278
Berlingo-2-VP_en_Chap10b_Rd45_ed01-2015
The table below gives answers to the most frequently asked questions on your audio system.
Q UESTION ANSWER SOLUTION
With the engine off, the
audio
system switches off
a
fter a few minutes of use.When
the engine is switched off, the audio system operating time
d
epends on the state of charge of the battery.
The
switch-off is normal: the audio equipment switches to economy
m
ode and switches off to prevent discharging of the vehicle's
b
attery. Start the vehicle's engine to increase the battery
charge.
The
message "the audio
s
ystem is overheated"
a
ppears on the display.In
order to protect the installation if the surrounding temperature
i
s too high, the audio system switches to an automatic thermal
p
rotection mode leading to a reduction in volume or CD play
s
topping. Switch
the audio system off for a few minutes to
a
llow the system to cool.
Frequently asked questions
QUESTIONANSWER SOLUTION
There is a difference in
sound quality between the
different audio sources
(radio,
C
D...). For
optimum sound quality, the audio settings (Volume, Bass,
T
reble, Ambience, Loudness) can be adapted to the different sound
s
ources, which may result in audible differences when changing
s
ource (radio, CD...). Check
that the audio settings (Volume, Bass,
T
reble, Ambience, Loudness) are adapted to
t
he sources listened to. It is advisable to set
t
he audio functions (Bass, Treble, Front-Rear
Balance,
Left-Right Balance) to the middle
p
osition, select the musical ambience "None"
a
nd set the loudness correction to the "
ac
tive"
position
in CD mode or to the "Inactive" position
i
n radio mode.
Radio
audio and Telematics
154
Under the bonnet
DIESEL ENGINE
4.
Brake and clutch fl uid reservoir.
5.
Air fi lter.
6.
Engine oil dipstick.
7.
Engine oil fi ller cap.
8.
Power steering fl uid reservoir.
9.
Priming pump
(except BlueHDi engines).
1.
Screenwash fl uid reservoir.
2.
Fusebox.
3.
Engine coolant header tank.
Battery connections:
+ Positive terminal.
- Negative point (earth).
Take care when working under the bonnet.
160
Fuel
FUEL CUT-OFF
In a serious collision, a mechanism
automatically prevents fuel from
reaching the engine.
The fl ashing of this warning
lamp is accompanied by a
message in the screen.
Check that there is no odour or
leakage of fuel outside the vehicle and
re-establish the fuel supply:
- switch off the ignition (STOP
position),
- remove the key,
- put the key back in the ignition,
- switch on the ignition and start.
DIESEL PRIMING PUMP
If you run out of fuel, it is necessary to
prime the fuel circuit.
- Fill the fuel tank with at least fi ve
litres of Diesel.
- Squeeze and release the manual
priming pump, under the bonnet,
under the protective cover.
- Operate the starter until the engine
starts.
- Fill the fuel tank with at least fi ve
litres of Diesel.
- Switch on the ignition (without
starting the engine).
- Wait around 6 seconds and switch
off the ignition.
- Repeat the operation 10 times.
- Operate the starter to run
the engine.
BlueHDi engine
