause / resume button. 5. Display memorised speed settings button.
Steering mounted controls
6. Cruise control pause / resume indication. 7. Cruise control mode selected indication. 8. Cruise speed setting. 9. Selecting a memorised cruise speed.
Displays in the instrument panel
System which automatically maintains the cruising speed of the vehicle at a setting programmed by the driver, without any action on the accelerator pedal.
The operation of the cruise control can be interrupted (pause): - by pressing control 4 or by pressing the brake or clutch pedal, - automatically, if operation of the dynamic stability control system is triggered.
The cruise control is switched onmanually. It requires a minimum vehicle speed of 25 mph (40 km/h) as well as: - with a manual gearbox, the engagement of fourth gear or higher, - with an electronic gearbox, the gear selector at position A , or second gear or higher in manual mode, - with an automatic gearbox, the gear selector at position D or second gear or higher in manual mode.
Switching off the ignition cancels any programmed speed setting.
The cruise control system is a driving aid that cannot, in any circumstances, replace the need to observe speed limits, nor the
need for vigilance on the part of the driver. As a safety measure, you are advised to keep your feet near the pedals at all times.
9
Driving15
C4-2-add_en_Chap09_conduite_ed01-2015
Switching on
Turn the wheel 1 to the "CRUISE" position to select cruise control mode; the function is paused.
Adjusting the cruise speed
setting
The cruise control must be activated.
To start the cruise control and set a cruise speed, once the vehicle has reached the desired speed, press button 2 or 3 : the current speed of your vehicle becomes the cruise speed setting. You can release the accelerator pedal.
Pressing button 4 interrupts operation of the system (pause).
Pressing button 4 again restores operation of the cruise control (ON).
As a precaution, it is recommended that the cruise speed chosen be close to the current speed of your vehicle, so as to avoid any sudden acceleration or deceleration of the vehicle.
Take care: pressing and holding button 2 or 3 results in a rapid change in the speed of your vehicle.
To modify the cruise speed setting from the current speed of the vehicle: in steps of + or - 1 mph (km/h), make repeated short presses on button 2 or 3 , continuously, in steps of + or - 5 mph (km/h), press and hold button 2 or 3 .
To modify the cruise speed setting using memorised speeds and from your Audio system (only with the monochrome screen C): with the system first activated (see "Memorising speeds"), make a long press on button 2 or 3 , the system displays the memorised speed closest to the actual speed of the vehicle; this setting becomes the new cruise speed, to choose another memorised speed, make another long press on button 2 or 3 .
To modify the cruise speed setting using memorised speeds and from the touch screen tablet: press button 5 to display the six memorised speed settings, press the button for the desired speed setting. This setting becomes the new cruise speed.
Driving
16
C4-2-add_en_Chap09_conduite_ed01-2015
The use of mats not approved by CITROËN may inter fere with the operation of the cruise control. To avoid any risk of jamming of the pedals: - ensure that the mat is positioned
c o r r e c t l y, - never fit one mat on top of another.
Temporarily exceeding the
programmed speed
When required (overtaking manoeuvre...), it is possible to exceed the programmed speed by pressing the accelerator pedal. The cruise control is temporarily overridden and the programmed speed setting flashes.
To return to the programmed speed, simply release the accelerator pedal. Once the vehicle has returned to the programmed speed, the cruise control takes over again: the display of the programmed speed setting becomes steady again.
Only use the cruise control if the traffic conditions will allow you to drive for a certain time at a steady speed and at a safe distance from the vehicle ahead. Do not activate the cruise control in urban areas, in heavy traffic, on winding or steep roads, on slippery or flooded roads, or in conditions of poor visibility (heavy rain, fog, falling snow...). In some circumstances, it may not be possible to maintain or reach the programmed speed: towing, vehicle heavily loaded, steep climb.
When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the
programmed speed.
You may have to brake to control the speed of your vehicle. In this case, the cruise control is automatically paused. To activate the system again, press button 4 .
Switching off
Turn wheel 1 to the "0" position: the cruise control information disappears from the screen.
Operating fault
Flashing dashes indicate a fault with the cruise control system.
Have it checked by a CITROËN dealer or a qualified workshop.