2015 Citroen C4 AIRCROSS bonnet

C4-Aircross_en_Chap00a_sommaire_ed01-2014
direction indicators 141
Hazard warning lamps
1
41
H o r n


141
Braking assistance systems

1
42
Trajectory control systems

1
44
Front seat belts

1
46
Airbags
1

50
Child seats

1
55
Deactivating the passenger's front airbag

1
57
ISOFIX child seats

1
64
Child lock

1
70
Safety
Temporary puncture repair kit 1 71
Changing a wheel
1
75
Snow chains

1
81
Changing a bulb

1
82
Changing a fuse

1
88
12 V battery

1
94
Automatic power cut-off to accessories

1
97
Changing a wiper blade

1
97
Recovering the vehicle

1
98
Towing a trailer

2
01
Fitting roof bars

2
03
Accessories


204
Practical information
Bonnet 20 7
Petrol engines
2
08
Diesel engines

2
09
Fuel tank

2
10
Running out of fuel (Diesel)

2
12
Checking levels

2
13
Checks
2

16
Checks
Petrol engines 2 19
Petrol weights
2
20
Diesel engines

2
26
Diesel weights

2
27
Dimensions
2

33
Identification markings
2

35
Technical data
bluetooth® telephone
with voice recognition 2 37
Touch screen AUDIO -TELEMATIC system

2
49
TOUCH SCREEN AUDIO - CD system

2
89
AUDIO - CD system

3
11
Audio and telematics
Alphabetical index
Contents

6
C4-Aircross_en_Chap00b_vue-ensemble_ed01-2014
Instruments and controls
Opening the bonnet 207
Door mirrors
7
7-78
Electric windows
6
8 - 69Rear view mirror
7
9
Courtesy lamps
1
38 -139
Panoramic sunroof
7
0
Dashboard fuses
1
88 -190, 193
Instrument panel
1
2
Warning lamps
1
3-18
Indicators
33
-35
Audio- CD system screen
4
4
Setting the time
4
4- 45
Touch screen Audio- C
d

system screen
4
6
Setting the time
4
6 - 47
Audio-Telematic system screen
4
8
Setting the time
4
9 -50
Parking brake
1
02
5/6 -speed manual gearbox

1
03
Gear shift indicator

1
04
CVT gearbox

1
05 -109
Hill start assist

1
10
4 wheel drive system

1
18 -119Audio- CD system

3
11-334
Touch screen Audio- C
d

system
2
89 -310
Audio-Telematic system
2
49 -288
Ventilation
8
0-81
Manual air conditioning

8
2- 83, 88
Automatic air conditioning

8
4- 88
Demisting the windscreen
8

8
Demisting the rear screen

8
9
Hazad warning lamps

1
41
over view

9
C4-Aircross_en_Chap00b_vue-ensemble_ed01-2014
Maintenance - Technical data
Engine compartment
fuses 1 88, 191-193
Running out of fuel, Diesel

2

12
Checking levels

2

13 -215
-

oil
-
b
rake fluid
-
coolant
-

s

creenwash/headlamp wash fluid
Changing bulbs
1

82-187
-

front
-

rear Petrol engines

2

19
Petrol weights

2

20 -225
Diesel engines

2

26
Diesel weights

2

27-232
Dimensions
2

33
Off-road performance
2

34
Identification markings
2

35
Bonnet
20

7
Petrol engine compartment

2

08
Diesel engine compartment

2

09 Bat ter y
19

4 -19 6
Automatic cut of power supply to accessories

1
97
Checking components

2
16 -218
-
b
attery electrolyte
-
a
ir filter
-
o
il filter
-
p
article filter (
di
esel)
-
b
rake pads / discs
.
over view

25
C4-Aircross_en_Chap01_controle-de-marche_ed01-2014
one of the doors or the boot is not
properly closed.Close the door or the boot.
The opening in question is identified
in the screen.
The bonnet is not properly closed. Close the bonnet.
Fault with the electronic anti-theft
system. Switch off the ignition then start the
engine again.If the problem persists, contact a
CITROËN dealer.
The driver's door is open and the
ignition is still on. Switch off the ignition before leaving
the vehicle.
Screen 1 Screen 2
Cause Solution - ActionObservations
1
Monitoring

65
C4-Aircross_en_Chap02_ouvertures_ed01-2014
For all work on the alarm system,
contact a CITRoËn dealer or a
qualified workshop.
Alarm*System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring:
- perimeter
The system checks for any opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet...
- volumetric
The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle.
- tilt
The system checks for any change in the
attitude of the vehicle.
The alarm is triggered if the vehicle is lifted,
moved or knocked.
Self-protection function
The system checks for the putting out of
service of its components.
The alarm is triggered if the battery, the central
control or the siren wiring are put out of service
or damaged.
Locking the vehicle with full
alarm system
Activation
F Switch off the ignition (OFF mode if your
vehicle has the Keyless Entry and Starting
syste m).
F

R
emove the key from the ignition switch,
if your vehicle does not have the "
ke

yless
Entry and Starting" system.
F

L
eave the vehicle, and close all the doors
and the bonnet.
F

P
ress the locking button on the remote
control or one of the door or boot buttons
if your vehicle has the "
ke

yless Entry and
Starting" system.
Deactivation
Do one of the the following to deactivate the
alarm:
F

P
ress the unlocking button on the remote
control or one of the door or boot buttons
if your vehicle has the "
ke

yless Entry and
Starting" system.
F

S
witch on the ignition (ON mode if your
vehicle has the "
ke

yless Entry and
Starting" system).
F

O
pen a door or the boot while the system is
being activated.
The alarm system is deactivated: the indicator
lamp A goes off.
The alarm is being activated: the indicator
lamp
A flashes rapidly accompanied by
an intermittent audible signal for about
20
s
econds.
Once the 20 seconds have expired, the
system is active . The audible signal stops and
the indicator lamp in the button flashes slowly.
* According to equipment.
2
Access

108
C4-Aircross_en_Chap04_conduite_ed01-2014
Manual gear changing
In the automated mode, you can take over
control temporarily at any time using the
steering mounted controls.
The use of these controls permits manual
selection of the gears in situations which
require a faster change down than that offered
in automated mode (arrival at a roundabout,
exit from a car park with a steep gradient,
over taking...).
The gearbox engages the gear requested if
the engine speed permits it. The gear engaged
appears.
To return to the automated mode, do one of the
following:
-
p
ress the back of the "+/OFF" steering
mounted control 3 for approximately
2


seconds,
-

m
ove the gear lever quickly towards
position +/- and then return it to position D ,
-

s
top the vehicle.
Stopping the vehicle Operating fault
With the ignition on, if the message "Slow
down" or "Service required" appears in
the instrument panel screen, this indicates a
gearbox malfunction.
When a message is displayed, carry out the
following operations:
-

s
low down and stop your vehicle in a safe
place,
-

p
lace the lever in position P and let the
engine run,
-

o
pen the bonnet to allow the engine to
cool.
If the message disappears for a long period,
you can set off again.
If the message remains displayed or appears
frequently, contact a CITR
oËn

dealer or a
qualified workshop without delay.
Before switching off the engine, you must place
the gear lever in position P
.
You must apply the parking brake to immobilise
the vehicle.
driving

111
C4-Aircross_en_Chap04_conduite_ed01-2014
Stop & Start (Auto Stop & Go) function
Operation
Going into engine STOP mode
The "AS &G" warning lamp comes on in
the instrument panel or the instrument
panel screen and the engine goes into
standby after a few seconds:
-

w

ith a manual gearbox , with the vehicle
stationary and your foot on the brake, when
you put the gear lever into neutral and
release the clutch pedal.
Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key or the START/STOP
button. When the engine is stopped
automatically, the operation of certain
vehicle systems, such as for example,
braking, power steering... are modified.
Ta k e c a r e.
Special cases: STOP mode not
available
STOP mode is not invoked when:
-
t he driver's seat belt is not fastened,
-

t
he driver's door is open,
-

t
he bonnet is open,
-

t
he minimum time period of 30 seconds
since starting the engine has not elapsed,
-

t
he vehicle has not exceeded 3 mph
(5
km/h) since the last engine start,
-

t
he vehicle has restarted less than
10
seconds ago,
-

t
he engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-

d
emisting is active,
-

s
ome special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
-
the "AS &G" warning lamp is
flashing in the instrument panel.
This operation is perfectly normal.
The Stop & Start (Auto Stop & Go) function puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, or other...). The
engine restarts automatically as soon as you want to move off. The restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start (Auto Stop & Go) function reduces fuel consumption and exhaust emissions as well as the noise level when
stationary.
If you move the gear lever, the "AS &G"
warning lamp flashes, accompanied by
an audible signal.
The alert stops as soon as the gear
lever is returned to the neutral position.
4
driving

112
C4-Aircross_en_Chap04_conduite_ed01-2014
Going into engine START mode
The "AS &G" warning lamp goes off
and the engine starts automatically:
-

w

ith a manual gearbox , when you fully
depress the clutch pedal. For safety reasons or to ensure smooth
operation, START mode is invoked
automatically when:
Special cases: START invoked
automatically
- the speed of the vehicle exceeds 2 mph
(3 km/h),
-

y
ou open the driver's door,
-

y
ou unfasten the driver's seatbelt,
-

s
ome special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
If the system has been deactivated in
STOP mode, the engine will not start.
At any time, press the "AS &G O FF "


switch to
deactivate the system.
Deactivation
In this case the "AS &G" warning lamp
flashes for few seconds, then goes off.
This operation is perfectly normal.This is confirmed by the "AS &G O FF "
warning lamp coming on in the instrument
panel or instrument panel screen.
If the bonnet is opened while the engine
is in standby, the "AS &G" warning lamp
flashes, accompanied by an audible
signal. The engine will not restart
automatically.
To restart the engine with the bonnet
open, use the ignition key or press the
START/STOP button, while pressing
fully on the brake and clutch pedals.
driving